Question about Evenflo Generations

1 Answer

I have an evenflo baby suite classic playard. The bottom will not stay flat no matter what i do. I made sure that the legs were extended but it still keeps on popping up and i cannot return it to the store as i bought it off a stranger. Can you please help me. thanks My email addy is cherdon@sympatico.ca

Posted by on

  • eddydk Apr 17, 2009

    same problem - cannot get the botton to stay down. Instructions not helpful. (Evenflo portable playard) Brand new, but bought months ago and just opened or I'd return it! thanks

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 61 Answers

Please take the information off this play yard and check out this website for a recall purpose CPSC (Consumer Product Safety Commission) http://www.cpsc.gov/ or give Evenflo a call at Evenflo ParentLink Department at 1-800-233-5921.
I am willing to bet this is too old to be using for your child due to safety issues, maybe been recalled due to the popping up, fingers/toes getting pinched or stuck or even a child severely injured. PLEASE be careful when purchasing 2nd hand equipment for your baby/infant/child. Someone else's gift off could be your tragedy.

Take Care, GrandmaJ

Posted on Nov 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Evenflow happy camper pack n play cant make it stay up


Go to evenflo.com at the bottom it has "product instructions" click it...then enter your manufactor number...if you can't find it it has a list of products and where the manufactor number is located.

Jul 30, 2011 | Evenflo Babygo Portable Playard With...

1 Answer

My evenflo travel system will not stay open. When you get it out you squeeze the handle and it opens but wants to immediately close back...it never clicks so that it will stay open. what can i do to fix...


Make sure that nothing on the bottom (near foot rest) is holding the stroller up from opening.

This is usually what happens.

Please let me know if you need further assistance.

carsandcomps,

Guru, Premium Expert @ Fixya.com

May 20, 2010 | Evenflo Aura Elite Travel System Wedgewood...

1 Answer

Center of playard not locking


go to simplicityforchildren.com they have a video on how to assemble the playard

Apr 17, 2009 | Cosco Beatrix Potter Playard Crib

2 Answers

I need assembly directions for evenflo exersaucer triple fun.


1. Remove toys and seat from the exersaucer.
2. Fold exersaucer, but do not let the tray lock to the base. With exersaucer flat on the floor, twist each leg assembly (B) fully clockwise until it stops. Fully depress one of the pedestal locking tabs (C) then push on the leg assembly (B); leg will partially fold. Repeat this for all four legs. After pressing the fourth pedestal locking tab (C), the Exersaucer will fold with the tray (D) rotating toward the base (E). Make sure all four tray locks. (F) are locked onto the base before trying to carry exersaucer.
3. Place your fingers beneath the legs (A) push upward to disconnect the leg assemblies from the pedestals (B). Repeat for all 4 leg assemblies.
4. After all four legs have been disconnected from the pedestals, remove tray assembly (C) from the base (D).
5. Turn tray (C) upside down and remove both end caps (E) from beneath.
6. Squeeze both locking tabs (F) on each side of the tray to disconnect and seperate the tray halves (C). 7. Connect tray halves (C) to form activity table.
7. Connect tray halves (C) to form activity table.
8. Rotate leg assemblies (A) fully clockwise until they lock into postition. Make sure all four legs lock (G) are locked properly into the uper leg pedestal (H). Also make sure all four leg locks (I) are sticking out past the edge of the tray.
9. Turn table over and install two end caps (E). Make sure both end caps lock into place. NOTE: one end cap installs from above and the other installs from below.
10. Install toys on activity table. If desired, adjust table to the appropriate height for your child. IMPORTANT: NEVER use stage 3 without end caps!

Mar 20, 2009 | Evenflo Exersaucer Triple Fun Active...

1 Answer

Lost instructions to the evenflo triple fun excersaucer


put the bottom and top togather where the 3 holes are on top put the springs put the caps on and turn them. You will have to use a little pressure but they will turn

Dec 21, 2008 | Evenflo ExerSaucer SmartSteps ABC Stroller

2 Answers

Need directions on how to fold legs


Hi, I can fix this.
First, on the bottom of the legs, there is a thumb latch, press that all the way down into the hold it is in. do this on all three legs.
Then once that is done turn the whole thing to the left, it should fold in two, on the sides, there are three latchs that go into the hole next to the small legs, those latches secure it in place.....

To unfold, simply press on the holding latches, and pull up.

Good Luck.

Gordon & Shirley

Nov 17, 2008 | Evenflo ExerSaucer SmartSteps ABC Stroller

1 Answer

I cant get it lock so baby can play in it!!!!!


you can try pulling the middle piece up and keep it up while pulling the sides into place, they should lock and you shouldn't be able to push on they and have them collapes. After the sides are in place, push the middle piece down and that should do it.

Feb 06, 2008 | Cosco Beatrix Potter Playard Crib

Not finding what you are looking for?
Evenflo Generations Logo

Related Topics:

702 people viewed this question

Ask a Question

Usually answered in minutes!

Top Evenflo Baby Gear Experts

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Iron
Iron

Level 3 Expert

3018 Answers

Stitch85

Level 1 Expert

27 Answers

Are you an Evenflo Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...