Question about Hitachi Projection Televisions

Open Question

Have just bought a P42HO1AU and cannot tune in the digital channels

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tunning in all digital stations


Don't know if this was the problem, but I was trying to go through the tuner for the saterllite stations. I tried going through the VCR/DVD unit and now all the channels are tuned. Only problem now is how do I tape a channel through the VCR? I can't seem to tune in the VCR.

Oct 03, 2009 | Projection Televisions

1 Answer

Cant get certain channels


you may need an outside antenna Digital tvs need a strong siganl easy fix just hard on the wallet

Jun 22, 2009 | Samsung HL-S5086W 50" HDTV

1 Answer

Programming Channels


Your TV is likely set for "AIR" tuning rather than "CABLE" mode. In this case channels above 13 don't tune correctly. The tuning mode is adjusted through the setup menu (it's been too long since I've seen one of these to remember exactly how the menu looks). Once you set the tuning mode for cable, all the available channels should come in properly.

But you've said you have satellite, so you should have a satellite receiver connected to your TV, and you'd be changing channels there rather than on the TV. Your TV would be staying on channel 3 or 4 (if using the satellite antenna output connection), or on the A/V input you have the satellite connected to (if using the direct A/V outputs). Am I missing something about your system?

Feb 18, 2009 | Mitsubishi WS-73905 73" Rear Projection...

1 Answer

Hitachi T.V. remote CLU3842WL will not change channels.


There are two possibilities: either the channel memory has been lost due to the TV being unplugged for an extended period or the digital tuning system has a defective component. First thing to do is go into the TVs menu system and try to re-scan the channels. You may find that you can change channels after doing this. If its still not changing channel, the digital tuning board will have to replaced.

michtech

Feb 15, 2009 | Hitachi Projection Televisions

2 Answers

Bought a proscanlcd hdtv 32lb30Q unable to get cable signal


Hi and welcome to FixYa,

Initially, pls confirm if below is how it is wired using a coaxial cable and not 3cable RCA to RCA:
  • Charter Digital Cable > DVD/VCR > TV
If yes and your concern is snowy or no signal on the TV screen, might it be that you have to power OFF the DVD/VCR when selecting channels on the TV itself (including when channel setup is being done).

Alternately, you can tune the TV to channel 3 and let the DVD/VCR do the channel selections.

Pls post back results. Good luck and thank you for using FixYa.

Jan 26, 2009 | Projection Televisions

1 Answer

Samsung tv problem


Hi.

You havent listed your TV model but most Samsung sets that are digital will have A button on the remote marked DTV this will tell set to look at the digital chans.
Now try & go in to the menu & select tuning & scan the digital chans in.
One other thing are you in an area of the UK that can pick up digital channels without changing your aerial.

http://dysonmanuals.llc.nu/

Chris..

Mar 07, 2008 | Projection Televisions

1 Answer

Digital TV Tuning problem


I would try letting the set autoprogram again.

Mar 07, 2008 | Projection Televisions

2 Answers

Grundig colour tv lost digital channels


I'm sorry, but I have not worked with Grundig TV's, radios yes, TV's no. However, The menu shouldn't be hidden. The first thing I would try would be to UNPLUG the set from the wall, wait about a minute and plug it in again. This action should reboot the micro processor. On some sets, there are two levels of menus, main and advanced. You would want "channel setup" and /or channel scan. You may also look in the back of the manual and see if it list some service dealers that you could call for help. I hope this helps.
Electrode

Mar 03, 2008 | Projection Televisions

1 Answer

Tune playstation 3 to toshiba television


first try to manuall select your av channell from your tv's remote control,if this won't work try another scart cable or port on your tv set

Dec 26, 2007 | Toshiba 55H70 55" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Hitachi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...