Question about Phones

1 Answer

The # 1 key on my Nokia 5070 phone ( message bank) has the number 321 (speed dial) it needs to be 101 how do change it I have just recieved ths phone from new job

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 38 Answers

In the phone book options somewhere there is the speed dial settings you should be able to change it there. You may need to program the new voicemail number in the phonebook. If not look in that menu for the voicemail option there is where you change it.

Posted on Aug 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I set my speed dial numbers?


Which ones? System speed is programmed from station 10 or 11 and goes in the 6xx's, depending on your version of software. The start is FEATURE 00 FEAT 6xx and dial the number You can continue programming more numbers by pressing FEAT 6xx or Feat 00 to exit.

Personal speed dial numbers are programmed similarly, except they are in locations 80-99 on each phone and can be programmed from the phone if it's a system phone.

Auto Dial buttons use blank buttons on your set. Feature 00 pressing the button and dialing the outside number store those. Again, Feature another button will let you program another button, or Feature 00 ends programming.

Carl



Jul 12, 2011 | Lucent PARTNER18 Corded Phone

1 Answer

Cant' change Date/Time on my Panasonic KX-DT321 phone and the GuideBook is very poor


It's unlikely that the 321 is connected to extension 101 so there's not much you can do about the time from it.

Go to the 343 or 363 phone at ext 101 and press PROG and dial **1234 000. It's the time set command. Use your FWD button to get to the proper time and the ENTER command to save it.

Carl

Apr 26, 2011 | Panasonic KXDT321 Phone

1 Answer

How do you change the time on the dt 321


It depends on where the time is coming from. On a TDA/TDE/NCP system, you could have the CID set the time, then it comes from the dial tone supplier or it comes from programming the master phone. A 321 is not the control phone, so look for the phone connected to extension 101, probably the 343 or 363 set. From there, press PROGRAM and dial **1234. This should ask for a program number. Dial 000 and you're looking at the clock. Using the FWD, CONF, ENTER and NEXT buttons on the display, you can set the proper time.

If the time changes back the next morning, then you have a CID issue..

Carl

Feb 24, 2011 | Panasonic KXDT321 Phone

1 Answer

How do i change the numbers of the already programmed speed dials? The phone is a Lucent Partner 18D


If you entered them in system speed dial then you'll need to enterpgogramming on either extension 10 or 11. Enter programming by pressing feature 00,then press feature and the number of the speed dial bank (600-699), then enter in the number you want to over write. press feature 00 when finished.

If your trying to change one of the one touch buttons on the set itsself then press feature 00, press the button you want to change, then enter in the new telephone number. prsss feature 00 to exit programming.

Oct 25, 2010 | Phones

1 Answer

How do we change the phone numbers on the speed dial


Feb 27, 2010- Speed dial numbers 001 -255 (256-279 are personal speed dial entries) are system wide speed dial numbers and are changed in system programming. System programming is done on M7310,M7324 and T7316 set only.
Enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say Terminals&Sets.
The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the next key 3 times(bottom right arrow).
The display should say Sys speed dial.
Press the show key (top right arrow)
The display should say speed dial#:--
enter in the speed dial number you wish to program.
Press the show key (top right arrow) .
The display should show the existing speed dial number
Press the chg key
Enter in new telephone number
press ok when finished
repeat for remaining speed dials
Press the release key when finished

Apr 16, 2010 | Nortel T7316E 2-Line Corded Phone

1 Answer

Changing all speed dial numbers


Speed dials reside in programming memory 001. You can change them from the maintenance console software, or an extension, usually on Jack #1, operator, or the manager's phone.

From the phone, (ext 101) press PROGRAM and dial **1234. If the display says SYS PGM then dial 001 and start with your first speed dial number (3 digit, 001-999). By stepping through the ENTER key, you will be able to find the existing numbers. A trunk access code must be the first part of a speed dial number. You probably see it as the first digit "9" in front of all your numbers.

Carl

Apr 10, 2010 | Panasonic KX-T7630 Corded Phone

1 Answer

Have a lucent partner 18D system How do I change


If your changing the speed dial numbers under the individual buttons thats done by pressing feature 00, the button you want to change the speed dial number on, and enter in the new number.
If your changing the system wide speed dial numbers, From extension 10 enter in feature 00, press feature then the 3 digit code for the speed dial bank (600-699), then enter in the new telephone number. Either press feature and the next 3 digit code for the next number or press feature 00 if finished.

Jan 25, 2010 | Phones

1 Answer

INSTRUCTIONS NEEDED ON HOW TO SET UP SPEED DIAL NUMBERS FOR WHOLE OFFICE SYSTEM


Speed dial numbers 001 -255 (01- 70 on older versions) are system wide speed dial numbers and are changed in system programming. System programming is done on M7310,M7324 and T7316 set only.
Enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say Terminals&Sets.
The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the next key 3 times(bottom right arrow).
The display should say Sys speed dial.
Press the show key (top right arrow)
The display should say speed dial#:--
enter in the speed dial number you wish to program(40-70) .
Press the show key (top right arrow) .
The display should show the existing speed dial number
Press the chg key
Enter in new telephone number
press ok when finished
repeat for remaining speed dials
Press the release key when finished

Jan 08, 2010 | NorStar T7316E Corded Phone

1 Answer

How do I change the speed dial outgoing number??


For personal speed dial numbers press feature *4 , enter in speed dial bank number 71-94 (256-279, it changes with different versions), enter number, press ok
- speed dial numbers 01- 70 are system wide speed dial numbers and are changed in system programming2.gif.System programming is done on M7310,M7324 and T7316 set only.
Enter programming2.gif by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say Terminals&Sets.
The 4 top line/feature keys are now used for programming2.gif.
At the terminals&sets prompt, press the next key 3 times(bottom right arrow).
The display should say Sys speed dial.
Press the show key (top right arrow)
The display should say speed dial#:--
enter in the speed dial number you wish to program(40-70) .
Press the show key (top right arrow) .
The display should show the existing speed dial number
Press the chg key
Enter in new telephone number
press ok when finished
repeat for remaining speed dials
Press the release key when finished

Oct 14, 2009 | NorStar M7310 Corded Phone

1 Answer

Programming Auto Dial Number


Yep. Those are speed dial numbers. They are programmed from ext 101 or the main phone. Without picking up the handset, press PROG **1234 and dial 001 and ENTER. Dial your 3 digit speed dial number If there is something there, it will be displayed. A speed dial number is stored with the trunk access code in it (usually 9) so if you're putting in a new number, include the "9" plus the number exactly the way you dial it. Dial your new number with the access code and press ENTER.

Number changed :-)
You can keep putting in a whole boatload of new numbers with this procedure.

Carl


Mar 16, 2009 | Panasonic KX-T7633 Corded Phone

Not finding what you are looking for?
Phones Logo

Related Topics:

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top Phones Experts

kakima

Level 3 Expert

96372 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4753 Answers

Are you a Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...