Question about Whirlpool LSR7333 Top Load Washer

1 Answer

WASHER FILLS WITH WATER, THEN WON'T AGITATE. TURN KNOB TO SPIN AND IT DRAINS THEN SPINS. STILL WON'T AGITATE

Posted by on

  • Anonymous Mar 17, 2014

    agitator won't spin

  • Anonymous Mar 31, 2014

    Roper washer won't spin or drain but will agitate

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

WASHER FILLS WITH WATER, THEN WON'T AGITATE. TURN KNOB TO SPIN AND IT DRAINS THEN SPINS. STILL WON'T AGITATE please show me a diagram

Posted on Jul 23, 2011

  • Lumy Iv
    Lumy Iv Jul 10, 2012

    What is the solution, I have the exact same trouble

  • Paolo Benamir Sep 25, 2013

    same as here, unit won't agitate. drain and water fill are ok.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My washing machine will'nt wash and little water come out to fill it


Washing Machine Will Not Agitate or Spin - Home Repair ...

? 15:00
www.youtube.com/watch?v=wUSmUSWWIS4
Oct 20, 2013 - Uploaded by Robert DIY This washing machine would not agitate or spin. There is a ...My washer also is not agitating or spinning but water will drain after a long while.

Troubleshooting Why the Washer Won't Agitate ' PartSelect ...

? 3:10
www.youtube.com/watch?v=LfWRyt1vj2w

Nov 5, 2012 - Uploaded by PartSelect
The only wash cycle that works is delicate none of the other washcycles work .... The washer still fills, drains and spins to dry butwill not agitate. ... Hi My machine wont spin or agitate on heavy loads like a few towels etc (fine


Nov 02, 2015 | Washing Machines

1 Answer

Figidaire FTF630as0 won't agitate. The door locks and water drains but won't agitate or spin


Hello Tina Kaha - Often when a unit does not spin, it is because the unit cannot properly drain and dispose of the water and detergent solution. Does the unit make a humming noise? If so, the drainage hose/pump may be clogged and needs to be cleaned. If not, the washer may possibly be experiencing an issue with the door lock assembly, faulty pump, timer or control board not communicating correctly. Because it could be a number of any one of several underlying causes, I would recommend contacting a professional to properly diagnose and repair the unit.

Apr 19, 2013 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Gf1001l0ww fills spins and drains won't agitate


Check the drive to the drum and check the paddle.
It is possible also that there is no output to the motor for the wash cycle and if so the control panel board is a suspect.

Jan 25, 2013 | Washing Machines

1 Answer

My roper top load washer model rtw4440vq fills with water but wont wash, spin or drain


see this causes and fix it. God bless you
Motor Coupling If the washer won't spin or agitate the motor coupling might have failed. The motor coupling connects the motor to the washer transmission. It is designed to fail if the washer is overloaded in order to protect both the motor and
Drive Belt If the washer won't spin or agitate, check the drive belt. If the belt is broken or if it isn't tight on the pulleys the washer won't spin or agitate properly.

Drive Motor If the washer won't spin or agitate the drive motor might be defective. This is not common. Check all of the other related parts to this symptom before replacing the motor. If the motor is visibly burned out or physically damaged, replace it.

Stator Assembly If the washer won't spin or agitate the stator assembly might be burned out. The stator is essentially one half of a motor, it interacts with the tub by creating a strong electro-magnet. If the stator burns out the washer won't spin or agitate. Check the stator for continuity. This part is often misdiagnosed.

Door or Lid Latch Assembly If the washer won't spin or agitate the lid switch assembly might be defective. This is a very common problem. The lid switch assembly can fail either mechanically or electrically. Test any electrical switches with an Ohm meter for continuity. The switches should have continuity according to their design.

Door Lock Motor and Switch Assembly If the washer won't spin or agitate the door lock assembly should be checked. The door lock can fail either mechanically or electrically. Test any switches on the door lock with an Ohm meter. The switches should have continuity according to their design.

Motor Control Board If the washer won't spin or agitate the motor control board might be defective. The motor control board provides power to the motor as well as direction and force. If the motor control board is defective the washer may not work at all or function properly.

9_30_2012_11_01_26_pm.gif

Sep 30, 2012 | Roper Washing Machines

1 Answer

Maytag Washer won't agitate after filling


Believe you are on right track would try door lock switch first easier to replace and most likely cause.

Aug 04, 2017 | Maytag Centennial 3.2 cu. ft. SuperSize...

1 Answer

Won't spin fills and drains water if i manually turn dial


Direct drive or belt drive? If belt drive then thats easy, motor belt or pulley. Direct drive? motor, ,,, maybe.

Jan 11, 2012 | Frigidaire GLTF1240A Front Load Washer

1 Answer

Kenmore washer 90 series - 1/2 hour ago we replaced the coupler and clutch because it would not spin. Now, it spins great - if you manually set the knob to spin! It will not move through the cylcles...


the first thing to check is if the small appx. 3/8" diameter clearish rubber hose got disattached from the side of the outer tub espically if before replacing cluctch is didnt overflow

Aug 12, 2011 | Kenmore Washing Machines

2 Answers

FILLS WTANK WITH WATER AND DRAINS BUT DOES NOT AGITATE NOR SPINS


Hi. your timer assembly is faulty. it is not initiating the spin and proper wash cycle due to this malfunction. the timer is responsible for the actions and commands. if its defective, it will not carry out the initiations correctly.

CLICK HERE TO BE DIRECTED TO THE PURCHASE PAGE FOR YOU REPLACEMENT TIMER.

May 23, 2009 | Washing Machines

2 Answers

GE profile washing machine won't agitate it spins out, drains,


Pull the agitator out and check the drive collar splines.If you have the model I think you have just pull straight up on the agitator. Once removed you will see the drive collar with a 7/16 head bolt,remove it and pull off the collar.First before pulling it off spin it if splines are stripped it will spin freely.

Mar 25, 2009 | GE Profile WPRE6100G Top Load Washer

Not finding what you are looking for?
Whirlpool LSR7333 Top Load Washer Logo

6,182 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Sal De

Level 3 Expert

2699 Answers

Marvin
Marvin

Level 3 Expert

84625 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1479 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...