VOICE NOT CLEAR SOUND IN VIBRATION AND SPATTERD

either voice file corrupted or speaker is broken inside.. try changing to another voice and see if still sounds bad.. might have blown a speaker sounds like to me.

With game (any) loaded, you can usually see whether your version supports vibration although my games only list joystick/controllers.
Maybe CSGO has Vibr Headset option as well?
In any case, go to settings, then either controllers or sound settings, look for anything to do with vibration.
Then activate the option.
As I don't have the actual game, my help is just generic.
Hope it helps a bit.

When you try voice command and you cant speack any thing or sound is not clear than time out will appear If your voice is clear than your command are not found... Just try other word

u can try this
go to profiles then select the profile u want to activate then go to its customize menu and incoming call alert type and select it ringing

You can try changing the voice to a differant one. For an example a british voice or a female voice might be clearer for you.

I'm assuming that the voice is actually fine but just not that clear to you. If the voice file has a problem you can do a hard reset and it will reload the files and that may clear it up at the cost of having to setup everything again.

The Sound Profile only covers call sounds.
Sound Profiles
This menu allows you to specify how you are informed of
incoming calls.
Selecting a Profile
1. Touch ➔ Settings ➔ Sound Profile.
2. Touch the radio button next to the profile name. The
selected profile activates. Choices include:
• Normal
• Silent
• Driving
• Outdoor
Normal Profile
The phone’s profile defaults to Normal. Use the following
procedures to change the profile.
Editing the Normal - Call Profile
1. Touch ➔ Settings ➔ Sound Profile ➔ Normal.
• Touch the name field and not the radio button to the right.
2. Touch drop-down menu (upper-right of the screen) and
select Call.
3. Select the Call Alert Type field and select one of the
following and touch Save:
• Melody: the phone rings using the ring melody selected in the Ring
tone menu.
• Vibration then Melody: the phone vibrates and then starts ringing.
• Vibration & Melody: the phone vibrates and plays a melody
simultaneously.
4. Touch the Voice Call Ringtone field, touch to select a
ringtone and touch Save.
5. Drag the Ringtone Volume slider to the volume level you
desire (range is 1-7).
6. Touch the Vibration Pattern field, then touch to select
Vibration 1 - 5.
7. Touch Save to return to the Sound Profiles menu.
There is no mention of keyboard tones in the user manual.

The Samson G Track microphone is very sensitive. If you have it on the heavy metal base on your computer desk it will pick up the vibrations of computer fans. It's vital to get the microphone off the desk using a mike stand with a boom or invest in the G Track spider holder if you want to use the desktop stand.

You can do a test just by holding the microphone with your hand. You should get very little noise apart from the fan noise with will be very faint. That noise is much easier to remove than the vibration noise as removing the vibration noise affects how your voice sounds.

Hope this helps.

just down the mic volume and see als run the sound diagone test.

Here is what you need to do:
First, make a blank voice recording. It can be 1 second, trust me and do it :)

Second: Go into your menu and go to ringer types for text messages.

Select voice recordings (or reminders) it is the second one on the list.

Select the recording you just made (the blank one).

Make sure you have a vibration selected for the texts.

And there you go! Put the volume on max and have a text sent just to make sure it works and you do not hear anything.

I just did this as a solution for a customer who did not want any noise for the texts, just the vibration. For it to vibrate, it needs to have a ringer selected. Something a tester overlooked, no doubt.

This series of Nuvi has 2 sets of voices for several of the available languages. The standard set is pre-recorded words linked together to form directions. This voice is usually clearer. However you lose street names and expanded vocabulary. The Text-To-Speech (TTS) voices are reading letters to form words, and uses an algorithm to come up with the approximate pronunciation of the word. This may sound less clear, but provides street names. So, you can select a standard voice (settings-locale-voice language) and lose some functionality, or select one of the many TTS voices and try to find one that doesn't offend the ear.