Question about Blaupunkt Car Audio & Video Accessories

1 Answer

Code hi bat went flat and seat cant decode it can any one help please it is a blaupunkt werke gmbh part number 7612 001 436 seral is SEZ1Z7A2322763

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 65 Answers

If it is a original radio in car, you can go back to bosch service center for the decode on the password.

Posted on Nov 28, 2013

2 Suggested Answers

bobby boy84
  • 1 Answer

SOURCE: i bought an Audi A3 secondhand with audi chorus

You must retrieve the code that comes with the Audi's radio unit. To change to safe mode:

  1. Turn on radio. The radio display shows "SAFE".
  2. Press the P.Scan and RBDS buttons simultaneously and hold until "1000" shows on the display. Release the buttons. Do NOT press these buttons again, otherwise the radio will consider "1000" to be the code.
  3. Use Preset buttons 1 ... 4 to enter the four-digit code number from your radio card. Preset button 1 corresponds to the first digit, Preset button 2 corresponds to the second digit, etc. Each press of the button increments the number by 1.
  4. Once the code shown on the display is correct, press the P.Scan and RBDS buttons simultaneously and hold until the word "SAFE" appears in the display, then release the buttons.
  5. The radio should unlock and be usable shortly afterwards.
  6. If an incorrect code is entered, the word "SAFE" appears, first flashing and then continuously. You can repeat the above steps to unlock the radio once more, the number of attempts will be shown in the display. If an incorrect code is entered again, you radio will be locked for about one hour. After one hour - the radio must stay on and the key must remain in the ignition lock - if the display goes out, the you can repeat the above procedure to unlock again. The cycle - two attempts, one hour lock-up - still applies.
  7. If you lose your radio code, contact your Audi dealer.

Posted on Jan 28, 2010

  • 1 Answer

SOURCE: safe code for blaupunkt gmbh

halo wv mfd code serial : vwz1z7d4253372 plss plss

Posted on Apr 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hi can anyone help me with an unlock code for my blaupunkt 420 plz???


Do you have a 10 number serial code on it. Not letters, just numbers.

Dec 01, 2015 | Blaupunkt Car Audio & Video Accessories

1 Answer

I need code for BLAUPUNKT-HERKE GMBH 7648245380


Blaupunkt radio's are kind of funny when it comes to different vehicle say a BMW or Renault or some of them have to start with a 1 or a 0 or just a standard Blaupunkt. In any case I ran it for a BMW, a Renault, a standard and the kind that has to begin with a 1 or a 0. I came up with 3 different codes. They are 9742, 1742 and 6237. Hope one of them work for you. This is new decode software I use for my business that I just purchased and has worked 100 percent on Ford radios but this is the first Blaupunkt I have ran it for so I am curious as to if it worked or not so if you wouldn't mind letting me know either way by replying/commenting here or feel free to email me directly at csautomotivecars@att.net I would appreciate it. Also if you have a Citreon codes are different as well as some mercedes and I would have to run it through a little different on this software. So the same apply's if you need me to run it through a different way and don't mind doing it. I really hope one of those work for you though...

Sep 23, 2013 | Car Audio & Video Accessories

2 Answers

I bought an Audi A3 secondhand with audi chorus Blaupunkt-WERKE GMBH 7648 245 380 SERIEL NO AUZ1Z2X678588 ,the radio is on a safe mode please help me with the code and the method to enter the code


You must retrieve the code that comes with the Audi's radio unit. To change to safe mode:
  1. Turn on radio. The radio display shows "SAFE".
  2. Press the P.Scan and RBDS buttons simultaneously and hold until "1000" shows on the display. Release the buttons. Do NOT press these buttons again, otherwise the radio will consider "1000" to be the code.
  3. Use Preset buttons 1 ... 4 to enter the four-digit code number from your radio card. Preset button 1 corresponds to the first digit, Preset button 2 corresponds to the second digit, etc. Each press of the button increments the number by 1.
  4. Once the code shown on the display is correct, press the P.Scan and RBDS buttons simultaneously and hold until the word "SAFE" appears in the display, then release the buttons.
  5. The radio should unlock and be usable shortly afterwards.
  6. If an incorrect code is entered, the word "SAFE" appears, first flashing and then continuously. You can repeat the above steps to unlock the radio once more, the number of attempts will be shown in the display. If an incorrect code is entered again, you radio will be locked for about one hour. After one hour - the radio must stay on and the key must remain in the ignition lock - if the display goes out, the you can repeat the above procedure to unlock again. The cycle - two attempts, one hour lock-up - still applies.
  7. If you lose your radio code, contact your Audi dealer.

Sep 12, 2009 | Car Audio & Video Accessories

Not finding what you are looking for?
Car Audio & Video Accessories Logo

Related Topics:

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Blaupunkt Car Audio & Video Accessories Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

john h

Level 3 Expert

7167 Answers

bigdawg7299

Level 3 Expert

2363 Answers

Are you a Blaupunkt Car Audio and Video Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...