Question about Philips 50P8341 50" Rear Projection Television

1 Answer

Philips 50P8341 green light

Hi,
Thanks for your response when i turn on the tv i get a quick red and blue line for 2 seconds and then disappears and then the green light appears and stays there for as long as i have the tv on like a bow facing down the line is not in the middle it is coming from the upper part of the screen and going down about 6 inches and the in goes back to the top of the screen forming a bow like shape

some other tech at fixya have told me to Check fuses 1800 and 1801. Also check diodes 6809 and 6810 If there is High Voltage then replace Diode 6003 and Resistor 3669 when replacing the above parts also replace Diode 6012 and Diode 6025 they also tell me it is a defective vertical output
please let me know what you think
Thank you for your time

Posted by on

  • dtmsinc Aug 21, 2008

    Hi

    could you please tell me where are the vertical output IC and if they the same as the coverange ic

    Thanks

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Philips Master
  • 8,617 Answers

I believe its the vertical output IC. Diodes would tend to blow fuses . I would replace the vertical output and see if that takes care of the problem.

Posted on Aug 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My husband placed our Philips 50P8341 Projection TV on its back in order to replace the casters on bottom. When he put tv back to upright position and turned it on all we see are red and green lines. We...


you need to reset your convergence, if you have the original remote, is there an auto convergence button, if not go to the menu and do it manually, align the colors and the lines will go away

Aug 11, 2010 | Philips 50P8341 50" Rear Projection...

1 Answer

Too much yellow does not adjust with normal drop screen adjustments. can i adjust the light beams.on my philips 50"


Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} 1. Turn the green screen control on the Focus Block until retrace lines appear and gradually turn it back
Until the point where you can see the retrace line disappears, just before cutoff.
2. Turn the red screen control on the Focus Block until retrace lines appear and gradually turn it back
Until the point where you can see the retrace line disappears, just before cutoff.
3. Turn the blue screen control on the Focus Block until retrace lines appear and gradually turn it back
until the point where you can see the retrace line disappears, just before cutoff.
4. If the screen still appears too bright after proper G-2 adjustment, you need to adjust the sub-bright adjustment in the service menu
control down until screen cut-off. (Service data Range is usually 21 to 25 in the Service menu, for Sony sets you first go to category "MCP2", & then adjustment item 01( "SBRT")= subright.
For electrical the focus, put on the screen a clear picture of your choice thru an input of the TV set from a DVD, then pause the playback of the DVD Look into each color and rock that color focus control back and forth (turn the control one way then the other way slowing down as the picture goes into the best focus. till the picture looks sharp do each color till they all look in focus. NOTE: it is best to look into each color tube to achieve the best electrical focus. For optical focus please follow the manual lens adjustment in the sets service manual
By Larry Dillon

Aug 27, 2009 | Philips 50P8341 50" Rear Projection...

1 Answer

Philips 50p8341a - the red converges, the blue does no move. the screen is all reddish with orange lines in it. the sound is ok. took the back off and the red and blue big lights are on, but the other big...


Hi, convergence IC`s have failed, set is usually a good one, call your local tv shops and get a price to replace the "convergence IC`s ", good luck, video-tek

Jul 01, 2009 | Philips 50P8341 50" Rear Projection...

1 Answer

Problem with tv 50p8341 might have found the solution


The green line across the TV if its in the middle is usually loss of vertical deflection so that can shut the tubes down for protective purposes. Check the vertical output IC thats what is most likely causing the problem. The flyback is working if theres a green line across the middle of the screen.

Aug 20, 2008 | Philips 50P8341 50" Rear Projection...

1 Answer

Philips 50P8341 50 in. Rear Projection Television


Sounds like the blue convergence IC s bad. They are relatively easy to replace if you can solder they cost around 10.00 each and you should change both the red and the blue.

Feb 09, 2008 | Philips 50P8341 50" Rear Projection...

1 Answer

Philips 50P8341 50 in. Rear Projection Television most of the color is red


Usually if you remove the speaker grill in front there is a convergence panel that can be carefully removed. If you look inside you should see a small rectangular block with six controls. They are labelled focus and screen, and red, blue and green. Adjust only the screen controls very carefully and slowly. I would recommend reducing the red slightly brfore raising the green and then blue until the picture looks acceptable. Be sure to center the on screen controls before starting.

Nov 18, 2007 | Philips 50P8341 50" Rear Projection...

Not finding what you are looking for?
Philips 50P8341 50" Rear Projection Television Logo

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72601 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...