Question about Projection Televisions

1 Answer

Screen is blue - Projection Televisions

Posted by on

  • O_fraile Aug 21, 2008

    Hi
    Thank you for that. But I don't think it solved it. It's not that the screen goes blue all around. You can see the channel and everything it is just that its color is blue.

    Please help. Thank you very much.


×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 927 Answers

Good Day, o_fraile;
Blue screen normally means your TV is not receiving a signal.
1. Reset TV by unplugging TV's A/C cord from source for 3 to 5 minutes...... plug back in
2. Do the same to "BOX" ( cable, sat & etc)
3. Make sure input is the correct, all inputs, turn DVD and others on and go through inputs.
Good Luck, big IRISH.

Posted on Aug 21, 2008

  • MICHAEL MULLINS Aug 21, 2008

    GOOD NIGHT, o_fraile;

    SO, THIS DID'NT HELP! Since you gave ALL this information like the Brand and Model number and you want precise help. BUT know you don't have a blue screen but a blue picture?

    Try this; turn your G-2 Blue screen control down, after turning down the color in customer menu, and adjust for proper B & W tracking. Good Luck, big IRISH.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have Sony Model# KP-57HW40 Big screen rear projection tv..Has blue wavy lines across screen, and sometimes flashes blue, can you give me assistance??


Blue Picture Tube , bad Video IC on Blue CRT board.Or Blue screen drive control to tube needs to be adjusted down some.

Most Likely Bad Tube!

Jul 12, 2010 | Sony KP-57HW40 57" Rear Projection...

1 Answer

MITSUBISHI WS55809 Blue Screen


I'm not clear on this. When does it show a blue screen? When you have it in HDTV mode? A Blue Screen means it's not getting a signal (or the signal is very weak, resulting in more static than picture). If it is a blue screen for HDTV, how are you sure the HDTV receiver is working? If you can answer those questions for me, I should be able to track down the problem. I'm not sure which direction to go yet.

Sep 02, 2007 | Mitsubishi WS-55809 55" Rear Projection...

1 Answer

Blue dots on screen. Blue band on on/off side of screen.


blue dots on screen,bright blue haze right corner to north westpast center of screen.

May 24, 2010 | Sony Grand WEGA KDF-60XS955 60" Rear...

1 Answer

BLUE SPOTS ON SCREEN


The Blue Screen of Death (also known as a stop error, BSoD, bluescreen, or Blue Screen of Doom) is a colloquialism used for the error screen displayed by some operating systems, most notably Microsoft Windows, after encountering a critical system error that can cause the system to shut down to prevent irreversible damage to the system's integrity.
You can visit here How to fix blue screen

Feb 20, 2010 | Sony Grand WEGA KDF-60XS955 60" Rear...

1 Answer

The lower left hand corner of the screen is turning blue


catually is problum is related with blue lcd & blue polizer but first you clean the optical unit if the problum gon then ok other wise must chang blue lcd & blue polorize with uv filter plese contect to your nearst sony service centre

Feb 05, 2010 | Sony Grand WEGA KDF-60WF655 60" Rear...

3 Answers

Screen turns blue


You may have a bad blue picture tube but there is a way to deal with this first---This is a 2001 model and does not have a light engine---I did one of these with the same problem a week ago---the set has a black plastic block with six controls---three are Focus(red,green,blue) the other 3 controls are Screen controls(red, green, blue) Someone has to remove the entire piece on the front of the set below the screen(usually a plastic part) most of the time it is secured with 3 screws on either side of the set in the back; once you remove the screws the entire piece should pull out(pull from right to left(it will not fall off or come out easy--it is held in with several large plastic pegs) With it removed there is an inspection plate with 4 screws-----the screen/focus block is behind it.

You need to look very closely at the block to identify the focus versus screen controls----one row left to right will be marked Focus and the other row left to right will be marked screen------YOU need to locate the Blue Screen control(they are black like the block) With the set on(be careful) go to a video input with nothing connected---if you see a blue screen as well as the input number turn the BLUE SCREEN CONTROL SLOWLY TO THE LEFT UNTIL THE BLUE is gone.

If this cures the problem you may only be buying yourself some time----if the blue picture tube is bad sooner or later this trouble may return----I have seen sets where this was adjusted and the set worked for a year or more with no repeat of the trouble----replacing the blue tube would likely cost you 400 - 500 parts and labor.

I do this here for free so if this has helped you take a moment and give me a vote here.

SD TECH

Sep 03, 2009 | Sony Grand WEGA KDP-57XBR2 57" Rear...

1 Answer

TV screen Flashes blue and then shuts off.


When it flashes blue, are the flashes bright blue lines going across the screen with the picture in the background, if so, It sounds like the Blue tube or blue driver circuit is breaking down after a short period of time. If this is the case, the uPC that controls the set is detecting a large current drain on and is shutting the set off for protection, An engineers expert eye is required I`m afraid. Ian.

Jul 24, 2009 | Sony KP-65WS500 65" Rear Projection...

1 Answer

The screen is all bright blue


I have Model # KP-WS500. The screen turn blue.

May 02, 2009 | Sony KP-57HW40 57" Rear Projection...

1 Answer

Horizontal blue lines with a slight blue wash in the screen


Hi,
Its because of Over Voltage of Screen (G2) to Blue CRT.
Take off front lower cover (speaker grill) and unscrew board. There you will need to find Focus Block mounted having 6 control knobs. 3 knobs are for Focus control and 3 are for Screen volts control. Find Blue Screen control knob and turn is Counter Click Wise slightly until bluish shade disappear on screen including few blue horizontal lines.
If you select AV input to adjust that will be fine as you do not need to wait for dark-scene.

Apr 09, 2009 | Sony KP-65WS500 65" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...