Question about Zenith A27A11D 27" TV

1 Answer

Hello Again Thank you for the copy of the schematic you sent me for the last TV. Now i have another TV but it is a Zennith 27 inch and there were two parts that burnt up and now i can't tell what numbers were on them.  So i was wondering if you could help me out again possibly or if you know anyone that could.  So all i need to know are the two part numbers and they are both disk capacitors and they are located at the two points of CX3231 and CX3220. Thank yoiu for helping me out before and i hope you will be able to or if not hopefully someone can and thank you again i will be looking forward to you Reply  Bob24

Posted by on

  • Bob24 Aug 21, 2008

    the model number is A27A11D and where is the chassis number located?



  • Jaime Hernandez May 11, 2010

    What is the model and chassis number?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,267 Answers

Here are the values:
CX3231 022-08386-01 CAP, 270 PFD 10% 2000V, CERAMIC DISC
CX3220 022-08386-08 CAP, 1000 PFD 10% 2000V, CERAMIC DISC

Will send you the service manual if needed.

Posted on Aug 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Panasonic CT-27SL15 has scan lines on top 4 inches of screen, what is problem and how to fix?


Nov 2011 - Comment
Have similar problem on a Panasonic Tau model CT-27SL15.
It's a 27" CRT TV manufactured around 2005.

Other posts / solutions on this problem say possibly a capacitor going bad in the vertical circuitry / near the vertical IC / vertical blanking circuitry. Telephone call to a TV repair person mentioned something similar - "possibly a bad capacitor in the vertical circuitry".
Found a service manual online w/schematics and board layouts.
Panasonic Service Manual
http://dl.dropbox.com/u/35219914/PANASONIC%20CT27SL15.pdf
See pg 25 (of 42) - Deflection Schematic Diagram (Main PCB)
Shows: V Output IC - IC401
Finding the actual bad component(s) may not be so easy.
Anyway ... just wanted to add this comment.

Feb 11, 2010 | Panasonic CT-27SL15 27" TV

2 Answers

I need a copy of the schematics for my 9-inch color TV so my husband can fix it.


Well you need to look at the manufacture for this as we do not have diagrams here for TV as there old the newer ones I can find but the older oneswe do not have copies anymore due to the digital conversion.

May 25, 2009 | Standard (CRT) Televisions

1 Answer

To connect



thank you friend fixed it up thank you again


erich

Jan 24, 2009 | Standard (CRT) Televisions

1 Answer

TV will not turn on


Hello,

I am by no means an expert but i have the same type of TV and have a similiar problem, first I thought it might be a heat-induced effect so I vacuumed the interior but no joy--then I carefully inspected the main board and found two components that looked melted. So I would suggest you vaccum the interior and then inspect. But be careful as I found one capacitor on the board that still had a charge after 3 days of the set being turned off, you might want to verify things with a multimeter before poking around.

--Hank Rausch

Jun 15, 2008 | RCA TruFlat 27F520T 27" TV

1 Answer

Power light flashes 3 times


more than likely the sony has a bad flyback
It is available from
www.electronix.com
Thanks Guy

May 19, 2008 | Sony FD Trinitron WEGA KV-27FS100 27" TV

1 Answer

Venturer PLV 1615 15 inch LCD TV


The problem is in the power supply. If I had a schematic I could fix it myself. Can anyone tell me where I can get a schematic? I sent several emails to Venturer support but they don't reply. Benjamin

Mar 26, 2008 | Standard (CRT) Televisions

1 Answer

Broken RF Connector


you would have to get a new part for it. try looking online and out in your model number and put in rf connector needs replacing

Mar 10, 2008 | Apex Digital AT2002S 20" TV

1 Answer

H.V shuts down/


try to check a bad conections in hv transformer and capacitor around them

Feb 01, 2008 | Zenith B27A11Z 27" TV

1 Answer

Purchase of the RCA F27252GY 27 INCH TV


My set of the same model shows a build date of 1998. New 27 inch basic sets sell for 100+/- on sale at varius stores. I'ld say the value is no more than $25. for a 9/10 year old working table model TV

Nov 16, 2007 | RCA F27252GY 27" TV

1 Answer

Broken RF Connector


Its fixable. the question is how much of the inside broke with it. cost for repair on that usually averages 45 to 65 dollars... unless tuner is damaged in most cases not. if not hooked to tuner then maybe a new isolation block..simple job Good luck

Mar 09, 2006 | Zenith C27A24T 27" TV

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

182 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zenith Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68301 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Anastasio Benjou

Level 2 Expert

99 Answers

Are you a Zenith Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...