Question about Heating & Cooling
Locate and touch the cooils located, usually, above the condensate collection pan, ("pail empty"). If the coils are not cold, or cool to the touch, the unit has lost its charge of refrigerant. This would explain why the unit fan is working, but there is no condensate, as there is no coolant (charge) to cool the coils and "pull" the hunidityout of the air.
Posted on Jul 08, 2008
I contacted the Danby Co. and found out the unit was still under warranty. They gave me the name of a local repair shop who replaced the float sensor "free of charge".
Thank you for your time and interest. If I have another problem later I will be in touch with you.
Posted on Jul 03, 2008
It sounds like a refrigeration problem might be a leak in the system or the compressor isnt coming on either way its cheaper to replace the dehumidifier. Hope this helps out dehumidifiers are very disposable.
Posted on May 10, 2011
Ty Googling (Simplicity)(43-5401-4m)(manual) without parens.
Posted on Aug 18, 2016
Tips for a great answer:
Aug 06, 2011 | Heating & Cooling
Jul 21, 2011 | Whirlpool ACQ128 Air Conditioner
Jul 01, 2011 | Heating & Cooling
May 17, 2011 | Heating & Cooling
May 10, 2011 | Heating & Cooling
Here is a tip that I wrote to help people to figure out what is going wrong with their dehumidifier
Dehumidifier is running but no water is in bucket
Nov 16, 2010 | Whirlpool Heating & Cooling
Sep 02, 2010 | Heating & Cooling
Jul 16, 2010 | Heating & Cooling
Jun 28, 2009 | Danby DPAC12031 Air Conditioner
Jul 02, 2008 | Danby Heating & Cooling
651 people viewed this question
Usually answered in minutes!