Need to reset lamp timer on 61" - Televison & Video

e_rodriquez1,

Here is a link to my tip which explains the process to reset the lamp timer http://www.fixya.com/support/r6593210-procedure_reset_panasonic_tvs .

Thanks for useing FixYa and for the great rating.

hardrocko

according to the owners manual you need to go into setup in the main menu and scroll down to timers or lamp reset then hit the rest button

Scroll down the menu till you see "Lamp Reset " press Enter and your done..

Look in the manual under "resetting the lamp timer"
This must be done with most any replacement

Browse to:
http://www.retrevo.com/r/391dj496/48/Lamp+Timer+Reset#q=JVC+HD-61G787
On that page is the (lower) is the exact procedure on resetting the lamp timer. You can also down the entire manual in PDF format.


Cheers

To reset the lamp timer, turn the TV on first. Now hold VOL DOWN on the TV and MUTE on the remote until a message appears on the screen about the lamp timer being reset. Make sure the remote is pointed toward the TV to receive the signal.

Google the exact model number and you should find the information on the internet for free.

There is a service reset "button" located on the input panel on the bottom of the projector. This should be what you are looking for you can also download the manual at this link.
http://www.runco.com/legacy_prods/legacy_manuals/VX-5000ci-DHD_6-07-04_v2.pdf
If you need further assistance please let me know. Also please take a moment to accept and rate my solution accordingly.
Thank you,
Lee

Turn on the tv. On the tv itself, push and hold the volume down button. Then on the remote, where it has split/swap button, press and hold the swap (down) button while pointing remote at tv.

hth

Hold the volume down button on the tv until the volume is at min. then continue to depress the volume down button on the TV. While depressing the volume down button the tv hold the pip or split button on your remote for approx 5 sec. You will see a box pop up that says lamp timer reset and gives instruction on how to exit.

The file is too large to post here but if you post your email address, I can send you the step by step instructions to replace the lamp and reset the lamp hour counter.