- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Use following steps to setup your tata photon. 1.First connect usb modem to router via your LAN. 2.now open web browser. 3.If asked for username and password, juts enter default username and password that you get with used guide. 4.Now open WAN setting. 5.Now select AutoPan. 6.Obtain DNS server address automatically. 7.Now save setting and restart your computer
You have to use following steps to activate the modem through Account Tool: 1.First put data card in the system. 2.Now open Account tool option. 3.There you will find three option like MIN, SUB ID, SPC. 4.Now in the SPC type 000000 and press write button. 5.Now close the dialog box and restart computer.
Use following steps to Install and Activate TATA Photon on your computer. 1.First connect your TATA Photon USB modem to your computer. Now wait for few minutes until drivers of your USB modem installed in your computer. 2.Now go to the device manager and check whether your modem is configured or not. Now go to the modem properties and in the advanced option type 'AT+CRM=1' . It is used to modem faster. 3.Now install the Huawei software manager. 4.Now check whether device is identified as 'HISA' or not. 5. Now go to the activate option. Now type *228 and click on the activate button. If asked for password, just type "0000" as default password.