Question about Lexmark Printers & Copiers

5 Answers

My Lexmark 4300 printer will not work with my new Lap-top using windows vista.I inserted the disc that I had with my previous computer (PN 22DO260)but no response.

Posted by on

  • kimus Aug 23, 2008

    I still cannot get the printer to work. It appears that the driver will not download.

×

5 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,940 Answers

Kimus

cjr4300EN.exe is the file to download from here: http://downloads.lexmark.com/perl/downloads/downloads.cgi?ccs=229:1:0:479:0:0

When you select that file and click the download link, you'll get a notification bar at the top of your browser, you need to Click that bar and allow the download, then you'll be prompted for the location to to save the file. Once saved to your download folder, you'll get a 2nd pop-up and you tell the file to RUN. During the SW install, you'll be prompted at the correct time to plug in the USB cable for the printer and turn the printer on, then the driver install should complete.

Posted on Aug 23, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,614 Answers

Download the printer model driver on this SITE HERE.

THANK YOU

Posted on Aug 21, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 928 Answers

This is because your printer CD does not have the drivers for Vista You can check the link below for the driver for your printer.

http://www.lexmark.com/lexmark/sequentialem/home/0,6959,204816596_1019285789_0_en,00.html

Hope this solves your concern!
Have a nice day!!!

Posted on Aug 21, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 848 Answers

Try to download the driver from the lexmark website for vista ........

Posted on Aug 21, 2008

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,847 Answers

Have you installed the printer drivers?

Posted on Aug 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Just got new computer with VIsta


first run the cd which came along with the printer then restart the system connecting the printer if still you face problem then please check if your system's usb port is working fine or no. if your usb port is working fine then i suggest call the person from whom you bought this printer

Jun 09, 2009 | Lexmark P4350 All-In-One InkJet Printer

1 Answer

I have a lexmark 4300,i ran the cd that came with it,but it just would not complete the installation of the software? MY LEXMARK 4350 WAS WORKING BEFORE WITH VISTA.. AND I HAD TO REBOOT MY WHOLE COMPUTER...


If you are still using Vista, the 4350 CD probably does not contain the Vista driver. You can uninstall the previous driver and install the latest Vista driver from:
http://downloads.lexmark.com:80/perl/downloads/downloads.cgi?ccs=229:1:0:479:0:0

Choose the appropriate driver, 32bit or 64bit.

May 31, 2009 | Lexmark P4350 All-In-One InkJet Printer

1 Answer

Unable to load Lexmark z615 printer to my new Dell 1535-windows vista lap top


Yes, there is a Vista driver available. Go to www.lexmark.com and click on DRIVERS AND DOWNLOADS. Then use the DRIVER FINDER. In SEARCH BY MODEL, type in z615 and you can choose a driver from there.

Steve

Sep 11, 2008 | Lexmark Z600 InkJet Printer

1 Answer

My printer lexmark X1150


You can download the software from their support website.
  • Click the link below
  • From the web page, click on the operating system installed on your computer (i.e. Windows XP, Vista, etc)
  • Download and install the software.
http://downloads.lexmark.com/cgi-perl/downloads.cgi?lxkprod=Lexmark+X1150

Hope this helps! : )

May 08, 2008 | Lexmark X1150 All-In-One InkJet Printer

4 Answers

Lexmark won't work with vista


Yes works with Vista but you will need to use Vista driver not XP

Rate this solution then Download here

Delete old install before reinstalling!!!!

Release Notes Attention: To prevent issues during the installation, please uninstall all previous versions of this driver prior to installing this web package. File Information File Name: cjr1200EN.exe null.gif Version: 1.0.11.3 null.gif Released On: MAR 05 2007 00:00:00 null.gif File Size: 42452912 KB null.gif Products: Lexmark X1240, Lexmark X1250, Lexmark X1270, Lexmark X1280, Lexmark X1290 null.gif Languages: null.gif Operating Systems: Windows Vista null.gif Application: n/a null.gif Owner Name: Lexmark null.gif Data Stream: Lexmark Host Based Solution, Lexmark Scan and Copy Control null.gif Security: null.gif Install Instructions:

Dec 25, 2007 | Lexmark JetPrinter X1185 All-In-One InkJet

7 Answers

Lexmark 4300 series uploaded onto vista?


Lexmark all in one solution software you used in XP doesn't work with Vista.

But you can still scan and copy by using Windows Photo Gallery.

1. Click on files tab at the top in Window Photo Gallery.
2. Click on import from camera or scanner.
3. Highlight your scanner icon (ie lexmark 4300) then click import.
4. "New scan" window will popup, now you can preview or scan using this basic looking Vista tool.

Hope it helps.
I miss my Lexmark all in one solution scanning software too.

Dec 10, 2007 | Lexmark P4350 All-In-One InkJet Printer

2 Answers

My printer is not working with my new computer


No Vista Drivers Two thing to try. 1. Go to the Lexmark site and seek out Vista drivers for your model. 2.Go to start/printers and Faxes/install new printer. When you are given the choice CD or from list select 'From List' Go to make - Lexmark Go to Model 4300[or any 4000 series if you do not see 4300] Click OK Tell us what happens Finally be preparde to sport out on a new printer that is Vista Compatable

Sep 21, 2007 | Printers & Copiers

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...