Question about Kodak EASYSHARE 5500 All-In-One InkJet Printer

1 Answer

Just installed, papper jam won't turn off,can't calibrate

Just installed 5300, can't calibrate printer. tells me i have a papper jam; I do not. won't turn off. help 1

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,011 Answers

Uninstall the software and install it and upgrade the firmware it will be solved most of the problems

upgrade the firmware from below link

http://www.kodak.com/global/en/service/downloads/dln_ekn033540.jhtml?downloadStep=s2&selectedDownload=dln00182&operatingSystem=windows_vista&selectedLanguage=es&downloadLanguage=en


download the software from this link and install it....

http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=130&CID=go&idhbx=easysharesw&pq-locale=en_US&_requestid=592




sir once we finish this chat you will be asked to rate the chat. that time please dont forget to give a good rating
and review. because many customers dont rate the chat and we experts are left with no credits for providing a
solution.

so please dont forget to rate the chat after end of the session. this is just a information to you. always use end
session button to end the session.

thanks
good luck

Posted on Aug 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung ml-3560 will not initialize


hi,please cheque printer papper jam & please take the jamed papper after printer is turn on to contiue see the error please replace the high voltage power supply

Mar 29, 2014 | Samsung ML-3560 Laser Printer

1 Answer

Just installed new printhead and new black and colored ink cartridges. I do not have a calibration calibration sheet any longer. This is for Kodak easyshare 5300 printer.RAU


When you install new printhead in the printer, you will get a message" New printhead detected ,load papers in paper tray and press start. If u do not get this message,that means you have not installed printhead properly. Visit www.kodak.com/go/printheadsupport and click on 3 rd link installing or replacing a printhead to see how to install printhead correctly

Dec 03, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Cannon ip 1800 printer


hi, your paper feeder might be jammed, try seeing if your little wheels turn properly (where the paper is fed) let me know..

Sep 10, 2009 | Canon PIXMA iP1800 InkJet Photo Printer

1 Answer

Printer papper jam cant see any papper mfc-240c


Did you remove the rear cover and check for paper there? If it still shows a jam and there's absolutely no paper inside the printer, you may have to shut it off (or unplug it if it won't turn off), wait a few seconds, and turn it back on to clear the jam detection.

Sep 05, 2009 | Brother MFC 240C All-In-One InkJet Printer

3 Answers

Kadak Easy Share 5300 printer. Screen reads "Please wait"-stuck


Try this one
Take out the inks and printhead
Leave the cartridge door open, then unplug the power cord from the back of the printer while the access door is open
Close the cartridge door once the cord is unplugged
Reconnect the powercord, turn on the printer, then your printer will look for your printhead "Printhead missing or not installed correctly..."
Then put everything back. make sure it will snap in to place. Then print a calibration page, then scan it. This is just over writing the error message.
Thanks Josh - Kodak Tech Support

Aug 12, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Kadak Easy Share 5300 printer. Screen reads "Paper Jam Clear Jam


Try this one Take out the inks and printhead Leave the cartridge door open, then unplug the power cord from the back of the printer while the access door is open Close the cartridge door once the cord is unplugged Reconnect the powercord, turn on the printer, then your printer will look for your printhead "Printhead missing or not installed correctly..." Then put everything back. make sure it will snap in to place. Then print a calibration page, then scan it. This is just over writing the error message. Thanks Josh - Kodak Tech Support

Aug 12, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

PRINTER JAM


look for small, small pice off papper in the printer where pappers pass tru

Sep 29, 2008 | Dell 1720dn Laser Printer

3 Answers

Not printing


cancel all the pending documents pending in the print queue.then try

Aug 16, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

2 Answers

5300 kodak eazyshare printer


Well, here is the proper way of fixing or troubleshooting that paper jam error in your printer

Open the printer access door and remove both of the ink cartridge, then remove also the printhead, after that close the printer access door, without those parts. Then it will show a message in the printer screen, "Printhead is missing or has come loose" or "Printhead Not Detected" Install the printhead, just the printhead without the ink cartridges. After that close the printer access door. Then it will show you a message"Ink cartridges is not installed,install ink cartridges". then open again the printer access door, then install the black ink cartridge without the color ink cartridge. then close the printer access door, then message must be " Color ink cartridge is not installed, install color ink cartridge" then install the color ink cartridge." the message must be,"New printhead is detected calibration require, load paper and press start"

Thats the way of overiding the paper jam error message of your kodak all in one printer
hope this will help you guys

by: E.brown

Happy Printing(", )
Kodak AIO tech support 1-800-421-6699

Jun 04, 2008 | Kodak EASYSHARE 5500 All-In-One InkJet...

1 Answer

5300


I have seen this when I have stored/used my printers in a humid location - in my case, my basement home office. The paper edges curl enough to interfere with the grippers and/or cause paper jams.
Make sure you have new, dry paper (perfectly flat) in the tray and try again. If this solves the problem, you may want to try to relocate your printer to a dryer location.
Good luck.
DigiChick

Jun 02, 2008 | Kodak EASYSHARE 5500 All-In-One InkJet...

Not finding what you are looking for?
Kodak EASYSHARE 5500 All-In-One InkJet Printer Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Printers & Copiers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Michel Smith

Level 3 Expert

1218 Answers

Sajid Najmi
Sajid Najmi

Level 1 Expert

31 Answers

Are you a Kodak Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...