Set up instrux for Texport Knollwood 2 person bivy tent
I need to get instrux. I bought the tent on Amazon and no instrux included. Seller did not respond to the request for them. Can I get them on-line? I can't seem to get it taunt and water pools and then leaks in.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
How to Assemble an Ozark Trail Tent ' Trails.com
How to Assemble an Ozark Trail Tent. ... The easiest way to do this is to position one person on each end of the pole ... Assembly Instructions for Ozark Trail Tents
Ozark Trail Family Dome Tent 15' X 9' Instructions
https://bepesepa.files.wordpress.com/2015/10/ozark-trail-family... · PDF file
Ozark Trail Family Dome Tent 15' X 9' Instructions ... Ozark Trail 8 man tent 16 x 10 family dome tent ... Ozark Trail Family Dome Tent 15' X 9' Instructions
Choose a spot to set up your tent. Look for level ground that's
free of large rocks or other debris. Make sure you're safely away from
your campfire. If it's possible, pitch your tent away from your kitchen
area as not to bring animals too close should they be attracted by the
smell of food. Once you've chosen a spot, clear the ground of small
rocks and sticks to give you a comfortable floor to sleep on.
Unroll your tent. Put the rainfly and poles aside. Open the tent
body so it lays flat on the site you chose. Orient the door so it faces
in an accessible direction.
Take out the tent poles. A basic Hillary tent will use two long
poles for the tent body and one short pole of the rainfly. Assemble the
two long poles and thread them through the pole guides on the tent body,
attaching them to the holes in each tent corner to raise the tent.
Open the rainfly. Assemble the shorter pole and guide it through
the top of the rainfly. Place the rainfly on top of the tent and secure
it to the bottom of the tent body with the attached hooks.
Stake down your tent. You don't want to be surprised by a storm in
the middle of the night or while you're away from camp. Stake your tent
even if the weather is clear when your arrive. Use a stake at least in
each corner of the tent. Find a rock to hammer them firmly into the
Clean the ground of any rocks,
logs or big sticks. Open the stuff sack and pull out all of the
contents. Pull the poles out of their pole bag and set them aside.
Remove the tent stakes and set them next to the tent.
Lay out the tent poles and
assemble them. Push the rod blanks together to make the tent poles that
will support the mesh tent body.
Unroll the mesh tent over the
cleared ground. Take care not to step on or walk on the mesh panels.
Avoid sticks and snags, as the mesh rips easier than nylon tent fabric.
Clip the Timbertop tent pole
clips to the poles. There are no tent pole sleeves because Timbertop
uses external pole clips for its mesh tents. Criss-cross the tent poles
and push the tent pole tips into the metal holes at the end of the pole
clip lines. The mesh tent will now be standing upright.
Place one tent stake into the
ground and through a pole strap stake hole. Pull the tent out as you
insert the stake to keep the mesh panels tight. Stake down each pole
strap around the perimeter of the tent. Unzip the doors to enter the
tent. Zip up the doors quickly after entry to keep bugs and insects out
of the tent.
the 2 longest of the poles go in an x over the center of the tent and the 2 shorter ones go arch to the sides. http://www.wenzelco.com/details.aspx?NavID=412 shows a picture very similar to your tent. If you go to image 2 it shows it with out the fly. now if you got 2 sets of 4 poles, 2 long and 2 short, and one set is all aluminum, then I would go with the aluminum set. It is less likely to collapse in high winds.