Question about Lexmark Office Equipment & Supplies

2 Answers

Good morning, I have a Z645 printer which I have used with XP. I recently acquired a new computer - Vista and downloaded the driver -- used the installing CD, but the printer could not install a portion of it. Can you give me a next step? 248-541-3094 Thanks a whole lot. Mary Ellen

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Lexmark Master
  • 19,396 Answers

Lexmark does not distribute replacement install disk for all models.

Contact Lexmark here, to see if the disk for your printer is available.

If you do not have the disk you must download the software from Internet, follow instructions below,

Click here:Official Lexmark Drivers and Software

A web page will open, follow instructions, select model, select operative system etc., and click on download .
Chose to download the file in my documents when asked.
After downloading, find the file,double click on the file ,then if you get in troubles, follow the instructions below to reset and reinstall drivers:

  • Unplug printer USB.
  • Go to control panel >> installed printers in Windows and remove (delete ) any installed printer from printer list.
  • Download driver from website, or use the disk and run the install file.
  • Follow driver installation wizard.
  • Plug back printer when prompted from installation wizard.

Posted on Mar 02, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    MVP:

    An expert that got 5 achievements.

    Prodigy:

    An expert who has answered 500 questions.

    Sergeant:

    An expert that has over 500 points.

  • Master
  • 564 Answers

Nope..got to go here for that driver..

www.lexmark.com

find your model number under support..then the operating system version..

OR




Posted on Aug 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't found any scanner driver.....i can print but scann....it's impossible SCX-4300


What OS are you running? I don't see any full-feature software but the Samsung site lists a print driver, a scan driver, a universal print driver and a universal scan driver for Windows 2000 through Win7 x64. Similar drivers are also available for the Mac OSX. I'm not certain of the features in the "unified driver" for Linux. The full-feature software is available for Windows.

To find these drivers, go to http://www.samsung.com/ph/consumer/monitor-peripherals-printer/printer-multifunction/mono-multifunction/SCX-4300/XSS/index.idx?pagetype=prd_detail&tab=support . Click on the Downloads tab and then select Driver. The windows files are all .exe files.

For the SmartThru software go to the above link and select Software instead of Driver. With this software, you will be able to launch a scan from the printer if the monitoring program is running. You should be able to start a scan from the computer with any OS and the Samsung drivers.

Windows XP, Vista and 7 can all acquire scans with Windows software. You can use Paint in all three (File > Import from Camera or Scanner > New Scan). Vista and Win7 add Windows Fax and Scan (New Scan). Vista came with Photogallery and it acquires scans like Paint. (You can download it for XP or Win7.) The Mac also can acquire scans with included software.

One issue that can cause a scanner problem is a bad cable. Scanning requires bidirectional communication with the printer and thus may fail when the printer works. Replace the data cable and make sure to use a direct connection (no USB hub or print server) if you can launch the scan but then it stops.

I hope this helps.

Cindy Wells

May 15, 2011 | Samsung SCX-4300 Monochrome Laser...

3 Answers

Installing a printer to my computer


Hi,

Just run the CD and an installation wizard should pop up. Just follow the on screen instructions.

Jan 01, 2008 | Office Equipment & Supplies

1 Answer

I can not get my disk to load on our new computer, and when i try to do it manually it shows that it is installed but it still will not work.


To access the Lexmark Z645 XP driver, you may copy and paste the web address given below: 
http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:1:0:548:0:0&emeaframe=&fileID=8606&searchLang=en&searchLang=en
Please use the following steps to download the Lexmark Z645 XP driver to your desktop: 
1. Select "Window XP" from the drop down list
2. Click on "Download Now." 
3. On the "File Download" screen, choose "Save." 
4. The next screen will be titled "Save As." Choose to "Save in Desktop" and click "OK." 
5. You should see files being transferred. 
****Note**** If your browser uses a different file downloading format than specified above, you will need to resort to your browsers help files for downloading instructions. The object of steps 1 - 4 is to download the driver to your desktop. This way it is easily accessible. 
6. Once the files have completed downloading, double click on the icon with your file name.   7. On the "Win Zip Self-Extractor" screen click "OK." To unzip the downloaded file choose "Unzip." 
8. A screen will then display the number of files unzipped successfully, click "OK." 
9. Please follow the on screen instructions to complete installation of your Lexmark printer. 

May 26, 2009 | Lexmark Z645 InkJet Photo Printer

1 Answer

Drivers for windows 98


Hi,
Sorry you wont get the Windows 98 drivers for your printer model.. Please install Windows xp or other operating system and click on the below link to download the driver...

http://downloads.lexmark.com/perl/downloads/downloads.cgi

Thank you....

Jan 27, 2009 | Lexmark Z645 InkJet Photo Printer

1 Answer

Printer installation


http://downloads.lexmark.com/cgi-perl/downloads.cgi?lxkprod=Lexmark+Z645

Copy and paste the link above into your browser address spot and click to go.

Once it is open.

Scroll down 
and
 you will see the list of Lexmark Z645 supported OS.

Click the right Operating Software (Windows XP, Vista, 2000, Server)

Click and you will be refered to the page where you will click to download the driver and then install.

Ciao

Jun 09, 2008 | Lexmark Z645 InkJet Photo Printer

1 Answer

Intalling a Lexmark Z645 to my toshiba laptop without a disk


If this is a newer printer that can use a USB cable, then you want to boot up the laptop, If you arte running XP or Vista, make sure you have admin rights. Install software with the printer disconnected from computer. Once install is either completed or asks for printer connection, power on printer, wait a few moments, then attach the USB cable top a poert on laptop. Install should continue, and you should be good to go.

Thanks,
Daniel (rydf)

May 01, 2008 | Lexmark Z645 InkJet Photo Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...