Tri colour ink catridge error - Office Equipment & Supplies

try and clean the catridge contacts on the printer,check and clean the ink cradle,finally replace the cradle

If you are using compatible ink cartridge then the problem is that they are compatible with your printer try to use original ones or try an other compatible ink manufacture

Good Luck

no it is not necessary to coloured catridge .but the two spots should be filled with an empty or new catridge. if this is not woking open the catridges and check

hi,

As you dont want to use the colour ink,When you give the print command you wil get the print properties page ,In that you can select black and white so that you wil not use up the colour catridge. It uses black catridge only.

thanx

you need hp 22 and not hp 57
you can still refill the old one

check here how

Your black ink has finished, try and get a new black ink catridge, remove the black ink to get the no on the catridge. good luck

No
some model hp deskjet all in one used duel cartrdge because it is a color popier

Take out both the catridges from the Printer......... Take 2 Paper Towels one should be wet with Luke warm water and the other one should be dry........... Take the Colour catridge first turn it upside down and u will see a small copper plate on the catridge from where the ink comes out....... Place the wet paper towel using ur thumb on the Copper plate and press it a lit bit for 10 Seconds...... Now remove it and see whether u see any ink on the paper towel.......... U should see some ink on it now place the dry paper towel on the ink catridge in the same way........ Now do the same procedure again.......... Do the same procedure twice on the Black Catridge................. Now take the dry paper towel and turn the direction of the cartridge so that u can see a Copper plate on it with small boxes just clean that copper plate with the Dry Paper Towel.......... Know insert both the catridges inside the Printer.
Good Luck :)

hi! there, well in connection to your poor printed color there posibility that ink was insufficient to distribute to you photo to print try to visit your ink status, black color is sepated to 3 color catridge.if there's a insufficient ink in catridge,replace or refill any thing as long there is much ink in your catridge,if ok and print still not good,try to clean your printer headdont use any thing to clean your printer herad,the printer will clean your printer head,on maitenance menu,click clean,try several time,also try to align your printer head,click aligned,t check the pattern of your printer,click pattern test.if ok try toprint if the color print is balance,try to print.check the preview before you print adjust the quality color as in yout tate before printing.regards and have a nice day.

try install catridge one by one see whether it is accepting or not. just install black catridge and see if you not getting any error that mean your balck catridge is ok may be problem with colour catridge it may me becoz of dry ink or dust in catridge nozle try to clean the catridge by tissue paper and see. bye