Question about Electrical Supplies

2 Answers

Simoniz s1900 electric power washer with no water pressure

Hi: I have a Simoniz electric washer that worked well for about 3 months and then all of a sudden lost pressure . The unit still starts and sounds the same but upon squeezing the trigger of the gun all that comes out is standard hose pressure ( say about 40 psi) . I called Simoniz and they determined the fix as being a faulty fitting where the garden hose connects to the machine. They mailed this out to me last week but i have yet to receive. I'm just doing a little proactive research as i can't see that part as being the woes to this machines problem.

Is anyone familiar with this problem , i'm reading about alot of issues with these Simoniz power washers.

Thanks

Dave

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

What a jacka$$ response.
Do you think its the seals? wow that describes f**Kall!!!

Posted on Sep 03, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 154 Answers

If your only getting 40 psi the seals on the pump need replacing

Posted on Jun 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Simoniz S1900 pressure washer "pulses" on and off when I turn it on and pull the trigger. I have purged the pump of air as pre the company's video but nothing helps.


One thing to check is that the hose connected to it isn't collapsing and cutting off the water supply. Make sure plenty of water pressure and volume at hose as well.

May 23, 2011 | Vacuums

1 Answer

No high pressure water


I have a SIMONIZ S2000 electric. I bought the unit about 8 weeks ago used it once. On the second use yesterday the unit didn't work as well, the pressure seemed only a bit better than hose pressure and soap did not dispense at any pressure. SO.... after much thought I turned the hose/tap pressure down so that I only got about 2-3 GPM instead of the typical 5-6GPM normally coming out of my hose....... it worked! Soap dispenses and spay is way better! It seems that if if the inlet hose pressure is high the pump doesn't work as well... go figure.

Jul 01, 2010 | Karcher 1550PSI Pressure Washer

1 Answer

Solutions won't feed from bottles on machine? I use the switch on this machine to use a deck cleaning solution and the bottles won't feed the solution into the water.


I have a SIMONIZ S2000 electric. I bought the unit about 8 weeks ago used it once. On the second use yesterday the unit didn't work as well, the pressure seemed only a bit better than hose pressure and soap did not dispense at any pressure. SO.... after much thought I turned the hose/tap pressure down so that I only got about 2-3 GPM instead of the typical 5-6GPM normally coming out of my hose....... it worked! Soap dispenses and spay is way better! It seems that if if the inlet hose pressure is high the pump doesn't work as well... go figure.

Jun 25, 2010 | Campbell Hausfeld 1800 PSI Electric...

1 Answer

Pressur not costant


I have a SIMONIZ S2000 electric. I bought the unit about 8 weeks ago used it once. On the second use yesterday the unit didn't work as well, the pressure seemed only a bit better than hose pressure and soap did not dispense at any pressure. SO.... after much thought I turned the hose/tap pressure down so that I only got about 2-3 GPM instead of the typical 5-6GPM normally coming out of my hose....... it worked! Soap dispenses and spay is way better! It seems that if if the inlet hose pressure is high the pump doesn't work as well... go figure.

Jun 21, 2010 | Karcher K2.26 Electric Power Washer

2 Answers

I would like to take apart my Simoniz pressure Washer


I have simoniz 1750 less than 2 years old it works,no leaks,but water is not coming out ,thank you for any tip.

Mar 31, 2010 | Garden

1 Answer

Where is the pressure switch located on a simoniz 1600 electric power washer?


There is a pressure switch to cut the motor once target pressure is reached. I.e. when the nozzle is closed. It's a black cheap plastic thing, right in front of the pump body. It has a white plastic lever to trip the switch. It was sticking intermittently on mine. the simoniz 1600 is quite a cheap peace of ****, needs fiddling around every time I use it

Sep 16, 2009 | Coleman Powermate DuraBuilt 1400 PSI...

2 Answers

S1600 Simoniz gun - I took it apart and I have a spring left - where does it go? I need a schematic or something.


There are no schematics available because the manufacturer doesn't sell parts for the gun. The spring usually goes right into the end of the hose, then the little bullet like valve follows. Did you know you can buy a new gun for about $22.00 Canadian?

Aug 11, 2009 | Karcher Garden

2 Answers

I have a Simoniz 1900 presure washer and had to take it apart to fix it. I need to know how to put it together again as it has been awhile since I have had a chance to work on it. Can anyone tell me how to...


i took my pressurewasher simoniz s1900 apart, i had to take off the pump and all oil leaked out.
how and where can i fill the oil in to the pump
and what type of oil would i use
thanx ernte

May 17, 2009 | Garden

1 Answer

No pressure on simoniz gas pressure washer


I have a SIMONIZ S2000 electric. I bought the unit about 8 weeks ago used it once. On the second use yesterday the unit didn't work as well, the pressure seemed only a bit better than hose pressure and soap did not dispense at any pressure. SO.... after much thought I turned the hose/tap pressure down so that I only got about 2-3 GPM instead of the typical 5-6GPM normally coming out of my hose....... it worked! Soap dispenses and spay is way better! It seems that if if the inlet hose pressure is high the pump doesn't work as well... go figure.

May 03, 2009 | Garden

1 Answer

Looking for Owners Manual for Simoniz S2600


Hi my simoniz electrc power washer will not go off when I release the trigger , leaks trough the water inlet hose , I replaced the O rings but keeps leaking ..THANKS

Apr 21, 2009 | Garden

Not finding what you are looking for?
Electrical Supplies Logo

Related Topics:

2,229 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electrical Supplies Experts

ken skalski

Level 2 Expert

152 Answers

Gene Haynes

Level 3 Expert

5245 Answers

Brad Brown

Level 3 Expert

16166 Answers

Are you an Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...