Question about ViewSonic VX900 19" LCD Monitor

2 Answers

Vx710 My screen is blinking off. It shows a picture for about one second and goes black. This is constant.

Posted by on

  • Anonymous Jan 16, 2009

    nwfkeljvgalglkjalj nalkf alkfn lkfnsl knlkf nsdf

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The power supply is shot, sadly, and you'll need to replace it. It's inside the cover and you should be able to find one on eBay. I have one, which is doing the same thing. It's not the connection, drivers or updates. Not the Hertz (refresh rate) or Resolution either. Hertz too high will give an "Out of Sync/Range" (either/or) box in the middle. Same place you'd see "No Signal" if the cable was disconnected.

Posted on Oct 22, 2008

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 31 Answers

I would suggest checking your connections, Video drivers, and also for any updates made specially for your operating system. Try an auto adjust, and also check your hertz rate and refresh rates on both the monitor itself and in the computer video settings.

Posted on Aug 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The picture on my monitor works for a half of a second when I first turn it on, then it fades to black. What can I do to fix this?


If you can see your desktop faintly in the background, this means that the CFL lighting tubes have stopped working and would need to be replaced. However try to increase the brightness using the buttons on the monitor.

Rate me high.

Nov 01, 2010 | ViewSonic VX710 17" Flat Panel LCD Monitor

1 Answer

Viewsonic VX710 Monitor scrren goes black


replace all caps on power supply board check values
should not cost more than 20 us. and 1 hour soldering
easy fix but new monitor goes around 100 us.
can you do it???

May 10, 2010 | ViewSonic VX910 19" LCD Monitor

1 Answer

Viewsonic VX710 17" Flat Panel Display. It turns on and after 1 or 2 Seconds shuts the backlight off L.E.D. satys on but the backlight won't comeback on. No cap seems to be blown up.


Failed cap amy not show any sign of bulging or leaking, it can still have high ESR. You can also have components failure in the inverter circuits such as shorted inverter transformer driver transistors, open or short winding (DC Ohm test will not show shorted turn, need to use ringer test), I use SENCORE LC75 for testing, bad lamps or bad soldering works on the lamps. See http://s807.photobucket.com/home/budm/allalbums for some guide.

Mar 31, 2010 | ViewSonic VX710 17" Flat Panel LCD Monitor

2 Answers

Monitor goes blank after 3 seconds -Samsung SyncMaster 920NW


Could be a power issue. If it doesn't show anything at all then that may be the case. It may also be the display itself. It would be a costly repair so you might be better off finding a new monitor.

Sep 16, 2009 | Samsung SyncMaster 920NW Monitor

1 Answer

My monitor keeps going to a black screen a coulpe of seconds after being turned on


Video (picture) must be constantly entering a monitor for a monitor to continue to display a picture after it self tests (goes on for a second or, two) Your monitor is fine; check it using another known good computer.

May 20, 2009 | Vision Computer Monitors

3 Answers

Screen goes black, but power light is on (not blinking)


The problem is not with your screen. Its the problem of Video Card of your system which is unable to send Video Signals to the Screen.

Apr 23, 2009 | Daewoo L700C 17" Flat Panel LCD Monitor

1 Answer

Screen keeps blinking showing a anolog sign in the bottom right corner


Perhaps you are using the Blue plug (VGA) instead of the White one (HDMI)?

---------------------------
Chris
Water Ionizers

Nov 28, 2008 | ViewSonic VX710 17" Flat Panel LCD Monitor

1 Answer

The problems is my monitor (VeiwSonic VX910) is blinking evey few seconds from destktop screen to black screen. help!!!


PSU- Board, Rev.C
Item: B-PS-0204-0076
Compatible with: VX710 VX910 VX912 VX924
BER-2 Number: D9 SCRAP NOT AUTHORIZED
(This item has been discontinued and not available to order.)
Please order B-00002481 instead. Your Price: US$45.00 Each

Jan 08, 2008 | ViewSonic VX910 19" LCD Monitor

2 Answers

Picture shows up for about 3 seconds then the screen goes black


XEROX 19" (XG92D) 5 MONTHS OLD...IT GOES TO WHITE WHEN WINDOWS TELLS IT TO TRUN OFF AFTER 2 HRS...IT GETS HARDER TO COME ON EACH TIME IT IS TURNED OFF. I TOLD WINDOWS TO NEVER TURN IT OFF. IF THE POWER GOES OFF I MUST TURNED IT OFF AND ON MANY TIMES, THEN IT COMES ON. I THINK IT MAY NOT COME ON NEXT TIME...

Sep 26, 2006 | Xerox XG-91D 19" LCD Monitor

Not finding what you are looking for?
ViewSonic VX900 19" LCD Monitor Logo

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top ViewSonic Computer Monitors Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a ViewSonic Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...