Question about Danby DWC283BLS Wine Cooler

2 Answers

E7 Code My danby wine cooler keeps coming up with E7 as a code. What does this mean. I had a leak in the Evap. but repaired that.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 750 Answers

Dera grezni

Hello
Welcome to fixya.
I'm Huuum and happy to assist you,


Sounds like we need to try to reset the system!

Huuum At your service!
Lets try this,
With an error code.
This can reset the system if it is electronic!
Unplug the appliance and wait a 5 minutes then restart it.
If you can't reach the plug, use the breaker to cut the power for 5 minutes.

It's like rebooting your computer when its acting strange!
Usually it corrects some error problems if they are not serious.
Or they are sometimes just a glitch.

Let me know how it works! Waiting for your reply!
Please remember to leave a rating when you are done!
Thank You huuum

Posted on Sep 28, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

We have same problem with our cooler we switched of for 5mins but they is no change

Posted on Jan 05, 2014

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is my Danby wine cooler heating up rather than cooling down?


Check out our Danby wine cooler repair video. Hope it helps.

Jun 27, 2015 | Wine Coolers

1 Answer

Compressor getting hot


I have the same cooler with the same problem and I've been researching this for several months now to no avail. It worked trouble free for over seven years before having problems. My local "authorized" Danby repair dealer advised me to: "Chuck it out, the parts are too hard to come by and it's impossible to get any parts or response from Danby". I attempted to contact Danby on my own and their 800 help line is non-responsive/non-existent. Be advised that Danby appears to have become just a middle-man importer now; the units are manufactured in China. Since I've had a problem finding a wine cooler that looks as good as this one that fits in the slot I have for it in my kitchen I decided to try repairing it myself.
I've replaced the circuit board/display and the thermistors with parts obtained through Sears, and the compressor still gets hot and the inside upper and lower temp. will not cool below 61- 64 degrees (+/- 2 deg.), respectively. All the fans are working properly, so I know it's not a fan, thermostat (circuit board) or thermistor problem. I think now it's either the compressor or else a thermoelectric element. I doubt if it is a refrigerant leak because that is least likely in a closed system like this. My only recourse now is to take it in to the local repair shop and have them take a look at those two items or keep looking for a replacement. Hope this helps. Good luck!

Aug 05, 2013 | Danby DWC283BLS Wine Cooler

1 Answer

Danby DWC283BLS has condensation inside the unit.


wine coolers have no means of draining the condensate inside them,use silica gel(1/2 pint)to keep the inside dry(remember to dry it out when condensate happens again)

Jul 16, 2010 | Danby DWC283BLS Wine Cooler

1 Answer

E4 Code


Dear moriquenda
welcome to fixya.
Did you try resetting the system by pulling the plug and waiting 5 minutes then restarting the wine cooler?This may solve you problem.

Danby expects customers to call service and does not imagine the rest of the world being able to utilize these codes.
Closed minded, Huh?

Please remember to leave a rating!
Huuum

Sep 28, 2008 | Danby DWC283BLS Wine Cooler

2 Answers

Danby wine cooler repair


call Danby at 800 263 2629, you can order parts from them

May 10, 2008 | Danby DWC283BLS Wine Cooler

1 Answer

Danby Wine cooler runs and runs


not hard to replace but you are correct if it is not cycling off at the temp you want it to then the temp control is the problem

Apr 12, 2008 | Danby DWC283BLS Wine Cooler

3 Answers

Danby DWC283BLS Wine Cooler - Error message E3 & E4


Is the compressor running? I don't know this unit, but know that if you are too warm that is the first thing to check. In reading about another unit that had a different problem, it was mentioned that there is a ciruit board. If it has relays on it then these are the most likely culprit. They are either not making contact or staying in contact too long... sometimes just tapping each relay usually a black plastic component will cause it to work intermittently..Not sure if you can get these but call the company help line at 1-800-263-2629.

Jun 12, 2007 | Danby DWC283BLS Wine Cooler

Not finding what you are looking for?
Danby DWC283BLS Wine Cooler Logo

Related Topics:

361 people viewed this question

Ask a Question

Usually answered in minutes!

Top Danby Wine Coolers Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Anastasio Benjou

Level 2 Expert

99 Answers

Are you a Danby Wine Cooler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...