Question about RCA HD52W66 Projection Television

2 Answers

Hdtv wont turn on

My rca hd52w67 will not turn on. I bought it brand new, and use it for maybe 3 months and after that I put it in storage for a long while. I have it out of staorage and when I plugged it up, and push the power button, it illuminates for about ten seconds, and you here the power on sound but tvgoes off. When I try to push the button again, it wont illuminate until after 30 seconds and then the power light comes on, and repeat, but tv never comes on. What seems to be the problem?

Posted by on

  • larryp34689 Aug 21, 2008

    No! The solution wasnt helpful. It wasnt the problem you said that it was. I took off the back cover, and push the reset button and it came on. Thanks anyway.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 521 Answers

Its the problem in your powersupply board.may be one of the capacitor have gone short due to moisture or because of rare use .when you on the tv after many days the curren load passed through it was very much at that particular time.and the capacitor have gone short.you can replace the capacitor your self with the help of soldering iron.if you have any knowledge about it .or a technician help is much advisable.the charges will not more then his service charge.if the tv is under warranty period call the service center it would be free of cost.thanks.rate the solution if helped.keep me updated for further help.bye.

Posted on Aug 20, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 623 Answers

Moisture might be the problem check circuit board

Posted on Aug 20, 2008

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rca HD52W67 wont turn on its bout 6 yrs old


Power supply problem, you can probably get a kit on-line.

Nov 14, 2011 | RCA HD52W59 HDTV Projection Television

1 Answer

RCA hd52w67 analog convergence problem.


with Tv off press and hold ch- and vol- at same time untill tv turns on then release and you should be in factory settings service mode.

May 26, 2010 | Projection Televisions

2 Answers

I have a 52" rca hdtv. the screen looks like its in 3d. can this be fixed? model# hd52w67


It seem like a convergence trouble. I tink it is a ITC222 chassis in this set. If it is, you probleme is eeprom for convergence need to be reprogrammed and cause no power on convergence board.

Apr 22, 2010 | RCA R52WM24 52" HDTV Projection Television

1 Answer

52" hdtv rca hd52w67


check that board where you replace the fuse on the back look very close at the transformer the big black one and check the soldering it is cracked resolder it and you should be ready to go.. just look very close they are smalllllll cracks need good light.. thats what i had on mine and works good..
'

Apr 08, 2010 | RCA HD52W59 HDTV Projection Television

1 Answer

I have an RCA HD52W67 and it just started to have


I'm having the same problem with my RCA HD52W67 rear projection TV and I've notice this problem is listed with my other owners of this product. I have no experience with fixing electronics. Sould I try this myself or take it to an expert? Has anyone fixed this problem? What is an estimated cost involved, if I take my set to an expert? Any advice with the HD52W67 is great appreciated.

Mar 19, 2010 | RCA HD52W59 HDTV Projection Television

1 Answer

Hd52w67


No! The solution wasnt helpful. It wasnt the problem you said that it was. I took off the back cover, and push the reset button and it came on. Thanks anyway.

Aug 20, 2008 | RCA HD52W59 HDTV Projection Television

1 Answer

Rca hd52w67


the ignition panel ve been coruptted
replace it

dont forhet to rate me!!

Aug 19, 2008 | RCA HD52W59 HDTV Projection Television

2 Answers

HDTV R52WH74 TV WILL NO TURN ON


I would contact RCA support, and they should be able to provide you with the authorized RCA service centers in your area.This is the RCA customer Service number 580-634-0151

Jul 08, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

MY TV WONT WORK, I NEED A NUMBER FOR RCA. IT IS ONLY 5 MONTHS OLD, BOUGHT BRAND NEW, NOW IT WON'T TURN ON


Did you buy the walmart special,the ones they had on sale for 780.00, RCA has produce a nightmare these sets have all kind of problems.

Jun 12, 2008 | RCA Projection Televisions

3 Answers

RCA HD52W67 Projection TV


open it up and you will see the burn marks pull the board and re solder it the hole in the board

Feb 23, 2008 | RCA HD52W59 HDTV Projection Television

Not finding what you are looking for?
RCA HD52W66 Projection Television Logo

Related Topics:

183 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

D. E. Hev

Level 3 Expert

1059 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

Are you a RCA Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...