I recently purchased this TV for a reduced price from Best Buy. It was only 50 dollars, yet it did not come with a manual or remote control. When I tried hooking up my Xbox 360 to play some games, I could not find an input channel or anything else of the sort. I tried changing the mode to AV and then DVD, but to no avail.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I had same problem was told by phillips that the only way to turn off is by purchasing a new remote. You can buy a universal remote but it has to have a cc button (close caption) on the remote to turn off. Purchase price for Phillips Mag remote is $26 dollars plus shipping and tax.
No, most likely scenario is that the cable company compressed the signal further so they can stuff more channels on the wire. The cable guy is caught in the middle of this. The poor guys will tell you anything to get you to turn your head, then they slip out the door. He can''t do anything and the company is looking at the big dollar. I don't think you will have much luck pushing back to them. I hope this helps.
Did the technician replace the thermal sensors too? I think there are a few, one is in the color wheel cover. I'd suspect that it could take 40 min. to heat a faulty sensor to the trip point, and that this could make the TV turn the lamp off.
I own a One-for-All universal remote (model URC-4220), and my booklet says the setup code for a Hitachi TV is either 0000 or 0145. If these numbers do not work, then I would buy a newer universal remote. They can purchased at Walmart for less than 10 dollars.
Since your problem is coming and going your vertical output Ic is prob still good at this time, It needs to be resoldered and this should fix your problem the repair tech may want to replace the Ic and this is ok too. Location of IC on board is Q301 Part number 23319832 and costs about 10-15 dollars plus labor.
If you do not get result you can purchase one video rf converter.
Rf converter contains one video input in yellow colour and two audio in red and white colour and one cable connector as outout.
Connect dvd output to this converter and tune the program in which place you receive dvd signal.
This problem is due to moisture content in the flyback transformer surrounding area. Due to this moisture content screen control voltage is changed. Without getting a exact voltage the indicator will not stop. 5 times blinking is only for screen malfunction. Make one general service by cleaning the deflection area and adjusting screen control the problem is solved.
It is not clear where you say input is from cable, do you mean the Scart input to your Sony TV?
Do not use Progressive scan(p), as this is not interlaced. The normal TV requires an interlaced(i) picture of 50 half frames per second giving 25 complete pictures per second to reduce flicker.
Some TVs and projectors and all monitors accept Progressive scan.