- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Passkey to pair
PUT THE HEADSET IN PAIRING
The headset indicator light will be steadily lit in
purple when in pairing mode. To place the
headset in pairing mode:
If the headset has never been paired with
another device, simply open the headset
boom. The indicator light becomes steadily lit
If the headset has previously been paired
with other devices, first ensure those
devices are turned off.
Then open the headset
boom and the indicator light flashes in blue.
After about 5 seconds, the indicator light
becomes steadily lit in purple.
DEFAULT PASSKEY is 0000 (four Zeros)
Rate my solution please
I have a Sprint Blackberry 8830 and a Motorola H500 headset which I no longer have the instructions for. My Blackberry wouldn't find the device. Through trial and error I found that, to pair the headset with the Blackberry, I had to press and hold the call button until it was solid blue, then the Blackberry found it. The passcode is 0000 for this one.
most bluetooth earpiece pass keys are 0000 or 000000. Hold the device power button down until the lights flash two colors, then locate device with the blackberry. Enter either of the two codes and see which works. Normally you can not change the code on the earpiece, but you can on the phones.