Question about Projection Televisions

2 Answers

Just purchased an Audiosonic KGR1 and I am unable to tune it in to my NEC TV. I have used all the codes in the manual but to no avail. The instructions state: 1. Manually turn TV on and select code for your TV from the list - did this; 2. Press the TV button one and the light will stay on - it means the TV button on the remote - did this; 3. Press and hold the channel up and volume buttons together. The TV light will go out and will flash twice and remain on - did this; 4. Enter the four digit code and the TV light will flash twice - did this heaps of times... 5. Once set up the TV light remains unlit - there seems to be a step missing here as there is no mention in how the remote 'becomes set up'. 6. If this does not work, repeat the above steps... I have searched the net with no avail. Well I am ready to throw it to kingdom come, but is there anyone out there to help me? Matt

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 25 Answers

In step 4, after typing in the 4 digit code, the tv light will flash, and if it's a valid 4 digit code, the tv light will go out after it stops flashing. You don't need to press anything after the last number of the 4 digit code.

NEC TV codes are:
1521, 1626, 1690, 1716, 1743, 1750, 1823, 1843, 1005, 1009, 1043, 1114, 1127, 1165, 1170, 1171, 1172, 1217, 1657, 1816

Posted on Jun 27, 2010

Once you have input the code and the tv light stays off, try pressing the Standby button to see if your tv responds. if not then try the next code for your brand.

Posted on Sep 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a NEC model n-3456, 14" TV. How do I use the remote to tune the tv?


Suggest you join this forum - Frank seems to be very cluey. It's an old link but if he knows how to program without the remote, I'm sure he could help you with the remote.

http://forum.eserviceinfo.com/viewtopic.php?p=70817

Mar 22, 2010 | NEC Projection Televisions

2 Answers

Lost remote need code for universal remote control.


Setting Up Your NEC TVrembar.gif
  1. Turn on your TV.
  2. On your Tune In remote, press TV and release.
  3. Press and hold Set until the green light on Tune In blinks once, pauses and then blinks twice. Now release the Set key.
  4. Enter the first three-digit TV code for your NEC from the list which follows:
    030, 056, 019
    These codes are listed in order of popularity, and the green light will blink twice if you perform this procedure correctly.
  5. Aim Tune In at your TV and press Power. Your TV should turn off. If it does not, repeat steps 2-5, trying each code listed in step 4 until you find the one that operates your TV.
Now Test Your TVWhy test? Many times more than one code appears to work. Testing is desirable to be sure you have the correct code for your TV or the other devices you are setting up.
  1. Press the Power key to turn on the TV, then press mute, channel scan ("CH") and volume ("VOL") keys. Tune channels 7 and 11 by entering the number followed by the Enter key.
  2. If your TV does not pass the test, return to Step 2 at the top of this page. Enter the next three-digit code and repeat the process.

May 11, 2009 | Projection Televisions

1 Answer

Unable to tune the channels into the tv.


send me a picture of the front panel I will tell you how.

Apr 28, 2009 | Projection Televisions

2 Answers

Unable to tune my Sky Remote to my tv


panasonic 37in can't pair sky remote with tv

Jan 09, 2009 | Projection Televisions

1 Answer

Trying to Tune local channels on a NEC TV Model #4856 using the NEC remote control # RD111OE... Can anyone help!


Hold down both the PRESET-HOLD buttons at the same time
Press again until AUTO is displayed.
Press ^Vloume to start automatic search

Dec 11, 2008 | Projection Televisions

1 Answer

How to tune NEC TV MODEL NUMBER FS5196


i have a nec cromavision if it is turned off at the power or there is a power outage it can take up to 5 hours for the tv to turn on all i get is an annoying clicking sound PLEASE help.

Aug 30, 2008 | Projection Televisions

1 Answer

I have no remote how do i tune my tv stations in with out one


check your manual , it contains all the feature..
if you dont have then try it to company website..


regards,

Aug 10, 2008 | NEC Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

860 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...