What is the meaning of sc 101 and sc 350 .....how can i fix it.....
SC350 ID sensor pattern test error
Your scanner should be checked by a technician to determine what is causing the error. There isn't any calibration or troubleshooting that can be done unless you have scanner parts.
Error code SC-101 for Ricoh Aficio 350
- exposure lamp defective
- camera
- scanner board
Error code SC-350_01 for Ricoh Aficio 350
- clean the sensor above the drum unit
- clean the drum unit
SC101 Scan Lamp Error
SC350 ID sensor pattern test error
Your scanner should be checked by a technician to determine what is causing the error. There isn't any calibration or troubleshooting that can be done unless you have scanner parts.
Check on copytechnet.com. They should have a link for Ricoh error codes...
There is a link on there for that as well.
I asked that a few times and you need to have the firmware on pcmcia cards to do it.
It's not going to help with the performance of the copier by doing it. It isn't recommended by Ricoh.
I'll have to check that one out.
×
1. HDD connector is disconnected.
2. SC connector is disconnected.
3. HDD is defective.
4. SC PCB is defective.
Hi
Error code sc 547 means "Zero cross signal malfunction". This error appears due to a faulty power supply. This error code may also appear if the input board is defective or the BIC Unit is defective. Turn off the printer and unplug the printer for 30-40 minutes and check if the error still appears. If you see he error still appearing then try and rest it using the following reset method--
To reset the SC code by entering SP5810 and select 1.
Now hold down the photo mode key and the # key at the same time for at least 3 second.
Then turn the machine off and on again.
If the same issue still appears, you'll need to check and replace the Power supply or the Input (IOCC) boardt.
Hope it helps...
2,875 views
Usually answered in minutes!
tenkz... wer can i download the sc code meaning so dat everytime i encountered service code i can easily detect and repair the problem....if i can.... tenk a lot
tenk but i cant find it in copytechnet ....
tenkz a lot bubbabear ...it will help me a lot in my machine trouble.....how about the procedure hw to repair afficio 450 is der any link about it.... plz..... cuz i want to learn how to fix my own copier...
bubbabear if il format the hard disk of my afficio 450 wat will hapen... i want to format it so dat i will have a new fresh program.... hw wil i do it...??? can u help... tenkz
wat will be da best setting .... to avoid overtone in my afficio 450 i change the toner supply rate 20 and toner suppl correct. 2.0...TD sensor manual set Vts 4.37
oki....tenkz a lot ...tenkz in advance....
oki....tenkz a lot ...tenkz in advance....
×