Question about Audio Players & Recorders

1 Answer

I have no sound coming from my speakers. Have tried all the troubleshooting option and still have the defect.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 682 Answers

1-make sure that digital input source is selected.
2-make sure all audio connecting plugs are pushed in all the way.
3-make sure that polarity of speakers is correct.and the bare wire of cables not in contact with any metal part.
4-make sure that speakers cables not short with each other.
5-check volume and confirm that is not set to low level.
6-check that system is not in mute position.
7-head phone jack is not inserted.
8-repeat your speakers set up and confirm all speakers are on and in good sound level.

Posted on Aug 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Playing cd's no sound from the speakers when I have the cd/dvd option selected. When I put the reciever on I can hear dead air coming thru the speakers but not when I have the cd switch selected....


You need to find the manual and/or read and understand every indicator and evaluate how it affects the sound. Use a medium volume setting while troubleshooting.Check connections.

Start with the basics. Speaker test ok? FM ok. Digital sources assigned yada yada.

Register and download the manual for free at retrevo.com

http://www.retrevo.com/support/Kenwood-VR-8060-Receivers-manual/id/480ci254/t/2/

Jun 30, 2011 | Kenwood VR-8060 6.1 Channels Receiver

1 Answer

Front Speakers stopped working


turn on your video and start something playing, press the speakers button repeatedly until the sound comes back. this should bring back your front speakers, if it doesn't, double check your speaker connections and sound field program.

the speakers button should cycle through all available front speaker options.

Nov 16, 2007 | Yamaha HTR-6030 Receiver

1 Answer

Using only Stero speakers. Sound only from right speaker. Left not working. However if I select tuner (not tuned in) the speaker works. Diconnected wires numerous times. Any help would be...


Hello
Check its audio settings. If the 'balance' control is at its one extreme, one speaker of that side son't work. When you select 'tuner' the the set sutomatically goes to 'Mono' [according to selection]; and both speaker will work. Check if stereo option is activated in its audio option first. If not, select it to stereo, dolby digital or so what you want ot hear. If all selections are OK, and still the problem perists, its digital processing section should be troubleshooted. Actually this is not a user repairable option. Contact any experienced service personel or Panasonic Authorised Service Center at your town. OK.

Jun 29, 2011 | Panasonic SA-HE70 Receiver

2 Answers

My sony amplifier does not work No sound comes from amplifier


its sad to say" that its defective but have you try checking the speaker wires? from the Sony amplifier to the speaker.

Aug 25, 2010 | Audio Players & Recorders

1 Answer

Only 2ch sound on sony strde898


I understand that you have tried connecting different audio source to the Receiver as some of the audio source will output only 2 channel audio. I hope you have tried changing the Input mode and Input selector to get the surround sound.
Please disconnect the speakers with the receiver and clean the edges of receiver and speaker cables using solution like alcohol and try.
If the issue persists, please interchange the rear speakers with front speakers and vice versa and check if audio is coming to make sure that the speakers are working fine.
If the audio comes after replacing the speakers but not from surround speakers, the receiver requires service.

Sep 22, 2009 | Sony STR-DE898 Receiver

1 Answer

System has power and cd's spin but no sound coming from the speakers. checked all connections and tried speakers with a different system they work fine. Please advise, Frank


First, check volume levels in mixer, both output volume and cd input volumes...Go to control panel>sound and audio devices>hardware and check to see that your sound card and drivers are working properly. Use troubleshooter if devices are disabled or not working properly. Make sure advanced settings for sound are correct for your speaker type....
Also see this article: http://support.microsoft.com/kb/307918
or search sound problems vista for alternate article.

Apr 20, 2009 | Audio Players & Recorders

2 Answers

7.1 speaker setup: no sound coming from right front/surr speakers


Solution to having no sound coming from certain speakers in a 7.1 speaker setup for TX-SR606 receiver when playing a DVD.

Review the cable setup for the DVD player since it was identified as the source of the problem. Best to unplug and plug in the cables to ensure they contact the back of the receiver's RCA jacks. Redo the microphone setup for Audyssey 2EQ calibration. A good chance that it is the cable that may have caused the malfunction and loss of sound from the speakers. The cables can come loose during setup and not plugged all the way to the back of the RCA jacks or a defective cable causing signal loss.

Apr 15, 2009 | Onkyo TX-SR606 Receiver

2 Answers

Onkyo digital reciever has poping noise when in dolby sound


I have the same reciever, and had the same problem.  Contact Onkyo, this is a known issue where defective DSP chips were used and manifest problems with a popping / clicking sound when using surround settings.  These receivers also have a Dolby Digital input issue that can cause audio dropouts when watching cable or SAT broadcasts that encode DD using a 'newer' broadcast encoding methods.  Onkyo is covering the cost of that repair for me now, even though the receiver is 5 years old now....

Jan 02, 2009 | Onkyo TX-DS797 Receiver

1 Answer

No sound to right speaker


It's probably just a cable problem. Reconnect the RCA cable from the receiver to the right speaker and even try to replace the cable. Good luck.

Jan 19, 2006 | Yamaha HTR-5250 Receiver

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

98694 Answers

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

The Knight
The Knight

Level 3 Expert

69654 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...