Question about Dishwashers

1 Answer

Proline pdw080/pdw081s overflow protection activated

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My proline dishwasher wont stop filling up

Posted on Aug 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Proline dishwasher SDW800PW/S


where is the element housed in Proline dishwasher sdw800pw/s please

Aug 13, 2012 | Pro Line SDW800PW Dishwasher

1 Answer

Code 15


This is indicating a flood issue the flood switch in the base pan is activated. remove the unit from under the counter take the left side off. Dry the water up then watch it to see were it is leaking from.

The float switch/level sensor in the rinse boiler has not activated. This could be a faulty solenoid not letting the water in (assuming the isolating valve is turned on), or a faulty float switch/level sensor. This would result in water overflowing through the rinse arms and the overflow in the rear of the wash tank.

Hope helps.

May 13, 2011 | Dishwashers

1 Answer

I have an LSv66 Ariston dishwasher. When it is switched on, no matter what program, the knob just stays in the same position. It sounds as if the dump pump is running constantly.


The dishwasher overflow detection may have triggered. This causes the drain pump to operate.

The overflow float is located at the base of the diswasher and maybe faulty. It is spring loaded float and should move down and up when pressed. If you cannot find this in your model, then water has leaked into the overflow cavity where the motors are located. This could also trigger the overflow protection circuit.

You have to replace the overflow float if it exists or empty the overflow water in the overflow cavity and dry it out. If leak is taking place then the gasket needs replacement.

Hope you are able to fix the problem with some of the suggestions I have made.

Please rate the solution if you find it helpful otherwise post a comment.

Oct 11, 2010 | Ariston Technologies LL64WNA Built-in...

1 Answer

Where can I get an instuction manual for a proline table top dishwasher?


http://www.espares.co.uk/usermanuals.aspx


type model number and brand in and away u go eg;
proline
pdw041

Apr 01, 2010 | Dishwashers

1 Answer

I need an operation manual for a proline logic dishwasher


  1. Download User Manuals | eSpares Proline EF9000B/1 Spares & accessories for this model. No user manual available for this model. Proline EF9000B/2 Spares & accessories for this model ...
    www.espares.co.uk/usermanuals.aspx?c=1084&ma=1169&mo=451471&sa=1 - 50k - Cached - Similar pages
  2. how to mend it .com - problemswith proline logic dishwasher? Other users of howtomendit.com provide the answers. ... Proline logic dishwasher all the lights are flashing and it will not fill or empty what is the ...
    www.howtomendit.com/answers.php?id=196053 - 58k - Cached - Similar pages

OR CONTACT THE COMPANY DIRECTLY AND ORDER ONE

Apr 30, 2009 | Dishwashers

1 Answer

Dishwasher


how can i camcel a cycle on a thermadore dishwasher

Aug 13, 2008 | Dishwashers

2 Answers

Bosch SMS4012GB dishwasher. Refused to fill. Found tray full of water in base of unit. Mopped up water about 2 litres. Machine works but lower reservoir on the side of the machine with float switch...


An electric switch activated by air pressure. This device detects air pressure exerted on it through a flexible tube connecting it to part of a water tub.
When activated, this switch then opens an electrical circuit stopping further filling of water into the machine.. May also be called a PRESSURE SWITCH. if not activated definately it will cause overflow.

Check the wire harness to the pressure switch. or tap your float switch with finger tips may be it get stacked. if nothin happen replace the pressure switch.
Rate my solution if useful.

Prince P

Jul 24, 2008 | Dishwashers

1 Answer

Proline W1000 washing machine keeps on triping main electrical switch


check for water leaks,unplug heating element,and try again.or the motor,then try again.

Mar 28, 2008 | Beko 24 in. D3421F Free-standing...

10 Answers

Flood protection is activating


Had the same problem on a Miele mashing. In my case trying to clear a drain blockage in a kitchen sink had probably forced water back into the washing machine and caused an internal leakage. Rather than remove the whole machine and tip it over, I opened the small panel at the front bottom (behind the skirting panel) (needs 'special' screwdriver for the 2 screws) and removed the water that was lying on the base of the machine. Not much (less than 5mm) but enough to lift the white polystyrene float (a round disc about 10cm diameter) which was activating the micro-switch and causing the F70 message.

Oct 29, 2006 | Zanussi 24 in. DE6850 Free-standing...

Not finding what you are looking for?

Open Questions:

Dishwashers Logo

Related Topics:

618 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...