My hp printer is crumling my paper.Whenever i try to print something out it wont come out

Have the memory inside the printer tested. Add as much printer memory as you can to the printer to speed it up.

Shabbir,

First I would try a "heaver" weight paper in place of your current paper.

Second I would look for something blocking the paper path...maybe a piece of paper got stuck.

Hope this helps...

Here is the link to the manual from HP:
http://support.hp.com/us-en/product/HP-LaserJet-M1130-Multifunction-Printer-series/3965842/model/3965843/manuals

Topbarhive

verify the paper senzor my be somme paper there or dust

1. goto control panel -> printers.
2. delete the unnecessary printers including your D4260.
3. Use the driver cd which came along with your printer and reinstall all the software and drivers again.
4. Now you should be able to print without any problem because in this way all the driver conflict or corrupt printer files will be fixed.

I hope this is helpful to you
thanks

It's a possible hardware issue in the feeding mechanism. Try to remove the cartridges from the printer then close the cover. Remove the sheets of paper. Unplug the printer from the power source. Wait at least 30 seconds before plugging back the printer to the power source. When the printer's ready, reload the cartridges. Load some paper but don't overload as this may send wrong information to the printer. Have the paper guides lightly touch the sides of the paper, thus avoiding shifting of paper when it feeds. Let it print an alignment page and do some test prints from computer. If problem persists, I strongly suggest you contact Lexmark Technical Support to further investigate the problem. Thanks.

Click Here & Fix Your Paper Jam iSSue.
Thanks for using Fixya. Anand Kumar

no sensor but what you need to do is to go into the properties of the printer in the printer icon in the control panel. In there will be a way to put the printer thru a realignment and once that is done the print should come out properly.

If the paper size in the word document is set to something other than "letter" example if it is set to legal. Then the lite is lit to let the printer user know it is waiting for him to place a sheet of legal paper in the printer, he does so and then presses the green button to start the print job. You can check this by going to "file-page setup" in word and look for the paper size setting.

Try this...
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01578337&lc=en&dlc=en&cc=us〈=en&rule=8331&product=374568#scanner_fail

Hi, try using HP brand photo paper, HP makes their special photo printers and special photo paper for them.
The surface of the back of the HP's paper is rough, like sandpaper to avoid the paper being jammed in the cheap loading mechanism of their actual printers.