Question about Sony PC Desktops

2 Answers

Computer keeps restarting in safe mode, and will recovery, or after recovery screen come-up, start computer in safe mode or start windows normally, when choosing one computer restarts the process over

Posted by on

  • Anonymous Mar 26, 2014

    Yesterday I was using the computer with no problems. Today I turn on the system, go to desktop mode and the screen keeps resetting. What can I do to fix?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

IT CAN BE
OVERHEATING
1: CPU
2: NO FAN IN SIDE THE SYSTEM
3: POWER SUPPLY RUNNING TO HOT
4: HARD DRIVE FAILURE - the smart feature would cause the hard drive to reboot and if the power supply had been running hot sounds like it might have been hit by a surge

Posted on Aug 20, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 42 Answers

This might be caused by the adware /spyware or any tro.. virus. pl check the sys32 folder in safe mode. and go to msconfig ->startup tab and disable all and reinstall the sys. sys will be bootedup. if fails then reinstall the OS.

Posted on Aug 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where do i change my emachine password at?


EMachines is a brand of entry-level, affordable computers now owned by Acer.
The computers come with the Windows operating system.
To keep your computer secure, it is a smart idea to continually reset and change your password. Changing the password will take only a moment.
Log in to your user account.
Press "Ctrl" plus "Alt" plus "Delete" simultaneously.
Click "Change Password" from the list of options.
Enter your old password.
Enter your new password twice to confirm.
Press "Enter" to save the changes.

Reset An eMachine
eMachines manufacturers a series of netbooks, desktops and laptop computers.
Certain applications and circumstances will require you to reset your computer.
Resetting your eMachine computer is a quick process that can be used to fix problems, complete program installations and access the BIOS or other Windows tools, such as Safe Mode.

Click "Start" in the Windows taskbar.
Click "Shut Down."
Click "Restart."
Normal Restart for Windows Vista/7
Click the "Start" orb in the Windows taskbar.
Click the arrow next to "Shut Down."
Click "Restart."

Change your Windows password
http://windows.microsoft.com/en-US/windows-vista/Change-your-Windows-password

or
Restart your computer repeatedly tapping the f8 key to enter safe mode while the screen is black once in safe mode where the only things working will be your keyboard and mouse allowing you to attempt to repair your computer
Windows Advanced Options Menu
Please select an option:
Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt
Enable Boot Logging
Enable VGA mode
Last Known Good Configuration (your most recent settings that worked)
Directory Services Restore Mode (Windows domain controllers only)
Debugging Mode
Start Windows Normally
Reboot
Return to OS Choices Menu
Use the up and down arrow keys to move the highlight to your choice
select safe mode with command prompt
Click start run type cmd press Enter
black screen should open DOS mode
this will vary depending on your operating system
type in net user username
For eg. If you want to change administrator password , type net user Administrator
It will prompt you to enter the new password.
Enter the new password and the password is changed
http://wiki.ljackson.us/Control_Userpasswords2
if this fails you will need to
Select safe mode with networking to download
you could download all of these or just one save them to a usb drive for later use if one fails to remove the password
Windows Password Recovery Basic
http://majorgeeks.com/CmosPwd_d239.html
A CMOS BIOS password recovery tool
Editors note: This tool should only be used by experienced computer users.
Please see the enclosed read me if you would like to run it from Windows.
Failure to follow instructions (from Windows) will cause your anti-virus to flag this as a virus.

May 05, 2013 | PC Desktops

Tip

How to Turn Off Safe Mode on Windows Vista


The Safe Mode is used to detect the technical and software problems in windows Vista. This is an effecting way to diagnosing the problem, that's why most of the technicians prefer this way to resolve the problem. But Safe Mode disables the most of the advance functionality of your computer. So use the Safe Mode only for diagnosing the problem and as you diagnose and repair the problem get back your windows to normal mode. <br /><br />For reverting back to normal mode at windows Vista, an option occurred which has to be select within limited time and if you select the Normal Mode option within this limited time, your windows will revert back successfully but if you waste the time, you have to restart your computer again for getting this option. You can select the Normal Mode option through arrow keys or by pressing the number at which the Normal Mode will appear.<br /><br />Sometime your computer does not display the Mode Selection Menu. This is not a problem you can get this menu and revert back your windows Vista into Normal Mode through the following instructions.<br /><br />Instructions<br />If you want to revert your Windows Vista into Normal Mode from the Safe mode but your system is not giving you option to select the mode, follow the given instructions: <br /><br />Restart Your Computer: To restart the computer you need to take the following step:<br />- Click on "Start" button at the left side of Task Bar. In Safe Mode of windows Vista the Start button appears at the same place where it appears in the Normal mode. Select "Turn Off Computer" from the Start Menu. Then, Select 'Restart" from the pop-up menu.<br />When your computer has been shut down place your finger at F8 key. As your computer starts to boot computer devices for restarting your computer, press F8 key again and again unless a menu appears on the screen. This menu is Mode Selection Menu.<br /><br />Note: If your computer won't give you Mode Selection Menu at the screen that's means you have lost the time of getting option. In this condition restart your computer again and again, and then press F8. <br /><br />When you get Mode Selection Menu on your computer screen, stop pressing F8 key. Now choose the Normal Mode from the list by the following method:<br />- You can select the Normal Mode by pressing the number on which Normal Mode appears in the list.<br />- You can select the Normal Mode manually through the Arrow Keys. Press the down key to reach at the Normal Mode option in the list and press Enter. <br /><br />Then wait for a while to reboot your Windows Vista in Normal Mode. <br />This is the method of changing Mode in windows Vista. You can follow these instructions at any time to revert your windows Mode.

on Jun 24, 2011 | PC Desktops

1 Answer

Restore my emachines w3507 back to factory settings how do i do it


Restart your computer repeatedly tapping the f8 key to enter safe mode while the screen is black once in safe mode where the only things working will be your keyboard and mouse allowing you to attempt to repair your computer
If done properly the user should get to a screen similar to the below screen. Select the option for Safe mode command prompt only Windows Advanced Options Menu
Please select an option: Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt Enable Boot Logging
Enable VGA mode
Last Known Good Configuration (your most recent settings that worked)
Directory Services Restore Mode (Windows domain controllers only)
Debugging Mode Start Windows Normally
Reboot
Return to OS Choices Menu Use the up and down arrow keys to move the highlight to your choice. To perform a system restore, follow these steps: 1.Click Start, click Run, type msconfig, and then click OK. 2.On the General tab, click Launch System Restore. 3.Select Restore my computer to an earlier time, and then click Next. 4.Calendar dates in bold are possible restore points. Click the most recent one to view system restore information. 5.Select a system checkpoint or an installation restore point, and then click Next. 6.Close all other programs. 7.To start the system restore, click Next. 8.Your computer restarts. Repeat steps 1 through 8 until you fix your configuration issue.
or

It is possible for the Windows operating system on your eMachines computer to have a critical failure. If the operating system on your eMachines computer is failing, you can use your recovery discs to restore your computer. Recovery discs come with your purchase of an eMachine, and contain your operating system and all your basic drivers. You can recover your eMachines W series in about an hour.

Turn off your computer and press "F8" to enter the BIOS menu. Tab over to the "Boot Sequence" or "Boot Order" menu. Move your optical drive to the top of the list. Press "F11" to exit and save changes. Insert your recovery disc into your optical drive, then restart your computer. Press any key to boot from disc. Select the "Full Recovery" option from your recovery disc menu. Allow the recovery procedure to complete. Hope this helps.

Dec 28, 2012 | eMachines W3507 PC Desktop

2 Answers

Hp Vectra 6VL will only start in safe mode


Run the computer in safe mode and then go and shut down unnecessary startup programs, then restart the PC.

Dec 23, 2012 | HP Vectra VL420 PC Desktop

3 Answers

How do you put windows into safe mode?


Power on or Restart your computer, keep tapping F8 on the keyboard while it boots up. After few seconds, you'll be taken to the "Advanced Boot Options" with "Safe Mode" in the lists. Use the Up-Down arrow keys to highlight the "Safe Mode" and press enter on the keyboard to confirm the selected boot options. Black Screen with white texts will be displayed on the display, wait for few seconds until you see the windows logon Screen. You'll also see a confirmation message box asking you to confirm to boot into Safe Mode, click "yes" or "Ok" and proceed forward. There now you are in the Safe Mode.

If you need further help, let me know.

Good luck.

Thanks for using FixYa.

Sep 26, 2010 | PC Desktops

1 Answer

My xps i don't come on when you boot up the CD light comes on for a second and then all I get is a black screen


When you boot up hold down the F8 button on your keyboard until you see start up options then click on start up repair
  • Startup Repair is a Windows recovery tool that can fix certain problems, such as missing or damaged system files, that might prevent Windows from starting. Startup Repair is located on the System Recovery Options menu, which is on the Windows Vista installation disc. If your computer has preinstalled recovery options, it might also be stored on your computer's hard disk. For more information, see Startup Repair: frequently asked questions and What are the system recovery options in Windows Vista? If your computer does not include Startup Repair, your computer manufacturer might have customized or replaced the tool. Check the information that came with your computer or go to the manufacturer's website.
  • Change restart settings in safe mode. If your computer is stuck in a loop where Windows fails, attempts to restart, and then fails again repeatedly, restart your computer in safe mode and select the Disable automatic restart on system failure checkbox. For more information, see Advanced startup options (including safe mode).
  • Reinstall. If no other options have solved the problem, and you are sure that your computer's hardware is functioning normally, you might need to reinstall Windows. A custom (clean) installation of Windows will permanently delete all of the files on your computer and reinstall Windows, so only use this option if all other recovery options have been unsuccessful. After the installation, you will need to reinstall your programs and restore your files from backup copies. For more information, see Installing and reinstalling Windows‌.

Jul 30, 2009 | Dell XPS One All-in-One TV Desktop with...

1 Answer

Computer will not start past safe mode screen


In safe mode, hit start button -run, and type "msconfig" in the box , hit enter.
the system configuration utility opens.
select startup tab at the top
when the startup screen opens, UNcheck all the boxes, press APPLY, then OK
the computer will prompt you to restart, when it restarts it will give you a message saying you have use the system configuration utility to change the way windows starts, this is normal. Check the box that say dont show this again and click OK.
doing this will keep the programs set to start when windows starts from starting untill you start them manually. If one of them is causing the freeze, this will make the system accessible.
Keep in mind, you may want to turn some of them back on after you get the computer going and when you do , turn them on one at a time and restart the computer after each change. this way you can identify which program is causing the problem.
Hope this helps. please repost if you have more questions

Oct 08, 2008 | Sony VAIO PCV-V210P PC Desktop

1 Answer

My toshiba satellite a105-s171 will not boot up. it acts like it is starting but after the windows xp screen a blue screen flashes with white lettering but does not stay long enough to read and then the...


You need to do a recovery using the recovery console. There is an option during startup, if you are running XP or later, to press F11 for emergency recovery.

Press F11 and choose the option to recover and backup.

This will backup all files and programs currently installed on your computer.

After the recovery process finishes, you will have to go through the process of setting up your computer, like you did when you first bought it.

After you are all setup again, it is a good idea to create recovery disks under the 'Start' menu, 'Recovery' option.

Apr 12, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

508 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you a Sony PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...