Question about Ricoh FAX4700L Plain Paper Laser

1 Answer

Error Message The screen is displaying Replace PC What do I need to do? Thanks

Posted by on

1 Answer

All I did was answer yes to the question and now the message is gone.

Posted on Aug 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have canon IR-2270, it does not work properly, its screen shows this error message: E000003-0000 please let me know what does it mean and how to solve it. thanks.


Hello,
the E003 is error code related to fixing unit trouble, in this case with temperature that is too low after the copier is out of standy mode.

You can try to reset the error over service mode:

press asterix key (*)
press 2 and 8 and hold for 3 sec
press asterix key

Choose: COPIER-FUNCTION-CLEAR-ERR, turn the copier on and off again.

If this doesn't helps, you need to replace the fixing heater and clear the error.

Aug 02, 2011 | Fax Machines

1 Answer

Machine reads document jam,checked machine seems ok,cannot sent fax.


Hi there!
The error message that you are getting means there's a jammed paper inside the machine particularly in the feeder. This may also appear if the panel is not closed securely. Try to open the control panel and look for any pieces of jammed paper or debris. Closed the front cover or the control panel, it should display the regular screen date/time. Once you have the regular screen load the document on the feeder, the display should change and should ask you to enter the fax number.
Hope this helps!
Please rate if it worked, Thanks

Mar 30, 2011 | Fax Machines

1 Answer

REMOVE PAPER MISFEED


There should be 2 switch actuators sticking up underneath of the toner cartridge, maybe you knocked one off?

Mar 30, 2010 | Panasonic PanaFax UF-8000 Laser Fax

2 Answers

Unable to clean 50 error


I have a Brother MFC-440CN fax machine and I am receiving error message "unable to clean 50". Can anyone help me to fix this error problem

Jan 13, 2010 | Brother Fax Machines

1 Answer

CALL FOR SERVICE MESSAGE ON A MURATEC MFX1200


Yes the Call Service Message on Muratec is directly tied to Imaging Unit replacment. Especially if you are not getting any codes in the display.

Oct 20, 2009 | Muratec F320 Plain Paper LED Fax

1 Answer

Toshiba Super G3, e-Studio 170F


Fax display screen always reads, "Auto receive". When attempting to fax, the busy light flashes. Busy light stops flashing for 30 seconds, then starts flashing again.
Above is the default settings for the fax.

NGB0 indicates signal error or line condition error.
U need to check the phone line. U can hook any single line phone to the phone line, check for tones without background noise.

Sep 10, 2008 | Toshiba e-Studio DP170F Plain Paper Laser...

1 Answer

Error #1203


Error #1203

A 1203 error message on the operator panel could indicate a problem with one of the ink cartridges. Please carry out the steps below the image to confirm that this is a cartridge failure rather than a hardware problem
  1. Make sure the All-In-One is powered on.
  2. Pull the control panel towards you, and then open the cartridge access door. The print cartridge carrier moves and stops at the loading position.

  3. Pull the old cartridges towards you, and then lift them out.
  4. With the cartridges out of the printer, shut the access door and the control panel.
  5. Power the printer OFF and then back ON.
  6. Check the operator panel to see if the same error has returned or if a new message has appeared.
  7. If the message displayed is 1203, there is something wrong with the printer hardware.
    If the message now displaying is Cartridge Missing, do the following:
    1. Reinstall the cartridges into the printer.
    2. Insert the color cartridge in the left carrier. Insert the black cartridge in the right carrier.
    3. Push back firmly on the cartridges until they snap securely into place.
    4. Close the cartridge access door, and then close the control panel.
    5. If the 1203 message is still present on the operator panel, you need to insert one cartridge at a time to determine which cartridge is producing the failure.
    6. With one cartridge in the carrier, close the access door and control panel.
    7. Check the operator panel. If the 1203 error is displayed, this cartridge is the defective item.
      If the Cartridge Missing message is displayed, the second cartridge is producing the failure.
    8. Please replace the defective cartridge.

Mar 03, 2008 | Lexmark F4270 Plain Paper Inkjet Fax

1 Answer

"printer error - check paper" after cartridge replacement


First remove all paper from fax machine and unplug fax machine from the wall socket for 12 seconds then replug fax machine into wall socket replace paper and try printing

Oct 03, 2007 | Sharp UX B700 Plain Paper Inkjet Fax

1 Answer

Drum Life Warning Message


NOTE: Perform the following procedure to reset the Drum Cartridge counter after you replace the Drum Cartridge. Do not perform this procedure at any other time. From the Standby Mode, press the [Menu] (up arrow) button, then press [5], [2], [0], [4]. The screen will display: Change drum. Yes No Press [1], then press [Enter]. The screen will display: Completed. Press [Stop] to return to the Standby Mode. These directions were found on the Xerox website, and worked for me.

Dec 28, 2006 | Xerox WorkCentre Pro 575 Plain Paper Laser...

Not finding what you are looking for?
Ricoh FAX4700L Plain Paper Laser Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ricoh Fax Machines Experts

quennie732

Level 2 Expert

393 Answers

OfficeServiceAjnc
OfficeServiceAjnc

Level 2 Expert

181 Answers

CheckitRight
CheckitRight

Level 3 Expert

1352 Answers

Are you a Ricoh Fax Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...