Question about NorStar M7310 Corded Phone

2 Answers

Answering call I used to be able to answer the line that is ringing by simply picking up the receiver. Now I must push the line # to answer that line. How can I re-program the phone. It is only one phone out of 5 with this problem. Jim

Posted by on

  • 1 more comment 
  • Anonymous Oct 06, 2008

    Myne does the same thing. It also does not ring when there is an incoming call!

  • lfournier Jan 07, 2009

    Did anyone find a solution????? I have the same problem and it isn't in ANY manual!

  • David Sonnier Apr 02, 2009

    It doesn't say it in the manual!

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Feature ** 266344 password 266344 (assuming the default passwords are set)
A. Configuration
2. Line Access
Show set (enter the telephone extension set number that needs to be changed) ex 34
Then press enter 4 times until you see the 'Prime Line'
Press the change button to set the desired line that will activate when the handset is picked up.
(It will probably display 'None' at present before change)
Press enter and release.

Posted on Apr 11, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 166 Answers

Hopefully the user manual can help you

Right here

http://www142.nortelnetworks.com/bvdoc/norstarbcm/m7310-2.pdf

Posted on Aug 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why can't I answer a call on line 2?


Confirm the extension # you are working with and that the line 2 key is line 2. do this by pressing feature *0 and the pressing the intercom key, observe the display and then press line 2 key and view display. then go back in the programming and view line 2 apear&ring, change it until it is apear&ring, then release and check for working again. If this dont work check to see if line 2 is programmed as a private line.

Jun 17, 2015 | NorStar T7316E Corded Phone

1 Answer

Hooking up fax to KX TG7871 Panasonic Phone


There is excellent support here on basic fax setups. You have what is known as "Distinctive Ringing Service". There are pros and cons to the various setups. I assume you recognize the rings and answer only when the ring for the landline talk comes on. The fax will pick up the faxes, and the answering machine will pick up the voice.

Need model number of your fax - google that!

Service manual for your phone.

http://service.us.panasonic.com/OPERMANPDF/KXTG7841-MUL.PDF
This link shows various configurations of setting up your phone/fax/answering machine or using an answering service.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00059780#Dist_ring
Distinctive Ringing Service setup While it is not available everywhere, a distinctive ringing service can be purchased from most telephone companies. With this service, more than one phone number is assigned to the same phone line. Each phone number will ring differently. The main number will ring with a normal single ring and the additional number will ring with a distinctive ring pattern assigned by the phone company.
When a distinctive ringing service is used, set the Rings to Answer to 2 and then follow the steps below to set the distinctive ringing pattern:
  1. Press Setup , press 4 , and then press 1 to enter the Answer Ring Pattern setup of the Advanced Fax settings.
  2. Use the Right Arrow to scroll through the available settings. When the ring pattern assigned by the phone company displays (double or triple rings), press OK .

Mar 06, 2014 | Phones

1 Answer

How can I get the dial tone turned back on without lifting receiver? I want to be able to lift the phone and answer without pushing Line 1


To answer a ringing line by just lifting the handset that phone has to be programmed to ring on that line. This is done in the programming mode under 'terminals&sets/show set__/Line Access/Line assignment/Show line:__/...then your choices are: Appear and ring,Appear only, or Unassigned. Choose appear and ring on each line you want to answer from that telephone. Hope this helps.

Bill C. www.dyna-tech.com We also do remote programming and tech support on Norstar CICS and MICS.

Apr 09, 2010 | NorStar M7310 Corded Phone

1 Answer

Answerphone Question


Push Menu, Scroll to Initial Setting and push Select, go to Set Answering and push select, go to Ring Count and push select, you should be able to scroll up or down to the number of rings, in your case 6, and then push save

Mar 12, 2009 | Panasonic GigaRange KX-TG5432 Cordless...

1 Answer

Answering incoming calls


I am a Vidavi certified tech. Give me a ring

Dec 23, 2008 | Vodavi Starplus DHS 7312 Enhanced Phone

1 Answer

Can't answer direct line calls


This sounds like a programming issue on this telephone. There are 2 areas in programming that would cause this. If you have recently had a technician out to do some programming then it is possible that he made a mistake and needs to be called back to correct his mistake.

Nov 12, 2008 | NEC Electra Elite DTU 16D-2 Corded Phone

2 Answers

MY PHONE SAYS "MAKE BUSY" ON MY LINE. IT WILL NOT FWD TO VM/ ONLY BUSY!!


I was given a set of codes to use to reset the "make busy" sign, which was **1, not sure if these codes pertain to all phones, and to turn off "head set" i was told to use **3. I was then able to see the date and time again!! I also was able to pick up my phone when it rings instead of having to press a certain ext to answer from.
Good luck!

Nov 03, 2008 | Mitel Superset 4025 Corded Phone...

2 Answers

Receiver dosen't pick up line that is ringing


go to programming section 5
You want Automatic Line Selection

Press feature00
left intercom button press twice (system program)
press right intercom once (central tel program)
enter # of extension to be programmed (intercom #)
press **
press line buttons in desired order line1 line 2 etc and
end with left intercom then press**
enter feature 00 to exit programming
Dave

Aug 26, 2008 | Avaya Corded Phone avaparp18d

Not finding what you are looking for?
NorStar M7310 Corded Phone Logo

Related Topics:

491 people viewed this question

Ask a Question

Usually answered in minutes!

Top NorStar Phones Experts

kakima

Level 3 Expert

96518 Answers

dan4261

Level 1 Expert

14 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Are you a NorStar Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...