Question about Philips Magnavox Learning Universal Remote

11 Answers

Code for universal remote rm-810

I need the codes for IDIGITAL RM-810 Universal Remote controller
My TV is Panasonic

Posted by on

  • 3 more comments 
  • kriegs warri Nov 27, 2008

    I need the code for a panasonic TV with the rm-810 remote.

  • mannymuscat Dec 07, 2008

    i need code for rm-810

  • teddy morales
    teddy morales Dec 05, 2013

    I need codes for panasonic tv using a GE universal remote

  • Anonymous Mar 15, 2014

    Manual ante rm 309 es tv remote control

  • Anonymous Mar 15, 2014

    Manual ante rm 309 es tv remote control

×

11 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

There is an easy way to setup this remote controllerl(RC). It called "Automatic Code Searching" which means that you don't have to even find the code. The controller will searching it for you. Just do the following steppes.

1. Turn on the "Device" to be remotely controlled, e.g. TV, VCR.

2. Point the RC right to the "Device" .

3. Press a device button on the RC represent the "Device", e.g. TV, VCR, DVD etc. You can see the indicator lid flash once.

4. Press the SET and than the POWER button on the RC. hold both buttons for 2 seconds or more, you will see the red lid on. then release both buttons simutenously. after that the indicator lid will be flashing, means the searching started.

5. Keep pointing the RC to the "Device" until it is shut down by the RC, Press any button in 1.5 second to finish the setting.

You can try the RC now. It should work. My one is working.

Posted on Apr 09, 2010

  • Nonong La Sangre
    Nonong La Sangre Apr 14, 2017

    Hi Jia thanks a lot for your automatic code searching tip. It worked for my Cybertec RM 969E remote control and now able to use it to my Toshiba Regza TV. I spent 2 hours searching for the code since I lost the manual for the Cybertec RC until I came across your tip. I saved it for future use. Excellent and very helpful tip!

×

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The manufacturer's website is www.chunghop.com/en
The RM-810 Remote is listed under combination remotes, easy to find if you look. There is a Zip file of the original documentation you can download, or if you look for the link on the main page it gives you directions on ow to program your remote.
It may take some time to understand, but its in chinese or korean or something, so have a little patience.
Have had this remote for a few years. It is very good, except make sure you dont press the set button by accident when pointing it at the tv. You may risk un-programming the remote and have to go looking all over again for the codes.
I hope this is helpful, and good luck with it!!!

Posted on Sep 05, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The instructions were in the packaging for me, Anyway direct link for the documentation (that are as images) is http://www.chunghop.com/pics/shuom_2008519164535.zip (thanks to venus_angel for the origional post reply)

Posted on Aug 21, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The site seems to be down, can someone please email me the manual?

johno69 [@] gmail.com

Posted on Dec 30, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 42 Answers

My suggestions are take the remote back. I've traded mine in 3 times and tried it on all 6 tvs and 6 dvd players and 3 cd players and it doesn't work.

Posted on Aug 19, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi i have purchased a IDIGITAL RM-810 Universal remote control, but it has not directions to us, i have tried to go on manufacturers website www.chunghop.com/en but i get the message: Internet Explorer cannot display the webpage. What can i do?

Posted on Jun 10, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

According to the instructions that come with it the codes for Panasonic TV's is 1209 or 1292

Posted on May 05, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I need some code for a GVA TV

Posted on Apr 28, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I need the code for a sanyo tv

Posted on Jan 19, 2011

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a changhong lcd tv and i dont have the code for my remote rm-810

Posted on Oct 09, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

From booklet Panasonic try 001, 003, 019, 037, 040, 106, 110, 111, 112, 114, 190 (worked for me)' 212 & 241 - Hope this helps LEN

Posted on Sep 14, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

8 Answers

Chunglap RM-133E codes


iam asking for the code of sharp t.v for chunglap remote controler thankyou./.

Apr 03, 2012 | Televison & Video

1 Answer

I need the idigital rm-810 universal remote codes for **** smith set top box


Hi, I do not have the codes for it. Most likely you will have to get an original remote for you smith set top box to work it. I do not believe a universal will work with your unit.

Oct 23, 2011 | Philips Magnavox Learning Universal Remote

4 Answers

I have a chunghop rm-309ES universal remote. I lost it's codes. My TV is Panasonic. Can you give me the codes so i can use my remote again and can you teach me how to set the codes. Thanks. :)


Hello
Codes for Panasonic with Chunghop RM series remote control are:
0001/0003/0019/0037/0040/0106/0110/0111/0112/0114/0190/0212/0241/0711/0745/1036
If you are in need for a three digit code; remove the first Zero from each code and take the rest three digits.
Eg: for 0001 [four digit code] (001) is its three digit code. OK.


Jul 11, 2011 | Universal Remote Control Remote Control

1 Answer

I digital universal remote RM-810 - need code for


Try 184 for the NEC TV.
Please rate this solution. Thanks.

May 28, 2010 | Universal Remote Control Remote Control

1 Answer

I have a idigital rm-810 what is the code for my telefunkin plasma tv modal no 2842


This is he only code listed fo telfunken in the Master URC code book

Telefu nken 0 0 5 6


Please rate my help++++Thanks for using FIXYA

Jan 12, 2010 | Televison & Video

2 Answers

Need the code of remote control


It depends on what device name and model you are using it for.

Here is a list of sites that have remote codes:
www.remotecodelist.com
www.tvcodes.com
www.remote-codes.com
www.hifi-remote.com/ofa/codes.shtml

Sep 05, 2009 | Philips Magnavox Learning Universal Remote

1 Answer

I need the idigital rm-810 universal remote codes


the remote you brougt is a dud because i have never heard of one of then remotes working i know from 3 remote duds

Sep 02, 2009 | Philips Magnavox Learning Universal Remote

Not finding what you are looking for?
Philips Magnavox Learning Universal Remote Logo

14,079 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72214 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...