When I turn on the camera, I get a message that reads "Memory Full". I push the buttons specified in the online manual and nothing happens. In fact, nothing happens when I push any of the buttons - even if I turn the camera off and back on again.

Memory full, if it is true, you should backup some pictures and delete them from the card.
Read error, can indicate a corrupted file, dirty contacts on the memory card or a camera malfunction.
for 1 backup all photos and format the card. 2. Clean the contacts on the card and in the camera.
3. Contact a FUJI dealer.
Everything is in the manual (still online) on page 112

You can either delete some pictures from memory or, on most Kodak cameras, insert a memory card.

If you need further assistance, please reply to this message and specify the model of your Kodak EasyShare camera.

in camera memory is alredy full but u say only memory card formaat pls look the camera memory and no answer that the card is full

there maybe something wrong with your camer memory card.

I bought a at a yard sale and had the same problem.

Hi there make sure now your default storage place is external memory card. if it is then go in setting and format the card. Then restart the phone and see the result.

Mine worked w a different sd card.

i have the same problem

Choose YES for the Format option. Allow it to finish. Should work fine then.
Possible defective card if does not work after full format. Do not use any "quick format" option.
First time must be FULL format.

If your brother Intelli Fax 775 says..Memory full, erase message...this is what you do. Press "menu 84" then press the fax start button. Your fax will print every fax in memory and it will clear itself. To turn off the memory so this does not happen again..Press Menu then 82, then a up or down button, so it reads "off". Then the stop/exit button, and your done.