Question about InSTEP Quick N' Lite Bike Trailer

1 Answer

Bike attachment part

I need a second bike attachment part so we don't have to keep swapping out between bikes to pull the trailer. How can I get one ordered?

Thanks
Shawn
sblaesing@gmail.com

Posted by on

  • lizzib123 Aug 31, 2008

    bike has been stolen along with trailer attachment. i need new attachment before i can use trailer again on another bike. is it possible to order this part?

  • Anonymous Dec 26, 2008

    I HAVE THE SAME PROBLEM, BIKE WAS STOLEN AND NOW I HAVE A NEW BIKE BUT NO HITCH. THANK YOU VERY MUCH.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Went to instep website and found part

Posted on Aug 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

I am looking for a new coupler for my InStep Pathfinder 12-PF250 bike trailer. How do I get a new one?


Hi bethiel.
Here Amazon com Coupler Attachment you can choose between many models. (before order something ask the seller if fits on your bike)
hope this was helpful...
enjoy choosing :)

Aug 28, 2011 | InSTEP Pathfinder Bicycle Trailer

1 Answer

Where can i buy the trailer coupler which attaches to my bike


Didn't it come with it? I just bought mine yesterday and it doesn't have it. Is it supposed to be included?

Apr 16, 2010 | InSTEP Quick N EZ Bike Trailer

1 Answer

I just bought an InStep® Joyrider Bicycle Trailer and the photo's are not very good. When attached is the bike trailer hitch supposed to attach perpedicular to the bike and the spring bends to 90 deg....


The hitch part that fastens to your bike rear axle has 3 pieces, a dimpled washer which goes on first then the hitch plate and a pin that holds the trailer to the hitch. Take off the axle nut (15 mm wrench) install the dimpled washer it goes on with the 90 deg tang facing the bike wheel and in the channel so it can't rotate. Then put the hitch plate on, mine faced down for the correct height, line up the dimpled washer with the bumps on the hitch plate to locate it properly. reinstall the wheel nut and be sure to align the wheel so it runs straight and true (I oopsed on this the first time) then attach the trailer, it is a 90 deg hook-up then you simply put the the pin in and you are good to go. The unique hook-up makes it so smooth and dampened that you don't even know it's behind you. We really love ours!

Apr 15, 2010 | InSTEP Quick & EZ Bike Trailer

1 Answer

Can't find a replacement tube for wheel on instep bike trailer


http://www.1st-babies.com/joggers_strollers_trailers/Instep_Stroller_Replacement_Tube.shtml

Jul 06, 2009 | InSTEP Quick N EZ Bike Trailer

2 Answers

How do you put it on your bike


on what part of the bike do you attached to

Jun 17, 2009 | InSTEP Quick N EZ Bike Trailer

1 Answer

Dont know how to instal to the bike trailer to the bike


with more info i could help a little more but... these will normally attach. either "cliping/screwing" onto the seat post, see your instructions or pictures online. hope this helped a little.

Jun 15, 2009 | InSTEP Quick N EZ Bike Trailer

1 Answer

Fits Cannondale


Unless your rear chainstay/seatstays are some bizarre configuration or have a disk brake, this trailer should work fine.

Aug 17, 2008 | Dreamer Design Spree Aluminum Bike Trailer

Not finding what you are looking for?
InSTEP Quick N' Lite Bike Trailer Logo

Related Topics:

527 people viewed this question

Ask a Question

Usually answered in minutes!

Top InSTEP Sport & Outdoor Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

kakima

Level 3 Expert

96396 Answers

Are you an InSTEP Sport and Outdoor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...