Question about Office Equipment & Supplies

2 Answers

My Medion Flatbed Scanner MD90093 will not stay on the Computer,I get it connected but within a minute it reads Scanner is not ready,can You help Werner

Posted by on

  • Anonymous Sep 25, 2008

    computer will not connect scanner

  • lidiandrzej Nov 17, 2008

    I can scan photos, when I attach an adaptor foe slides it does not want to scan the slides. Any suggestions?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi guys, can someone upload drivers so i can download them, i lost mine :/

Posted on Dec 31, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Epson stylus DX4450, and the scanner doesn't read anymore. Is it possible to reset it?


Try disconnecting the power supply from the electrical outlet and the usb connection to the computer for 10 full minutes and then reconnect both. This usually works.

Feb 08, 2012 | Epson Stylus DX4450 All-In-One InkJet...

1 Answer

Scanner will not scan


Problems you may have while using the scanner often involve the operation of your software and computer. Operation problems usually occur because of:

Incorrect setup of the interface
Incorrect setup of your computer or software
Incorrect operation of your software
See your Start Here poster to confirm that you have set up the scanner in the correct way. Also, see the documentation that came with your computer and software for possible solutions
IF The scanner does not scan.

Try one or more of these solutions:

Wait until the Start button light stays green (ready for scanning).
Your system may not work properly if you use a USB cable other than the one supplied by EPSON. Use the USB cable that came with your scanner.
The scanner may not work properly when connected to the computer through more than one hub. In this case, connect the scanner directly to the computer's USB port, or through one hub.
Pressing the button does not start scanning
Try one or more of these solutions:
For Windows XP users:
Click the Events tab in your scanner's Properties dialog box and make sure Take no action is not selected. Also, make sure the desired button is selected in the Select an event list box, and Start this program is selected.

Oct 20, 2010 | Kodak ESP 3 Multifunction Printer/ Copier/...

1 Answer

I lost the CD to install my mercury 2400CU flatbed scanner and my computer cant connect recognise it. What can I do?


hi

go to following link you will have your drivers for mercury scanner Drivers

http://www.topshareware.com/mercury-scanner-2400cu-driver/downloads/1.htm

Aug 30, 2010 | Office Equipment & Supplies

1 Answer

I AM ATTEMPTING TO USE THE SCANNER FUNCTION ON A CANON IR2230


Firstly, the machine must be connected to a pc or network. Secondly, you must scan the document to a pc so, after you have switched on, as you have, the scanner so that it says 'online' you will need to go to the pc and 'PULL' the document to the pc from the scanner. However, to do this you will need to have installed NETWORK SCAN GEAR on your PC inorder to SCAN. When you install the software, you will need to DISCOVER the scanner before it will be ready for use. So, a recap:

1. You NEED a program called NETWORK SCAN GEAR on your PC
2 Your ir2230 must be connected to a PC or network
3 You need to DISCOVER your ir2230 from your PC
4 You then need to INSERT picture FROM SCANNER and select your ir2230 from within a program such as WORD using NETWORK SCAN GEAR

Good luck

Jan 01, 2010 | Canon IMAGERUNNER 2230 Copier

2 Answers

Scanner won't communicate with computer


Try this,

Go to Control Panel >> Device Manager, look for the scanner in 'Device Manager' under 'Imaging Devices'
Right click on it and select 'Uninstall' and allow it to be uninstalled.
Remove the USB lead from the scanner.
Re-boot the Computer.
Once windows appears and is ready toi use, re-connect the scanner USB lead.
Windows should re-install the drivers and tell you the scanner is ready to use................hopefully!

Mar 25, 2009 | Canon CanoScan 4400f MultiFunction Color...

1 Answer

I have a medion flatbed scanner modelMD41260 OK ON XP but want to use on vistabut cannot find any updated software anyideas.


Finding drivers for vista is a pain, check manufacturer website, also plug it in and see if you can import from it, manufacturer website under support will be your best bet.

Dec 11, 2008 | Office Equipment & Supplies

1 Answer

I have a WorkCentre XK35c/25c that I now use just as a copier.(Not hooked up to computer) When turned on it has power but when you hit start it sounds like it is going to copy as the light bar goes across...


The scanner for the flatbed has failed to properly move. The rails may be dirty, or the motor may be binding. Additionally there is a home sensor switch that must be activated when the scanner is initialized. Finally, when the copy button is pressed, does the lamp on the scanner come on within a few seconds?

If not, the scanner lamp may have failed.


Zenbob

Jul 28, 2008 | Xerox Office Equipment & Supplies

1 Answer

How do I scan a bunch of originals from the tray and get 1 file for each page?


Loading originals to scan
Use these instructions to load originals into your device for scanning. For the best quality
scans, use the flatbed scanner. See Selecting media for the automatic document feeder
(ADF) for guidelines on choosing original documents for scanning.
Loading originals onto the flatbed scanner
1. Make sure that the automatic document feeder (ADF) input tray is free of media.
2. Lift the flatbed scanner lid.
3. Place the original document face-down on the flatbed scanner with the top, left corner of
the document at the lower-right corner of the glass.
4. Gently close the lid.
5. The document is ready to be scanned.
CAUTION To prevent damaging the device, do not allow the scanner lid to fall onto the flatbed scanner
surface. Always close the scanner lid when the device is not in use.
Loading originals into the automatic document feeder (ADF)
input tray
Note The ADF capacity is up to 50 sheets of 75 g/m2 (20 lb) media (depending on the thickness of
the media), or fewer sheets if the stack fills the ADF.
The minimum size for media in the ADF is 127 by 127 mm (5 by 5 inches). For smaller sizes
use the flatbed scanner. The maximum size for media in the ADF is 215.9 by 381 mm (8.5 by
15 inches).
1. Make sure that the flatbed scanner contains no media.
2. Close the flatbed scanner cover and put the top end of the stack of originals into the ADF
input tray, with the media stack face-up and the first page to be scanned on top of the
stack.
3. Slide the stack into the ADF input tray until it does not move any farther.
If this helps you, let the Boss, FixYa.com Know...

May 13, 2008 | HP LaserJet 3030 All-In-One Printer

2 Answers

HP LaserJet 2840 Scanner problem


Have you looked to see if there is any paper at all in the trays. That are getting hung up.?? I can help

Feb 10, 2008 | HP LaserJet 2840 Printer

1 Answer

Installing new Lexmark printer x 1240 to Medion pc


Hi......... In this case as u said you have already called Lexmark Tech Support what i would request you to do is go ahead and click on start go to all programmes go to Lexmark X1200 Series and click on Uninstall after uninstallation it will say to restart the Computer......................... After Restarting the computer click on the following link: http://downloads.lexmark.com/perl/downloads/downloads.cgi
Select your Operating System and Download the drivers from the website......... Install the downloaded drivers and the software........ Try this it will work........ Good Luck....

Oct 22, 2007 | Lexmark X1270 All-In-One InkJet Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

2,215 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

98879 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

64052 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...