Question about Canon SELPHY DS810 InkJet Photo Printer
Plz fix my problem error 5100
Yep this---As a technician, I have worked on tons of printers. This particular error had stumped me for a while, but I finally found the cause. As others had pointed out before, it can have alot to do with some obstruction in the print path, the gears, or ink on the clear plastic encoder strip. You're on the right track - I found the the purge cap (the white sliding mechanism that the print head parks to when it's not in use) was not lubricated well enough from factory. If you lubricate the sliders with some white grease (don't get it on the small wipers or the black caps) the mechanism can now slide more freely, and the unit can park the head properly without giving you the dreaded head homing error 5100 (or E-2-2 on the LCD display) Keep in mind that this repair will probably require you to remove the right panel off of the printer to gain access to the purge mechanism. There are two screws behind the printer, and two in front for each corrosponding side panel (the front screws are behind the grey front panel of the printer - open the top cover to see the clips which hold the front cover on) Hope this helps some of you out.
Posted on Mar 09, 2009
Tips for a great answer:
Jan 05, 2016 | Canon PIXMA MX340 Wireless Office...
Oct 19, 2012 | Canon LASER SHOT LBP-2900 Printer
Nov 28, 2010 | Printers & Copiers
Nov 14, 2009 | Canon PIXMA MP470 All-in-One Printer
Aug 26, 2009 | Canon PIXMA MP160 All-In-One InkJet...
221 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: