MY EEE PC WONT BOOT UP IT SAYS LAUNCH STARTUP REPAIR BUT NOTHING IS WORKING IT GOES BACK TO THE SAME PROBLEM

It is most certainly a driver, but if you cant access the safe mode also that could be a hardware issue.. Try to troubleshoot with a windows installation cd. Put it in and boot the pc. It will start the windows instalation, you choose repair computer and not install windows. The command prompt will open, try to troubleshoot from there.. Thanks!

if you can get hold of a windows disc try booting from that and using the repair option.

Hello.

Sounds like the Windows Recovery Partition is corrupted or your hard drive may be faulty.

But, first try to boot your system in Safe Mode (press F8 repeatedly as it boots) and choose Safe Mode or Last Known Good.

If it still doesn't boot properly, try the diagnostics to determine if a hardware problem - boot your system and press F 12 (or F2) repeatedly.

Hope this helps.

Restart your computer..start tapping F8 quickly..if you reaches advance boot menu..there select repair my computer..then select the language..then enter your username and password if you use any..in recovery options you can try startup repair or system restore options..lastly if nothing works then select the factory image restore which will take your computer to factory settings but delete everything

Had that problem a few times myself.
Only way I could fix was to restore back to factory condition.
As you boot, watch bottom of screen closely.
depending on system, Should need to press F2, F10, possibly F12, might even be Del.
Most likely you didn't get restore disk, or have made one.
If you do, insert disk before boot up. System should boot to DvD.
Don't forget once restored to update.
Hope this helps
Don

It smees your windows having some problem. It might crash.
try to boot the PC from CD, repair the windows. if it cannot repair, then better do fresh loading.

1. Press F8 as it's booting and select 'go back to last working configuration'
if that doesn't work, go to step 2.
2. Press F8 as it's booting, and choose 'Launch startup repair' (I'm assuming you have Vista/Windows 7). If your on XP, you need to do a windows repair which is described here: http://www.michaelstevenstech.com/pdf/XPrepairinstall.pdf

do you have the original disc?

if so start with it and run a repair on the os

USE A BOOT CD AND RECOVER THE FILE AND MAKE SCAN VIRUS

rapidshare.com/files/51117041/ERD-2007.rar


IF YOU HAVE SATA DISK DISABILITATE SATA IN BIOS... TRY....

when you restart try to press F11 while booting..check