I cannot retreive my messages? I just get a busy signal. I had been dialing *98 but I must done something???? HELP Everyone is saying my message box is full and I have no way of accessing. GE multimemory speaker phone model 29385GE2-A Jan

check with your provider

fast busy signal (plural fast busy signals)

1. (telephony) An audible signal on a voice phone line that sounds more frequently than a standard busy singal, indicating that notransmission path to the called phone number is available.

What Does Fast Busy Signal Mean on Cell Phone eHow

First Option:
Phone in the Other Sim and check the Phone Network Signal If Network Signal Problem not Solved So
Secend Option:
Your Phone Network IC Fault So Please change Network IC
And Network Signal Problem will Solved
if it is there isn't much you can do on this side of the network.
Contact your phone company.

There are three elements to voice mail; having a Panasonic brand voice mail system, recording the greetings, and setting call forward conditions. Which ones have you done?

The default access to voice mail is extension 500 on the intercom, but we used to use 165. When you dial it, the lady says "welcome to the Panasonic voice processing system". If she doesn't or you're asked for a password, or you have not done the tutorial, then you need to do that and it guides you to the setup of the greetings, name, and password change. After that, you dial *710x 500 (or your VM access) # on the inercom to set call forward to voice mail, with 4 being no answer (my preference since it gives me the option of answering the 2nd call or letting it fall to voice mail), or 5 for Busy/No Answer.

The message manager (mailbox 998) and the system owner (mailbox 999) has the ability to access and change how the voice mail system performs. The owner can change your name for the directory or reset your password and/or
setup or delete your mailbox.

Carl

If you lost programming, you should have seen something on Ext 10 or 11 saying that the batteries were low and to change them.

Without call waiting or a second line, callers will get a busy signal if you're already on a call. This happens at the switchboard; it doesn't matter what type of answering machine you have because the second call doesn't get that far.
You can record your own message on the 1739 but, as mentioned above, if you're already on a call then the second call never gets that far.

even thou they delete apparently they are still on the comp  i think not sure thou if u go into history or cookies   something like that look along those lines  hope u find them..

busy signal can mean another phone on your line is till connected. remove each phone one by one till the line is open, this can be also a redial on a phone activating by itself, or if you have forward messaging activated it can do this as well if it stuck on.

This, my friends, is a very popular problem. It is caused by someone else in your company pressing the Message button on their phone while you are calling them or they are calling you. We strongly recommend to our customers that no one presses the Message button under any circumstances. To access your voice mailbox, always dial the Automated Attendant access code assigned by your installer - usually 165 (although on our systems it is "62" or the letters "MB" for MailBox).

You need to dial the Message Waiting Lamp feature code and dial "0" for the extension number. The code itself varies from system installation to system installation, but the most likely numbers are *70 and 70.


We have a support package that allows us to make all the changes you need over the Internet for a flat annual fee. If you want your whole system to work properly and all changes to be made for you at a flat budget, call us at 877-236-8376.

your retrieval # is wrong in your phone contact service provider for the proper retrieval # they will walk you through entering it into your phone you will need to be on another phone for this not your cell