- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The built in CD is just a player not a recorder and the unit does not have line level outputs to run to an external CD recorder so the answer is unfortunately "no". You could use the high level speaker outputs and "pad" down the outputs to line level using a pair of potentiometers, one for each the left and right channels, if you have any electronic wiring knowledge.
check to make sure the tab on the cassette is not on, as if it is, it will prevent the record button from being pushed down , thus avoiding overwriting the cassette.
If thats not the case then the record mechanism is damaged inside the cassette caddy.
You can only record from the radio or CD player. There's no microphone input on this model. Just insert a tape and press the REC button. If you're recording from the CD, it begins playing when you press the REC button. If you need a copy of the manual you can download it here.
you mean to record?first,you must connect the other unit (if you are using two cassette)by using rca plug or earphone plugs.insert the plugs to audio in or aux(this is the unit that will record).if the other unit doesn't have the output audio,use the earphone out instead.time to record.the recorder must be set to tape/aux,(if you are using a unit with radio setting).then,push the play and record button at the same time.don't forget to put in the blank tape ok.then push play to the unit that you want to be recorded.the square symbol is for stop.the arrows pointing left ,rewind.pointing right, forward.the big arrow pointing right is the play and the button next to it is the record button.
Almost always, the reason for the 'Record' button will not "push down" is because the record tab of the the cassette has been removed. There are 2 of these tabs on both ends of the rear of the cassette tape. If they have been broken off, there would be 2 square holes. A workaround is to cover these holes with tape. Of course it is also possible that the metal tab pressing on these tabs are out of alignment (least likely).
I have not "solved" the problem. I'm simply assuming that the built-in microphone does not work. I CAN record radio on to a tape and a CD onto a tape. I just cannot record my voice onto a tape. I'm just chalking it up to a faulty microphone.