- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hello, The following error codes cannot be reset by merely turning off and then on the main power. They require resetting in service mode: E000, E001, E002, E003, E004, E032, E717 1) Start service mode, and select COPIER>FUNCTION>CLEAR>ERR. 2) Press the OK key. 3) Turn off and then on the main power. 2. Error codes other than the above may be reset by turning off and then on the main power. n Detail Code Some error codes offer detail codes, which may be checked in service mode: COPIER>DISPLAY>ERR (3rd block from the right
To enter the service mode:
1) Press the asterisk key ' ' on the control panel. 2) Press '2' and '8' on the keypad at the same time. 3) Press the asterisk key ' ' on the control panel
Hope that helps!
PS If not you have problem in fixing unit, probably the fixing thermistor and need to be replaced.
You cannot restore the key operator code for the Aficio 1060/1075. You can delete the code and then write new one . Follow the instructions and will be easy. 1. enter the service mode. 2. To enter the service mode press one after other the follow keys on the control panel of the copier. press the yellow key [ Cancel Modes] than press the number one after other -- on the number keypad of the copier and than press and hold the red key [ Clear \ Stop] until on the touch screen do not appear the service menu after the service menu will appear press on the touch screen [Copy Sp] up in the right corner has a touch key [sp direct] press that key and press the follow numbers on the number keypad which are 7810 and then press "#' on the number keypad. on the screen will appear "execute" press the touch button and than by pressing "exit" several times you will exit from the service mode. NOTE: "PLEASE DO NOT TOUCH NOTHING ELSE IN THIS MODE IF YOU ARE NOT A SERVICE TECHNICIAN BECAUSE BY PRESSING SOMETHING YOU MAKE SOME ERROR OR OTHER PROBLEM" After clearing the key operator code you may enter new one.
Hi, This can be either of three main thing. 1. The machine detects the film out of place and needs to be reset, you do this by activating the service mode. Insert paper clip into hole (inside machine), then * * and service mode shud activate, then click error code and clear all errors.
2. The film is out of place, the fuser needs to be removed and the film manually moved back to the hope position
3. The film is torn and needs to be replaced (LONG WORK AHEAD)[/code]
Try 08-600 sub code of 2. This is a reanitilazation of the HDD it may help you out. If it errors and does't tell you to reboot then your hdd is shot. after this code you will lose all fax presets and templates stored on machine. also just try a reboot.