Question about Maytag Neptune Washer

3 Answers

My washer Maytag Neptune Model MAH3000AWW not working. After push the START button, the "ON" led just light up 3-5 sec then turn off

Posted by on

  • paul_rod Oct 19, 2008

    has anyone found a resolution to this? We are having the same issue and have called Maytag / seached web/ still have not found anything.
    If anyone has a fix please email me....paul_rodrigues@msn.com. I will buy you dinner!!!

    Thankx



  • Sam09 Jan 14, 2009

    I have the same problem ... shuts off about 2-3 seconds after the Start button is released. Im assuminh the relay on the control board is stuck. Please email me if you know the solution: siamakki@hotmail.com

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My washer Maytag Neptune Model MAH3000AWW not working. After push the START button, the led just light up 3-5 sec then turn off

Posted on Sep 07, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi, We had the same problem. Start the machine, the door locks and it shuts off. We were told our motherboard was shot and we had to get a new one for a thousand dollars and pay the repair man $70.00 to install it. We ended up paying a guy in Surrey $300.00 to repair the mother board and haven't had a problem since. Machine works great and it's about 7 years old. The guys email is wires@telus.net and he says if he can't fix it, there is no charge:) His name is Tim and he's amazing. Cheers Dan

Posted on Jul 27, 2012

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

I don't remember the solution, becuase it wasn't the shut off problem I am having (mine shuts off after 5 minutes) but google search of "maytag neptune shuts off" or somesuch should find you the solution.

Posted on Oct 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Maytag washer wiring diagram


machine start when you push the start button but stops 3 or 4 seconds after the button is released help me dennis montgomery maytag neptune model #mah3000aww

Aug 27, 2010 | Maytag MAH8700AWM Neptune Front Load...

1 Answer

The lights go on, but washer will not start.


door not closed try open door and then closing again

Feb 11, 2010 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Neptune MAH3000AWW washer will not drain


First and foremost unplug the unit
remove back panel
remove hoses from pump (expect water have towels handy)
open pump by removing screws
remove foreign objects if any
check impeller blades to ensure that they arent worn down
rebuild and reinstall pump
or replace pump reconnect hoses, replace rear panel
you should be good to go

Sep 10, 2009 | Maytag Neptune Washer

1 Answer

Maytag neptune mah3000aww spin problem


there are 2 wires going back to the board. They connect to a blue harness. Make sure their is continuity thru the harness. It connects to 3 out of balance swithches. Also check to see if lock light comes on.

Jul 07, 2009 | Maytag Neptune Washer

1 Answer

I have a mah5500b. prob is washer will not start or do anything. it just beeps. tried the diagnostic test. by pressing delicates and heavy soil. led shows 00. when i push other buttons to check functions....


I had a similar problem on my Neptune. All the machine would do is beep. I believed it was a stuck button so I got a new touch pad and that solved the problem. I also substituted a control board prior to buying the touch pad but the problem was the same.

May 13, 2009 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Washer runs when timer dial turned though ON button not pushed


Problem solved by ourselves! It was NOT in the circuit board (brain) of the machine. It was NOT in the door locking assembly as others would lead us to believe. It WAS the on/off switch on the control panel--part number 22002560 - a $22.00 problem fix.

Jan 05, 2009 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Maytag neptune washer MAH3000AWW


order the wax motor kit and replace parts from the internet. there are plenty of videos how to do this. it does require minor soldering and a little mechanical aptittude.

Dec 30, 2008 | Maytag Neptune Washer

Not finding what you are looking for?
Washing Machines Logo

980 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Al Clark

Level 2 Expert

290 Answers

Todd Marr
Todd Marr

Level 2 Expert

77 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...