Question about Sylvania 6520FDE 20 in. TV/DVD Combo

4 Answers

How to connect a Time warner cable remote to the tv

Ive been trying unsucessfully for 2 hours to connect my remote control to the tv, the controller is from a Scientific Atlanta Explorer 4240HDC, ive tried all the codes in the controllers user guide, no luck, any ideas

Posted by on

  • cdh0926 Aug 22, 2008

    i tried every code from all those sections, no luck =(

  • Anonymous Dec 20, 2008

    this **** gets me maddddddddddddddddddd

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I made mine work by using programing the vcr button as opposed to the tv.

Posted on Dec 23, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I cannot program my remote to get on TV. My remote is a Time Warner cable URSU-8400AWC,

Posted on Dec 02, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I am on direct tv and have a sylvania model # 6520dfd tv/dvd combo and can't get my direct tv remote to set to turn on or off and volume if you can help me i will be pleased thank you Dennis

Posted on Dec 02, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 51 Answers

Try the codes for Philips Magnavox, and symphonic. You might try Funai if those fail to produce results.

Posted on Aug 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I find the source button on the remote


      If your Sky remote is linked with your TV (controls volume) then all you have to do is press the "TV" button in the top left had corner and then press the "help". This will then bring up your source menu on the TV and you just need to continue pressing the "help" button to cycle through your different sources.

      Where is the source button on the remote control? - Sky Community

      helpforum.sky.com/t5/...source-button-on-the-remote.../643952 Sky plc
    Feedback

    What Is The Source Button On A TV Remote? ' Yahoo Answers

    https://answers.yahoo.com/question/index?qid...
    May 24, 2010 - Yep. It's a pretty x question but who cares? I was wondering...what does it say(the source button)? I'm trying to figure out which button it is ... Urgent !!!!!!!Where is the " Source" or "Input" on the Sony Bravia ...
    Jan 12, 2011
    what do i need to press on the comcast remote to switch over so i ...
    Jan 11, 2010
    Change tv video source using Time Warner remote control?
    Sep 17, 2009
    More results from answers.yahoo.com

Feb 08, 2016 | Venturer KLV3915 15.4-Inch Undercabinet...

1 Answer

What is the comcast cable code for this tv for the digital box


Hello

Comcast remote codes for Emerson TV are:-


?
10154, 10451, 10236, 10463, 10180, 10178, 10171, 11963, 11928, 11913, 11911, 11909, 11905, 11665, 10282, 10280 10270, 10183, 10181, 10179 10177, 10038, 10019
You have to check with each code, until you find which code sets for your TV


?
programming TVcontrol
The Comcast Digital Adapter remote control is pre-programmed at the factory to operate the Digital Adapter. The Comcast Digital Adapter remote also contains a universal TV library to allow you to control the Power and Volume of your TV.
1. Turn on the TV
NOTE: Please read steps 2 to 4 completely before proceeding. Highlight or write down the codes and device you wish to program before moving on to step 2.
2. Press and hold SETuntil the Red Light blinks twice, then release SET.
3. Locate the code for your device in Manufacturer's Codes on the back of this user guide. Brands are listed in alphabetical order with the most popular codes listed first.
4. Enter the first five-digit code for your TV. If you perform this procedure correctly, the Red Light will blink twice
NOTE: If you enter an invalid code, the red light will display one long blink and exit the programming mode. Repeat steps 2 to 5 with a valid code.
5. Aim the remote control at your TV and press Power once. The device should turn off. If it does not respond, repeat steps 2 to 4, trying each code listed for your brand until you find one that works. If it still does not work, try Searching For Your Code.


?
Searching For Your Code
If your brand of TV does not respond to the remote control after trying all of the codes listed, or if your brand is not listed at all, try searching for your code.
1. Turn on your TV.
2. Press and hold SETuntil the Red Light blinks twice, then release SET.
3. Enter in 9 - 9 - 1. The Red Light will blink twice.
4. While pointing the remote control at the TV and press and release the CH + key until the TV turns off. (Note: You may need to press [CH+] numerous times).
NOTE: In the search mode, the remote control will send IR codes from its library to the TV.
5. Press SETonce to lock in the code. The Red Light will blink twice.
OK.


Dec 03, 2010 | Emerson EWC1303 13 in. TV/VCR Combo

1 Answer

I have a sharp tv/vrc combo without a remote. I'm using a universal remote but wont let me get into the menu. I need to change it from cable to air. Can someone help?


For sharp TV-VCR Combo with universal remore control,

1/ Start by pressing SET & TV at the same time, the LED goes solid RED

2/ Press 009 or whatever code works for your TV.

3/ Confirm that you can now use your control to flip channels..

Then,
4/ Just press the blue button 2-/12. That allows you to change from cable to air and vis-versa. Hope that helps.

Ade

Jul 04, 2010 | Sharp 13VT-R100 13 in. TV/VCR Combo

12 Answers

Avol TV remote


I own an AVOL 19in TV, I just got my comcast cable hooked up; I too was plagued by initially having to use my other remote to turn TV/volume on/off up/down. Being the code is not listed in the Comcast universal remote instructions, in the above answers someone mentioned APEX as a parent company with AVOL; I was able to use a code from the APEX codes listed in the Comcast universal remote instructions to get the controller to work with turning the TV power on/off and volume control. The code that worked for my particular TV was 10765. Try these codes for your TV to see if they work- 10748, 10879, 10767, 10890. Hope this helps.

Mar 17, 2008 | Combination Televisions

2 Answers

Magnavox 20" tv with vcr and dvd, Model #CT202MW8


call comcast they should know the correct code its there unit.

Jan 17, 2008 | Philips Magnavox 20MC4304 20 in....

1 Answer

DTV remote code


KZXten,

Don't know if this will help but I have Comcast as my cable TV provider and am using a Motorola DCT-6200 STB and the remote Comcast provides with the STB. To get my Panasonic TV/VCR combo (PVQ-2510A) to work with the Comcast remote I had to do the following:

1) Do the remote code search in AUX mode (or VCR or DVD mode if your remote has that button instead) using the instructions for searching ing remote codes. I had to toggle back and forth between AUX and POWER on the remote until the TV turned off. I saved that code on the remote, but it only controlled the power on the TV, not the volume control.

2) Next I did the remote code search using the TV button on the remote and toggled between the TV button and the volume control until the volume +/- bar appeared on the screen. I saved that code too.

I use the AUX button to turn the TV on and off. Once the TV is on the volume control on the remote operates the TV volume normally. I still need to toggle between CABLE and AUX depending on which device I'm controlling, the cable Set Top Box (STB) or the TV. You may have to experiment some to get it to work correctly.

Here's a link to the remotes Comcast is providing in my area.

http://www.comcast.com/corporate/customers/customer_support/remotes.html

Dec 23, 2007 | Panasonic PVQ-2510 25 in. Combo

2 Answers

Code for Direct TV remote control


Program AV1 with 20695, program TV with 10765, then switch to AV1, press select/mute, enter 933, and press select

This will allow volume and mute controls while in DTV mode and allow power on and off while in TV mode. This worked for me on the RC32 remote control.

Best of luck

Nov 08, 2007 | Toshiba 14DLV75 14 in. TV/DVD Combo

1 Answer

SYLVANIA SRCD227 REMOTE CODE


First tell me what brand tv and date of mfg & model# maybe I can help. Chuck Recharge1@sbcglobal.net

Sep 20, 2007 | Sylvania SSC719C 19 in. TV/VCR/DVD Combo

Not finding what you are looking for?
Sylvania 6520FDE 20 in. TV/DVD Combo Logo

2,880 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sylvania Combination Televisions Experts

The Knight
The Knight

Level 3 Expert

68202 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Cindy Wells

Level 3 Expert

4754 Answers

Are you a Sylvania Combination Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...