Question about Humminbird 997c Si Combo Color Fish Finder And Gps Chartplotter, Without Transducer

1 Answer

I have a humminbird 937c fish finder gps and chart plotter but i need a manual to tell me how to use it

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Humminbird Master
  • 696 Answers

Hi!

No problem. Here's the link to your manual!

http://www.manualnguide.com/dl/15864/

Happy Boating!

Posted on Jun 20, 2011

  • Steve
    Steve Jun 20, 2011

    On second thought, stay clear of that link.
    THIS link is MUCH quicker. http://www.azmanual.com/download/15864/0...

    Hope this helps.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My fish finder shutsdown or restarts when I start my main motor


are they drawing power from the same bat? it maybe that starting the motor drop the voltage the finder receives

Apr 25, 2016 | Lowrance HDS 5 Fishfinder GPS Chart...

1 Answer

Where do I get a manual for lowrance elite 5 fish finder chart plotter gps


Just type this into your browser's searchbox. manualslib.com/manual/292954/Lowrance-Elite-5-Dsi.html
You should be able to pull up the manual there.I just did. Garcuda

Nov 23, 2014 | Lowrance Elite5x Color Fish Finder 102001

1 Answer

I get an error msg that the transducer is not connected. How can I check idf the transducer is faulty


If you can find someone with a Humminbird that has the same pin configuration on the transducer cable, switch yours out and put the transducer in a bucket of water to see if it works. Otherwise, make sure the cable at the plotter end is firmly placed in the socket, and that no pins got bent in the past. Some of these models came with a metal clip that holds the end of the cable(s) tight to the plotter and is held tight by the mounting bracket screws.

Aug 28, 2011 | Humminbird Matrix 97 Combo Fish Finder And...

2 Answers

Need to locate and print users manual for Humminbird Pironha Max 160 Fish finder


print users manual for Humminbird Pironha Max 160 Fish go to this link http://store.humminbird.com/media/document/PiranhaMAX_150-160-170-180-190c.pdf

Aug 13, 2011 | Humminbird GPS

2 Answers

Can i get a free manual for the matrix 97 combo fish finder / gps chartplotter.


Call our Customer Service Group at 800-633-1468 and they should be able to help you.


Joby
Humminbird

Feb 06, 2011 | Humminbird Matrix 97 Combo Fish Finder And...

1 Answer

Our new 787C2 fish finder by Humminbird is not working correctly. It worked for our first view fishing trips, but now the display is not showing any color, structure or fish. It tells us the depth and...


This could be a lot of things. The unit employs multiple signals to gather data and it could be the transponder not getting the signal or it could be something simple like the sensitivity. Humminbird 757c Operation Manual Sensitivity

Feb 19, 2018 | Humminbird Fishing System, 787c2 Combo...

1 Answer

Owners Manual


I've heard that Humminbird will be happy to send you a manual, just fill out the contact form supplied here:

http://www.humminbird.com/support/faq.aspx?ask=yes

Good luck!

Apr 29, 2010 | Bottom Line Fishin' Buddy 1101 GPS...

1 Answer

Furuno 1850 has water in unit, only noticed


http://www.fixya.com/support/r3771170-phone_water_damage

Nov 06, 2009 | Furuno 1850WF Gps Fish Finder Combo...

1 Answer

Rl70c raymarine depth finder problem


fish finder transducer needs to be on before you boot your system. check your hsb cables and termination

Jul 12, 2008 | Raymarine RL70CRC GPS Receiver

Not finding what you are looking for?

Open Questions:

0 Answers

My Humminbird 997c SI is stuck in loading screen I had downloaded latest software updates for my Humminbird 997c SI and my 1197c SI.Then was attempting to update them one ata a time following typical software updates for these units like I had done in the past, resetting factory settings then running software update. My 1197c SI update perfectly with no problem, then moved up front to perform update on my 997C SI and went through same process as mentioned before. I turned around for less than a minute and turned back around to a black screen. When attempting to turn the power back on it started the loading screen and then stayed there for over an hour. I brought the unit inside and connected to the PC via USB cable and opened my HumminbirdPC. I made it to the Matrix Boot screen by holding the "View" button down and proceeded to toggle down to the #9 "Program" command and again pressed "View" to start to HumminbirdPC recognition sequence. My unit is not recognized by the software and the unit came back with a "Programming Failure" response. I have attempted this several times and even brought the 119c Si in to try,keep in mind the 1197C Si is up to date... However thinking that the 1197C SI would load and be rcognized, now both units have the "Pragramming Failure" response when trying to get Humminbird PC to recognize them!? I have my PC with Windows Vistaup to date as I just went through a 26 item update with windows, including service pack 2. I have all Drivers up to date, all Security updates and still no recognition. I thought maybe it was something with my PC... So I borrow my wife's work computer which is a Dell with Wi ndows XP and her company keeps it updated thoroughly. Same result... Then borrowed my Sons MAC that runs Parallels and has Windows 2000 on it. No Luck!! I have exhausted all ideas and could use some additional ideas if someone has any. Any input would be appreciated to get the 997C SI up to date. I have heard tha it is appx $200 to send it in to Humminbird and the new 998c is outrageuosly expensive. Thank you in advance for any HELP!?

May 29, 2012 | Humminbird 997c Si Combo Color Fish Finder...

0 Answers

My Humminbird 997c SI is stuck in loading screen I had downloaded latest software updates for my Humminbird 997c SI and my 1197c SI.Then was attempting to update them one ata a time following typical software updates for these units like I had done in the past, resetting factory settings then running software update. My 1197c SI update perfectly with no problem, then moved up front to perform update on my 997C SI and went through same process as mentioned before. I turned around for less than a minute and turned back around to a black screen. When attempting to turn the power back on it started the loading screen and then stayed there for over an hour. I brought the unit inside and connected to the PC via USB cable and opened my HumminbirdPC. I made it to the Matrix Boot screen by holding the "View" button down and proceeded to toggle down to the #9 "Program" command and again pressed "View" to start to HumminbirdPC recognition sequence. My unit is not recognized by the software and the unit came back with a "Programming Failure" response. I have attempted this several times and even brought the 119c Si in to try,keep in mind the 1197C Si is up to date... However thinking that the 1197C SI would load and be rcognized, now both units have the "Pragramming Failure" response when trying to get Humminbird PC to recognize them!? I have my PC with Windows Vistaup to date as I just went through a 26 item update with windows, including service pack 2. I have all Drivers up to date, all Security updates and still no recognition. I thought maybe it was something with my PC... So I borrow my wife's work computer which is a Dell with Wi ndows XP and her company keeps it updated thoroughly. Same result... Then borrowed my Sons MAC that runs Parallels and has Windows 2000 on it. No Luck!! I have exhausted all ideas and could use some additional ideas if someone has any. Any input would be appreciated to get the 997C SI up to date. I have heard tha it is appx $200 to send it in to Humminbird and the new 998c is outrageuosly expensive. Thank you in advance for any HELP!?

May 29, 2012 | Humminbird 997c Si Combo Color Fish Finder...

Humminbird 997c Si Combo Color Fish Finder And Gps Chartplotter, Without Transducer Logo

232 people viewed this question

Ask a Question

Usually answered in minutes!

Top Humminbird Boating Experts

fordexpert

Level 3 Expert

5692 Answers

Bill Eager

Level 3 Expert

459 Answers

Mike

Level 3 Expert

4357 Answers

Are you a Humminbird Boating Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...