Question about Panasonic PT-53WX53 53" Rear Projection HDTV-Ready Television

1 Answer

Bad Picture Has color seperation, warped at bottom of screen with double image

Posted by on

  • mag1997 Sep 06, 2008

    I have the same problem, Double image in blue color. The image in blue is off center and the bottom looks like it is warped. The tv is 5 years old.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Panasonic Master
  • 8,617 Answers

You need to replace both STK392-110 Convergence ICs. You can get replacemnet ICs at the following link with free installation instructions and free tech support. You will need two of the ICs. Heres the link.
http://servicemanuals.vstore.ca/

Posted on Aug 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Warpped TV picture


There are two problems here but may be caused by one component

The flyback transformer or transistor equivalent is faulty The colors are warped convergence controls which may be due to a faulty sustain board or part of the first problem. DIY is not an option and repair estimate is about $3-400.00

Please rate my help++++Thanks for uyisng FIXYA

May 29, 2010 | Sony KP-46WT510 46" Rear Projection HDTV

1 Answer

The screen has a double image and also has a


u have bad convergence , this is a problem from the deflection board , the repair of this repair is about $250

Apr 23, 2010 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Images on screen are doubled. Everything


u have bad convergence ic stk392-110 or stk392-150

Apr 13, 2010 | Hitachi 53UWX10B 53" Rear Projection...

1 Answer

Samsung HCN4727W Rear Projection TV, green screen, audio works


These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony, Samsung,JVC,Philip Magnavox,Panasonic,Akai2_bing.gif,Pioneer, Hitachi,Mitsubishi,Zenith and others.
You can get more information and a DIY convergenece repair kit with instructions from the link below.

Here are some of the most common problems with these sets...

Problem #1) Convergence

Yours may have one or more of the following symptoms...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2 - Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

bb0cf99.pngYou can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Jul 10, 2009 | Samsung HL-R4667W Rear Projection...

1 Answer

Hitachi 42" Wide Screen TV - color seperation, double images


Replace Both of your convergence ICs they are big black ICs and ck resistors RK4246,50,54,58,62 i have the values if you need them they are 1.5ohms up to 3.9ohms.ICs will have STK392-110s if this is the number on yours upgrade to 180s

Feb 19, 2009 | Hitachi 43GX01B 43" Rear Projection...

1 Answer

Fixing colors and picture


There is 3 resistors you need to CK 2.7ohms, near ICs most of the time you will fined 2 of them bad.

Jan 10, 2009 | Samsung HCN653W 65" Rear Projection...

1 Answer

Toshiba 50H81 projection television


Projection sets have two very common problems.

The first common problem is convergence


These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony, Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer, Hitachi,Mitsubishi,Zenith and others.
You can get more information and a DIY convergenece repair kit with instructions from the link below.

Here are some of the most common problems with these sets...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2 - Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

bb0cf99.pngYou can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Oct 22, 2008 | Toshiba 50H81 50" Rear Projection...

1 Answer

Hitachi Mo# 53uwx10ba double image


These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. This is called convergence.

When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. Convergence problems are very common on all Projection TV sets including Sony, Samsung,JVC,Philip Magnavox,Panasonic,Akai,Pioneer, Hitachi,Mitsubishi,Zenith and others.
You can get more information and a DIY convergenece repair kit with instructions from the link below.

Here are some of the most common problems with these sets...

Problem #1) Convergence

Yours may have one or more of the following symptoms...

*Screen Looks 3-D
*Colors wont align
*Screen may look distorted or warped
*No Audio/Video - TV Shuts down - May also make a constant chirping sound

Problem #2 - Another common problem is dull or washed out video.

Your set may have one or more of the following symptoms....

*Dull looking picture
*White looking picture
*Halos around objects
*Red/Orange looking picture

bb0cf99.pngYou can see some more examples and find a fix using this link on Fixya http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Sep 07, 2008 | Hitachi 53UDX10B 53" Rear Projection...

1 Answer

45" Rear projection image warping


you can check the self diagnostic test by going to ctechnicians.com

Dec 22, 2007 | Mitsubishi VS-45607 45" Rear Projection...

Not finding what you are looking for?
Panasonic PT-53WX53 53" Rear Projection HDTV-Ready Television Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Josh Whitehead
Josh Whitehead

Level 3 Expert

1146 Answers

The Knight
The Knight

Level 3 Expert

68197 Answers

Are you a Panasonic Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...