Question about Flat Panel Televisions

1 Answer

Sky remote code for JVC GM-P420E

I have moved to a house thatt has a wall mounted plasma TV (Model No above)
It is operated with a home movie set up.
The TV connections are via two cables from a scart RGB to S-Video adapter on the back of the home cinema box.
I have connected a Sky digibox to the STB scart connection on the JVC home cinema box which works fine. However I cannot programme the SKY remote to switch the TV on and off and operate the volume etc. I have tried programming the remote with the JVC 0053 code unsuccessfully.
I have tried ommitting the home cinema box by connecting the TV via the RGB to S-video adapter plugged into the scart outlet of the digibox, but then I get a picture fine but no sound.
The cables from the back of the TV are an S-video and a jack plug which are both plugged into the adapter.
Any help on solving this issue would be appreciated.
Ideally, I just want to operate the TV from the digibox.
Thanks,
Mistral

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 138 Answers

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Sky remote codes for television model 42PF9631D/10


Hi

The correct code (or whether there is a code at all) depends on which version of the Sky remote you are using. The version number of the remote can be found on a sticker inside the battery compartment. If you have "RC1600/00" "Rev 4" or "Rev 6" on the sticker, then it's unlikely that it will work with your TV, but please read on as this isn't always true.

If you have a "Rev 8" remote then it's more likely to work with your TV, however, according to Sky, you will need to buy the new "Rev 9" Sky remote:

http://www.thedigiboxshop.com/sky-hd-remotes-sky-hd-remote.html

If buying one, be sure to check the button for the "Rev 9" version ( £0.85).

The actual code for your TV model is: 0718

I suggest you try the above code regardless of which version of Sky remote you have as Sky's information is not always accurate. You can also try these generic codes for Philips TVs:

0584, 0266, 0065, 0749, 1679, 0199, 0679

Again, try these with whichever version of the Sky remote you are using. There is a good chance that one of them will operate the volume and power functions on your TV. If none of the above codes work, then you will probably need to buy a Rev 9 remote.

Hope this helps. Please post back if you need further assistance.

Regards,
BElectric



Dec 29, 2010 | Flat Panel Televisions

1 Answer

I lost the remote control of my JVC plasma tv model GMP420E. can any other model or brand of remote support it ?


No.Not a good idea etheir to buy a universal remote control's.Most of the times like 80 to 90% of the times universal remotes dose not have all the functions like the original remote.Try website like Remotes.com to buy an original remote or very close to the original remote.

Dec 15, 2010 | JVC GM P420 42 in. EDTV-Ready Plasma...

1 Answer

Need a code so that i can operate my LG tv. model no. 37LG5010 using my sky remote.


Firstly you may need to identify which version of remote control you have, versions that are dated pre 2002 may not operate the more modern TV's and a new remote control will be needed To see which version you have, open the battery cover on the back of the Sky remote and look at the text on the sticker it will state ‘Sky rev’ (or Sky+ rev or Sky HD rev), followed by a number, such as 4, 6 or 8. This number indicates the version of your Remote Control.
Version 4: May 2001 (Sky+ introduced)
Codes are 0065, or 0405,or 0037
Version 6: March 2004
Code are 0065, or 0405, or 0037
Version 8: January 2006 (includes all current Sky+HD remote controls)
Code are 1293, or 1206, or 0206
Programming the remote control
To control your TV firstly switch on the TV set, point the Sky remote at the TV, press the "TV" button on the Sky remote, then press and hold the "Select" and "Red" buttons together until the red light at the top of the Sky remote control flashes twice. Enter the code for the TV listings above (Use the 4 digit codes), the red light will flash twice if a valid code has been entered. Press the standby button on the Sky remote control, this should switch the TV set off, if so then press the "Select" button to store the settings. You should now be able to switch the TV back on and use the volume control button from your Sky remote.
If the TV did not switch off then it may require a different code, you can either start again using one of the alternative Direct codes above or continue with this process by continuously pressing "TV" then "Standy" then "TV" then "Standby" etc until the TV set switches off. This will provide a manual scan for variations within that product code

Apr 25, 2010 | LG 37LG50 37 in. LCD HDTV

1 Answer

I have lost my remote for JVC TV GM-V42S. Where can I get one? Thx Rod


I contacted JVC professional to find out the model number for my JVC GM-V42E. Once you have the model number, contact JVC and order a new one or google the product number and try using websites that are dedicated to providing remote controls, I was able to get one from avukltd.com a little cheaper and more quickly than JVC said they would have the product in stock.
I also found the remote control product number on the bottom of the plasma screen.

Apr 05, 2010 | JVC GM-V42 42 in. Plasma Television

1 Answer

Need an activation code for my sky+ remote to operate the volume on my samsung lcd tv le40s8.


switch to sky on tv and press interactive on sky remote then move down to sky customer service (select) once screen has loaded move down to programe your remote you will need model number and make of tv press select and then enter the make of tv by moving down list once found select and repeat for model then follow on screen instructions

Dec 11, 2009 | Samsung LCD-TV LE40S81B 40 in. HD-Ready...

1 Answer

I need the code to program my sky plus remote to my new lg tv it is an lg 42pq300


press intreactive on sky remote move down to sky costomer service press select then move down to program remote ( 5 ) you will need make ( lg ) and model number of tv then follow on screen instructions
hope this helps

Nov 28, 2009 | LG 42PQ30 42 in. Plasma TV

1 Answer

Wall mount for 52in tv ?


Here is a mount rated for your size TV http://www.bhphotovideo.com/c/product/518312-REG/Bentley_PLAW_6000FB_PLAW_6000FB_32_60_Flat_Panel.html

Also, be VERY careful mounting ANY plasma above a fireplace. Plasma sets are typically convection cooled to avoid the noise of fans. The heat from a fireplace will GREATLY reduce the life of the set. When people I know insist on putting a set above a fireplace I usually insist they install a cooling fan with ducting that will vent fresh air to the set. If you are concerned about the temp of your set simply consult the owners manual for operating temperature and measure the air above the fireplace yourself. BHphotovideo.com typically has good prices on mounts along with amazon. most other places like bestbuy or circuitcity will stick you on the price of the mount because they make their money from accessories. Also, why did your last set die? plasmas are typically rateed for 10+ years, did yours over heat and start to change colors?

May 17, 2008 | Flat Panel Televisions

2 Answers

Samsung plasma tv


Samsung codes for sky reomte 0060 065, 584, 037, 245, 476, 398, 516, 292, 318,
037


Click here for the link

Jan 21, 2008 | Samsung HP-R5072 50 in. Plasma HDTV

3 Answers

JVC GM-P420E Plasma no video green screen


the problem is with the micro processor on the back of the fx-1169a board (gm-p420ug) this is the board the inputs connect to . yours may be a diffrent p/n due to yours bein a "e" extention model. to repair this problem you need to remove the processor from the socket, remove the socket from the board and solder the processor onto the board. the processor is ic002 on the back side the problem is thermal in nature due to cold solder joints on the socket. i have fixed this problem many times by using this method.

Sep 09, 2007 | JVC GM-P420UG 42 in. Plasma Television

Not finding what you are looking for?
Flat Panel Televisions Logo

Related Topics:

379 people viewed this question

Ask a Question

Usually answered in minutes!

Top Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

68197 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...