Question about Printers & Copiers

1 Answer

Have reloaded new ink cartridges. printer rollers run & then make a scraping sound & screen shows error code 5100

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 55 Answers

Hii

I can see the mark of your print please...!!
exemple :
HP LaserJet 1010 Printer series
tnx

Posted on Aug 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I fix my Canon Pixma printer? I dropped it and now it says error code 5100


It sounds like syncing the ink head position. I had a similar problem with two printers, the first one I tried everything and could not get it running right , The second one I tried the following, it worked just don't know why.

Here was my logic, if I forced the ink head to tell the system it was out of alignment it would try to self correct. So I left the black ink lock top up and started the printer the ink head try to move to the right but the open ink retainer slammed into the side stopping the head from Syncing.

Then I shut the printer down , closed the ink retainer top. Then I unloaded the software on my computer and reloaded it, my logic was that it would treat the printer as a new printer in the system and would try and sync it up - Bingo - it came on line and is working to this day.

Good Luck

May 02, 2014 | Canon MG5350 Wireless PIXMA Inkjet...

1 Answer

Error code 5100 i have turned off machine, unplugged at electrical source. After 30 min replugged in to electrical source, turned on printer. Pressed print button. Machine processes for a few minutes...


Hello and Welcome

Error 5100 means that the cartridge can not be detected by the printer.
Actually the printer is not actually loading the cartridge and showing you the error 5100.

To solve these follow the following steps. I hope it works
  1. Turn off printer
  2. Remove both the cartridges from the printer
  3. Use a clothe moistened with alcohol to clean the surface contact on the cartridges where the terminals inside the printers touches
  4. Return the cartridges
  5. Turn on the printer.
Error will be removed

Further assistance i am here to help

Please don't forget to click on Four thumbs which are given below if it is helpful
THANKS & Keep Using Fixya


Mar 11, 2011 | Canon PIXMA MX700 All-In-One InkJet...

1 Answer

Showing error code 5100


5100 is a carriage error, check the timing strip for contamination(plastic strip about 1/4" in width)
The unit is not homing, check for obstructions.

torn paper in rollers etc

Also make sure all ink cartridges are seated correctly
Please rate my help++++Thanks for using FIXYA

Nov 27, 2009 | Canon PIXMA MP470 All-in-One Printer

1 Answer

E 2 and service error 5100 on Pixma mp160 printer


You can try to clean out the printer check to see if there is any paper jammed in it somewhere
Then realighn the printer cartridges and run a test page.
Make sure that the paper tray is not overloaded

Dec 24, 2008 | Canon PIXMA MP160 All-In-One Printer

1 Answer

Error message on Canon MP160 flashing E-2-2 error message 5100


The error code refers to Ink Cartridge

Issue: ERROR: Error code 5100 appears on the computer screen
Issue: ERROR LED: E, 2, 2

1. Disconnect and reconnect power cord to reset the device
2. Remove Packing Material MP160 / MP180 / MP460
3. Reseat ink cartridge (MP160 / MP180 / MP460)

Nov 15, 2008 | Canon PIXMA MP460 All-In-One InkJet...

1 Answer

5100 error code


hi dear

this the error code
E9 The connected digital camera / video camera does not support Camera
Direct Printing
E14 The Ink cartridges whose destination are wrong
E15 Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 Failed to scan head alignment sheet
E22 Carriage error
E23 Paper feed error
E24 Purge unit error
E25 ASF(cam) sensor error
E26 Internal temperature rise error
E27 Waste ink absorber full or platen waste ink absorber full
E28 Ink cartridge temperature rise error -
E29 EEPROM error
E33 Paper feed position error
E35 15 USB Host VBUD overcurrent error - USB
E37 17 Abnormal motor driver error
E40 20 Other hardware error
E42 22 Scanner error
E2-2 No paper (ASF)
E3-3 Paper jam
E4 No ink
E5-5 The ink cartridges are not installed or a non-supported ink cartridge is installed ,
or the ink cartridges are not installed properly
E8 Waste ink absorber full, or platen waste ink absorber full




First, download the software at http://www.box.net/shared/4yblbn34kg

Secondly, to run the software your printer has to be in service mode. Do that by
- unplug cable
- press and hold "power" button
- plug cable
- press "resume" and release
- release the "power" button
At this stage, your computer will detect a new hardware

Run the software.

oke


May 22, 2008 | Canon PIXMA MP160 All-In-One InkJet...

5 Answers

Canon PIXMA MP450 "Servic Error 5100"


Try this... it worked on my MP450... Turn the printer on and open the lid, it shows the cartridges. Now let the cartridges settle to the left. You can notice that the cartridges run on a metal belt. It might be dirty, mine showed a black stripe on it. Take a cloth, a cleenex will be fine and clean it up. Move the cartridges to the right (force them with your hand) and clean the part of the belt left behind them. Now turn it off, close it up and turn it back on. It should work

Apr 02, 2008 | Canon Pixma MP450 All-In-One InkJet...

4 Answers

Canon mp180


I had this problem. Removed both ink cartridges and carefully wiped the contacts and print nozzles with a tissue. Re-inserted cartridges and printer now works perfectly.

Good Luck.

Feb 20, 2008 | Canon PIXMA MP530 All-In-One InkJet...

1 Answer

Error 5100


Have you taken the printer apart? as the issue I had with our spare printer was that the home mechanics around here had taken ours apart for some reason and had not put the paper roller pin back in correctly. it was sticking out preventing the ink tank holder from moving.

Dec 26, 2007 | Canon Pixma MP450 All-In-One InkJet...

4 Answers

Error 5100 - what does this mean?


Hi Luza, A 5100 error is a carriage problem. That means it could be the code strip, carriage assembly or logic board. First make sure nothing is keeping the print head from moving all the way across the printer. If the smallest thing blocks the head from going all the way across it will generate this error. You'll want to look hard for ANY obstructions anywhere. Throughly check the gears and rollers for obstructions too. Second the code strip (or timing strip) is the 1/4 inch plastic strip that runs across the printer and through the head carriage. It's got supports on both sides. If becomes dislodged it will generate this error. (it's got a tesnsion spring on one end) I have a feeling that is your problem. That somehow when you replaced the cartridges you may have dislodged the code strip. That might account for not being able to correctly align the print head too. Make sure it's straight, level and secure. Also make sure it's not dirty. Grease or dirt on the code strip can generate a 5100 error. You can clean it with a damp cloth (water) but be careful if your going to remove it from it's anchors. You can try cleaning the steele bar that the carriage runs across as well, but you'll have to lube it back up with a cloth dampened with some 3 in 1 oil or a light machine oil. If none of that works and your ABSOLUTLY SURE there is nothing in there blocking the printer then it must be either the carriage assembly or logic board. If either is the problem you're going to need service on the unit or a new printer. I hope this helps. Please let me know how you make out, Dude

Nov 15, 2006 | Canon Pixma iP6600D InkJet Photo Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96417 Answers

old marine
old marine

Level 3 Expert

1461 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...