Question about PC Desktops

1 Answer

Not able to connect my x box live and computer to split internet axess the lady at xbox live gave me new port udp #'s but I don't know how to set that up. the router is a zonet 1134we

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 197 Answers

I have sent in a question to the zonet company, i m trying to resolve your problem

thanks

Posted on Aug 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have wirerless internet and my xbox wont connect why


Here is xbox support:

http://support.xbox.com/en-us/pages/xbox-live/how-to/default.aspx

For Linksys routers:

Hooking up an Xbox with Linksys routers:


Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
Leave username blank & in password use admin in lower case...

Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...

1) On the first line in Application box type in ABC, in the start box type in 88 and End box type in 88, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...

2) On the second line in Application box type in PQR, in the start box type in 3074 and End box type in 3074, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...

3) On the third line in Application box type in XYZ, in the start box type in 53 and End box type in 53, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box and click on Save Settings...

3) Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...

4) Click on set-up and change the MTU Size to 1452 and click Save Settings...

5) Goto the XBox Network Settings and IP Address Settings and select manual IP Settings and assign the following on your Xbox

IP Address :- 192.168.1.20, Subnet Mask :- 255.255.255.0, Default Gateway :- 192.168.1.1...

6) Also assign the DNS Addresses on the Xbox

Primary dns :- 4.2.2.2...Secondary dns :- 192.168.1.1

7) Turn off your modem, router, and Xbox...Wait for a minute...

8) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the Xbox and test it...it will connect...

Dec 02, 2010 | PC Desktops

Tip

Windows File Sharing And The Dangers Of NetBIOS


NetBIOS is a Windows File and Print Sharing protocol, and it uses TCP/UDP ports 135, 137,138, and 139.

* TCP/135 - RPC: This port is potentially quite dangerous. Remote Procedure Calls are requests from one machine to another for service. The RPC service acts as something of a facilitator, or go-between, between the client making the request and the machine being asked for service, i.e. a request is made to this "end-point mapper service" and then a port is allocated dynamically to the service being requested. This is similar to the RPC functionality found in the Unix world, and although it's not technically a "file sharing" port, it ties heavily into Windows networking in general.

* UDP/137 - NetBIOS Name Service: This port is used to attain name resolution for NetBIOS. Think of it as NetBIOS's version of DNS or ARP. It's simply a way to use something you have, make a query, and get something you want in return. For NetBIOS it's from a NetBIOS name to an IP, for DNS it's a DNS name to IP, and for ARP it's from IP to hardware address.

* UDP/138 - NetBIOS Datagram Service: This port primarily allows the SMB browser service to populate the browse lists seen when using "Network Neighborhood".

* TCP/139 - NetBIOS Session Service: This is perhaps the most known Windows port of all, as it is used to transfer files over TCP. This is both the port that NULL Sessions are established over and the port that file and printer sharing takes place on. If you are considering restricting access to ports on your Windows machine, this one needs to be on the top of the list.

NOTE: By disabling NetBIOS, all existing file shares must be shared using the IP address, rather than the NetBIOS Name, or else the share won't work.


How to disable NetBIOS in Windows 2000:

  1. open Windows Explorer
  2. Right click on My Network places and select properties
  3. Click Internet protocol TCP/IP and select properties
  4. Click on Advanced and then WINS
  5. Select Disable NetBIOS over TCP/IP and click ok
  6. Restart your computer
  7. If Windows displays "This connection has an empty ... " message, ignore it and click ok
How to disable NetBIOS in Windows 95/98/ME
  1. open Windows Explorer
  2. Right click on My Network places and select properties
  3. Select Internet protocol TCP/IP and click Properties
  4. In NetBIOS, clear "NetBIOS over TCP/IP" check box and click OK.
How to disable NetBIOS in Windows Vista/7
  1. Click Start, and then click Network. (Or you can click Start, type ncpa.cpl into the search box, and press ENTER).
  2. Click on the Network and Sharing Center, and then click Manage Network Connections.
  3. Right click on the Local Area Connection or the connection you are using, and then select Properties.
  4. Select the Internet Protocol version 4 (TCP/IPv4)
  5. Click the Advanced button under the General tab.
  6. Click the WINS tab.
  7. Click the Disable NetBIOS Over TCP/IP button.
  8. Click Ok.
  9. Restart your computer.

on Jan 17, 2011 | PC Desktops

Tip

Crap Software Config Settings, How to set-up the firewall...


Configuring **** Software Pro
--------------------------------------
Configuring the Standard Settings

Your first configuration should be this of **** Software should be like this ----

Launch **** Software Pro and click to highlight the "Overview" tab on the left hand side. In the pane that appears on the right hand side click the "Preferences" tab and in the section "check for updates" check "Manually".

In the "General" section you can also configure **** Software to load at start up which is advisable because this software is you first line defense against uninvited invasion of you computer by a whole gamult of virii, spyware, adware and bots! Virus checking software does have its place but remember that prevention is always better than a cure!

**** Software Pro's program control is automatically configured. When you run it for the first time it will ask on behalf of programs installed on your system for permission to access the Internet. You Browser will be the first to request - just tick the "Yes" box and the "Remember this setting" box and **** Software will always allow you browser access automatically.

Unless you use online databases etc., there should be no reason for any application other than a browser, email client, ftp client, streaming media player or a download manager to gain access to the Internet.

So consider what type of program it is that need Internet access before giving **** Software permission to allow it. If it is just a driver file (.DLL that request Internet Access, always search Windows to try and identify it. Many seudo-virii such as Adware and sub class seven Trojans access the Internet from your system using .dll files.
--------------------------------------
Configuring the Advanced Settings

If you are not on a LAN (connected to another computer in a network) you can use this guide to give your firewall some real muscle:

Launch **** Software Pro and click to highlight the "Firewall" tab on the left hand side. In the pane that appears on the right hand side in the section "Internet Zone Security" set the slider control to "High" then click the "Custom" button in the same section. The next settins page is divided into two section with tabs Internet Zone and Trusted Zone at the top of the page.

Under the Internet Zone tab there is a list of settings that can be accessed by scrolling.

At the top is the high security settings and the only thing that should check from there is "allow broadcast/multicast".
The rest should be unchecked.

Scroll down until you get to the medium security settings area. Check all the boxes in this section until you get to 'Block Incomming UDP Ports". When you check that you will be asked to supply a list of ports, and in the field at the bottom of the page enter 1-65535.

Then go back to the list and check the box a longside 'Blockl Outgoing UDP Ports" and at the bottom of the page enter 1-19, 22-79, 82-7999, 8082-65535.

Repeat this procedure for the following settings
"Block Incoming TCP Ports": 1-65535
"Block Outgoming TCP Ports": 1-19, 22-79, 82-7999, 8082-65535
Then click "Apply", "ok" at the bottom of the page.

Back in the right hand "Firewall" pane go next to the yellow "trusted Zone Security" section and set it to "high" with the slider. Click "Custom" and repeat the ABOVE procedure this time choosing the "Trusted Zone" tab at the top of the settings page.

These settings will stop all incoming packects at ports 1-65535 and also block all pings, trojans etc. These settings will also stop all spyware or applications from phoning home from your drive without your knowledge!

Good luck!

on Jan 25, 2010 | PC Desktops

1 Answer

How to connect Ethernet cable through the pc to the Microsoft Xbox 360 elite Game console for Xbox Live, without buying a separate router ?


You will need a cat5 or cross over cable, plug it into the pc and xbox, if you use vista then it is quite easy, goto the startbar and goto connections, you should now have at least 3 connections.
your connection to the xbox and if you have wireless your wirless connection or wired connection to the internet and a connection with just numbers 14... or somthing like that. Note that xp does not allow wireless and wired connections to be bridged, i dont know if they have changed this through updates, but last time i did this it would not let me. I cant remember the program that does allow you to do this on xp, but as i can remember it is quite hard to do.

You will need to bridge 2 connections, your xbox connection and you internet connection, to do this left click on one of the connections just to highlight it, press control(ctrl) key and hold down, click to highlight the other connection, you should now have 2 connections highlighted, now right click on 1 of them, in the drop down menu you will see a tab saying bridge connections, click on that and it does the rest. After it has finished bridging the connection you should have a new icon in the network connections window, it looks like a bridge. You may need to restart your computer to make the settings take effect.

Now try to connect to live on the xbox, you should be able to connect straight through the computer to internet connection, and also if using vista access your media.

You may have a problem with your NAT type after doing this. Usually it says you have a strict NAT type, you will need to forward ports on your router to enable you to connect properly, do a google search for which ports you need to open in order to remove the strict NAT, you also search on how to forward ports using google, all the information should be there. hope this helps. Post back if you need further assistants.

Oct 02, 2010 | PC Desktops

1 Answer

How do i set up an x box 360 live to the internet


first you need a high speed connection then a router then you have to sign up for xbox live connect the wires then fill the info out for xbox live in the menu in the xboxthen there you go

Dec 07, 2008 | PC Desktops

Tip

Configuring ZoneAlarm Pro Security Settings, A ZoneAlarm Pro Toturial


If you're running zoneAlarm Pro you will probably have considered that most of the "advanced" setting might as well be in Chinese for all the use they are. User friendly they are not!

If you are not on a LAN ( connected to another computer in a network) you can use this guide to give your firewall some real muscle and a new lease of life:

Launch zoneAlarm Pro and click to highlight the "Firewall" tab on the left hand side. In the section " Internet zone security" set the slider control to "High" then click the "custom" button in the same section.

The next settings page is divided into two sections with tabs Internet zone and Trusted zone at the top of the page. Under the Internet zone tab there is a list of settings that can be accessed by scrolling. At the top is the high security settings and the only thing that should check from there is "allow broadcast/multicast". The rest should be unchecked.

Scroll down until you get to the medium security settings area. Check all the boxes in this section until you get to "Block Incoming UDP Ports". When you check that you will ve asked to supply a list of ports, and ion the field at the bottom of the page enter 1-65535

Then go back to the list and check the box alongside "Block outgoing UD Ports" and at the bottom of the page enter 1-19, 22-79, 82-7999, 8082-65535

Repeat this procedure for tha following settings
"Block Incoming TCP Ports": 1-65535
"Block outgoing TCP Ports": 1-19, 22-79, 82-7999. 8082-65535
Then click "Apply", at the bottom of the page.

on Jan 15, 2010 | PC Desktops

1 Answer

I am trying to set up xbox live for my son but when i try to go live on the xbox dashboard it says that wireless network not connected but i have a wireless network running in my house and need to know how...


  1. Connect the appropriate wireless network adapter to the console. On the Xbox, a Wi-Fi adapter that connects to the Ethernet port (sometimes also called a wireless network bridge) must be used. Alternatively, the Xbox 360 is also designed to work with certain Wi-Fi game adapters that connect to a USB port.

  2. Turn on the console and navigate to the wireless settings screen. On the Xbox, the menu path is "Settings -> Network Settings -> Advanced -> Wireless -> Settings" On the Xbox 360, the menu path is "System -> Network Settings -> Edit Settings."

  3. Set the SSID (network name) on the Xbox to match that of the wireless router. If your wireless router has enabled SSID broadcast, the SSID name should appear pre-selected on the Xbox display. Otherwise, select the "Specify Unlisted Network" option and enter the SSID there.

  4. Specify "Infrastructure" as the Network Mode. (Infrastructure is the mode used by wireless routers.)

  5. Set the Security Type to match that of the wireless router. If your router uses WPA encryption and the type of adapter connected to the Xbox does not support WPA, you will need to change your router settings to use WEP encryption instead. Note that the standard Microsoft Xbox 360 Wireless Network Adapter supports WPA while the standard Microsoft Xbox Wireless Adapter (MN-740) only supports WEP.
  6. Save your settings and verify the network is functional.

    On the Xbox, the Wireless Status screen displays whether a connection has successfully been made with the wireless router, and the Connect Status screen displays whether a connection has successfully been made through the Internet to Xbox Live.

    On the Xbox 360, use the "Test Xbox Live Connection" option instead.
Tips:
  1. Even when your wireless connection between the Xbox and the router is working perfectly, you may still experience difficulty connecting to Xbox Live. These issues can be caused by the quality of your Internet connection or the firewall and Network Address Translation (NAT) settings of your wireless router. Additional troubleshooting may be required in these areas to achieve reliable Xbox Live connections.
What You Need:
  • Active Xbox Live subscription (to access services)


Source: About.com

Sep 29, 2008 | PC Desktops

1 Answer

I am adding a new deskstop to my house, so a friend gave me his belkin router. i have been trying to set it up, but the problem is i have qwest choice internet and my modem is in my cable box in my master...


Wat u do is to just Connect ur Telephone wire to modem as usual and the output of modem has to be given to WAN port of ur router. your router must have atleast 2,3 LAN ports, take output from those ports and connect it to ur both desktop pc's...

Sep 05, 2008 | Belkin PC Desktops

1 Answer

Cannot get internet connection on my computer. Is this router compatiable with xbox live?


I do not know what Router you are talking about since you did not specify, but most routers are compatible with the wireless and ethernet function that the Xbox supplies.
Also, (and I have had this problem recently) having no internet connection on your desktop should not be affected if you are using the router to connect the Xbox, but if you are sharing the internet connection the wireless network will not function properly and shut down.
(It won't find a server)

Jul 02, 2008 | PC Desktops

1 Answer

I am a new Home Max customer and I have followed the instructions to connect my Live box to my PC. My laptop is working nicely wirelessly but my PC is not. The problem is that Internet Explorer keeps...


Reinstall the Internet Explorer, that will help.
U can reinstall Internet Explorer by clicking on start, control panel, add/remove programs, add/remove windows components, remove a checkmark next to Internet Explorer.
Then restart the computer.
Again go to start, control panel, add/remove programs, add/remove windows components, put a checkmark next to Internet Explorer.
Then apply, ok and again restart the computer.
Try to connect to internet and then check.
It will not close again.
Its possible that something might have been downloaded accidently and that is interfering with the internet.
It should work.
Otherwise, go to start, run, msconfig, startup, disable all, apply, ok and he restart the computer.
It will block some programs that may interfere with ur Wireless Internet Access.
It will work.

May 22, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...