Question about Audio Shelf Systems

3 Answers

Cant get the Unit to respond to the remote control

Hi In moving house i lost the remote Control for this unit i have got a replacement it swichs on the unit and i can play the Radio but i cant get any response from the CD or Tape deck,Can you help

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

My remote won't work. It will work once, maybe twice and then no response from it. New batteries, haven't dropped it, etc.. HELP !!

Posted on Sep 07, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Did you get an answers about how to set the clock/timer on the unit itself without using the remote? I lost my remote and cant set the clock.

Posted on Sep 07, 2008

Did you get an answers about how to set the clock/timer on the unit itself without using the remote? I lost my remote and cant set the clock.

Posted on Sep 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I need to order a new replacement remote control for this System.


Hi Darnell:
I'd contact the store where I purchased the unit. They should be able to either get one for you or give you information as to where to order it.
Cheers.

Feb 19, 2016 | Audio Shelf Systems

2 Answers

Panasonic SC-PM16


Just set the time, and the problem is gone. When you swich off, it will display "good-bye", then current time, then completely off.

Aug 12, 2008 | Panasonic SC-PM16 Shelf System

1 Answer

Bang and olufsen beosound 3000 does not read cd and loading stops. Can you help? Thanks


I never had like that. But "normally" there may be two reasons: CD fault or control board fault. Sometime main control keeps memorized wrong data and (in my Ouverture) CD unit simply is not responding and not loading - standing still. No way to move on except plugging off the power, press CD start on remote with no power, plug in power and try again. It clears bad data. I suspect it happened few times when I stopped CD player by remote or local main switch off.

Aug 19, 2014 | Bang and Olufsen Beosound 2000 Shelf...

1 Answer

My remote control does not work anymore for my JVC MXJ30 Stereo. How can I determine if I need to buy a new remote. The stereo works when I turn it on manually. However the CD player has stopped working....


There are a couple of things going on here.

The CD issue is, uh, common. They die. CD-cleaners are dubious at best.

http://www.repairfaq.org/sam/cdfaq.htm

For the remote, try this advice:

http://remotes.com/remotes/servlet/rs?=Display&contents=help_deadremote&uuid=A12954406270641

"Dead" Remotes Can Be Saved How to Re-Start Your "Dead" Remote Control
This only takes about a minute and will restart 1 in 3 "Dead" Original Remote Controls. Good Luck!
-----------------------------
Step 1- Pull the batteries out of the remote and leave them out until Step 4.
Step 2- Press and release each and every button one at a time on the remote control until every button has been pressed and released at least once!
Step 3- If your remote has slide switches, you must move the switch to each position then repeat the button pushing in Step 2.
(When you're done, be sure to put the slide switch in the correct position to operate the
unit the remote came with!)
Step 4- Put the batteries back into the remote, being very careful to install them correctly. New batteries should be used if you're not sure about the old ones.
Step 5- Try the remote.
Special Note:
If you have a digital camera, camcorder or camera phone you can test the remote to see if it is emitting a signal. Face the remote towards the lens of the digital unit until you can see the front of the remote. Depress any button on the remote. You should see a light (steady, blink or flashing) being emitted from the remote. If you do then the problem might not be the remote but the sensor on the unit.

==

eBay has some RM SMXJ30J remotes cheap. This one will set you back $11.50 delivered.

http://cgi.ebay.com/JVC-RM-SMXJ30J-REMOTE-CONTROL-/120717037068?pt=LH_DefaultDomain_0&hash=item1c1b4bce0c

May 07, 2011 | JVC MX-J30 CD Shelf System

2 Answers

The unit doesn't respond to the remote. If I unplug it, it seems to reset. Sometimes it will not even respond to the power button on the unit itself.


9 times out of ten its the remote being the issue here try replacing the batteries ir cleaning the front where the remote sensor is that may help it. If you try-ed resetting the remote and still have issues this the remote will need to be replaced.

Thanks and do please click the accept button for my efforts.

Jan 02, 2010 | Nakamichi SoundSpace 5 Shelf System

1 Answer

I have lost the instructions for my MofS hi fi MOSAS079X and I cant get mi ipod to play music on it I can get radio to work ant the ipod comes up it just wont let you hear the music


quoted from the instruction booklet

'1. press STANDBY button on either the remote control or main unit.

2. press the FUNCTION button until iPod mode is selected.

3. Carefully insert your iPod into the iPod dock.

4. To start playback, press the PLAY/PAUSE button.'

hope it helped :)

Jun 09, 2009 | Sony STR-D600SS Shelf System

1 Answer

Rs2100 bookshelf stereo


The Audio System does not respond to the remote control.
1. To reset their connection, turn on the remote control and switch the Audio System to Standby mode.
2. In Standby mode, press and hold both INFO and SOURCE on the front panel of the Audio System. It is reset to default when"RF ID clear" displays.
3. Press and hold both PROGRAM and SELECT on the remote control. When “ID claer” displays on the LCD of the remote control, the connection is reset.
4. By now the remote control and the Audio System should be connected to each other. Press and hold PROGRAM and SELECT on the remote control again. When
“ID Locked” displays on the LCD of the remote control, the connection between the remote control and the Audio System is locked.

Jun 06, 2009 | RCA RS2100 Shelf System

3 Answers

Remote control stolen


Hi,

Please see the link below to view the original remote for this unit.

CMT-HP7 Original Replacement Remote

Mar 27, 2008 | Sony CMT-HP7 CD Shelf System

1 Answer

I've lost the remote for the CMT-NE5 and I do not know how can I activate the "MD" FUNCTION


Hi,
You could try purchasing a 3 In 1 universal remote control unit.
These usually scan to find the matched frequency of your appliance, then you can turn on/off with the remote.
These are however limited, and you may not get all of the functions. As with the original remote as supplied.
Alternatively, contact your local supplier, they should be able to assist you further.
Mike @ Compurepair.

Feb 24, 2008 | Sony CMT-NE5 CD Shelf System

Not finding what you are looking for?
Audio Shelf Systems Logo

Related Topics:

339 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Shelf Systems Experts

The Knight
The Knight

Level 3 Expert

68157 Answers

 Grubhead
Grubhead

Level 3 Expert

4576 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you an Audio Shelf System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...