Hi, I have a Lexmark C510 Laser Printerphotodev exhausted message, changed it and still have the massage! Maybe it needs to be reset? I shut it off and restarted, but still have the message.. HELP! lol. Thanks, Tom

If you are getting this error message, there is a need to replace the following:
Marker sensor - 56P1684Engine Board - 56P1639 I/O board - 56P1617LVPS - 56P1641

I

Here's an article in the Lexmark website on How to Replace the Photodeveloper Cartridge in the C510. Just click on this link: http://bit.ly/bOJQDz. Follow the instructions carefully. Hope this helps.

With that " 956 service TCSD system board" error message, the only you can do is to replace the Rip/System Board. Hope I can assist you more on this.

Hi, This error could be due to several things, the most common one is that whatever is being sent from the computer is not being recognized by the printer causing the 900 Rip Soft Error. You can try to reset the printer and try sending the print job again. If the error persisted. Then the problem could be a hardware problem with the System Board.

You need to replace the toner cartridge

it is the problem your copier drum unite

Recycle the power a few times, if that doesn't work first reflash the engine firmware (you would need to contact Lexmark for that) failing that replace the engine board.

The photoev cart is the photo developer cartridge.

See User Reference
http://www.lexmark.com/publications/pdfs/c510/eng/userref.pdf

Understanding printer messages
pages 184 and 185

"Message:
83 Photodev Cart Exhausted

What this message means:
The photodeveloper cartridge is completely used.

What you can do:
Replace the photodeveloper cartridge.
See also: Replacing the photodeveloper cartridge [page 73]

Continuing below
Message:
83 Photodev Cart Life Warning

What this message means:
The photodeveloper cartridge is nearing the end of its life.

What you can do:
• Press Go to clear the message and continue printing.
• Replace the photodeveloper cartridge.
See also: Replacing the photodeveloper cartridge [page 73]

Continuing below
Message:
83 Photodev Cart Missing

What this message means:
The photodeveloper cartridge is either missing or incorrectly
installed.

What you can do:
Correctly install the photodeveloper cartridge to clear the message and continue printing.
See also: Replacing the photodeveloper cartridge [page 73] "

Message:
Invalid Engine Code

What this message means:
The printer engine code has not been programmed or is not valid.

What you can do: [Not much]
Call for service.
See also: Calling for service

See User Reference
http://www.lexmark.com/publications/pdfs/c510/eng/userref.pdf

Understanding printer messages
pages 184 and 185

"Message:
83 Photodev Cart Exhausted

What this message means:
The photodeveloper cartridge is completely used.

What you can do:
Replace the photodeveloper cartridge.
See also: Replacing the photodeveloper cartridge [page 73]

Continuing below
Message:
83 Photodev Cart Life Warning

What this message means:
The photodeveloper cartridge is nearing the end of its life.

What you can do:
• Press Go to clear the message and continue printing.
• Replace the photodeveloper cartridge.
See also: Replacing the photodeveloper cartridge [page 73]

Continuing below
Message:
83 Photodev Cart Missing

What this message means:
The photodeveloper cartridge is either missing or incorrectly
installed.

What you can do:
Correctly install the photodeveloper cartridge to clear the message and continue printing.
See also: Replacing the photodeveloper cartridge [page 73] "