Question about Epson Stylus CX3810 All-In-One InkJet Printer

2 Answers

Printer problem when I try to print the paper goes thru the printer without printing. if I try to print again it usually prints. I get a paper not properly loaded error box. Please letme know what is wrong. bobcat

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

It sounds like the paper weight you are trying to use is wronng, or you didnt fan the amt of paper you feed into the paper port first. i find that if i fan the paper a few times before i insert it into the paper feedtray,, that i dont get paper errors, or mis prints.. also check the printer properties to see if you have the print to spool unchecked and or the number of sheets to which prints out, like the header page and then trailing pages that really have nothing on them , if that makes any sense ...... just an idea ...

Posted on Aug 19, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    MVP:

    An expert that got 5 achievements.

    Prodigy:

    An expert who has answered 500 questions.

    Sergeant:

    An expert that has over 500 points.

  • Master
  • 564 Answers

Check the type of paper..that type that's for copiers is NOT recommended for printers.

http://tinyurl.com/6qcpgy

Posted on Aug 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The printer isnt working keeps telling me printing complete


Follow the steps below to fix the problem:
1. Align the print cartridges (open the Lexmark Solution Center on your computer > from the Maintenance tab, click Align to fix blurry edges > click Print) 2. Clean the print cartridge nozzles (open the Lexmark Solution Center on your computer > from the Maintenance tab, click Clean to fix horizontal streaks.) 3. Remove and reinsert the print cartridges. 4. Wipe the print nozzles and contacts using a slightly moistened soft cloth to clean it from dirt or clogs.
Try to print a document again to verify that the problem is fixed.

Oct 22, 2011 | Lexmark Z1420 Printer

1 Answer

HP LASERJET 1020 JUST STOPPED PRINTING. THE IMAGE DIDN'T FADE WITH USE LIKE THE TONER CART WAS GOING. IT GOES THRU ALL THE MOTIONS BUT THERE IS NO IMAGE. CAN THE TONER JUST RUN OUT. REALLY DONT WANT TO...


Hi there !

You don't mention clearly the problem. If your cartridge is new, there will be no problem in it. The problem it the document, you are printing. Check the printing file document.

If you it stops printing, runs out of paper and red light is blinking. all you have to do is to open the cartridge door and closed it to resume on printing.

The usual sign of toner end is print out is getting faded until nothings printing.

If still the print does not print, just refresh your printer by turning it off and then turn it on again.

I hope it help you find the problem and Good Luck. Thank you for using FixYa !

Jan 06, 2011 | HP LaserJet 1020 Printer

1 Answer

Paper goes thru printer without printing


Look if you do the paper correctly in the printer and if you have enough colour to print then it should go^^

Sep 09, 2009 | Epson Stylus C120 Color Printer InkJet

1 Answer

Paper Jam message on every print job.


I have the same printer without the doc feeder. Check the paper trail thru the printer for the paper sensor lever hanging up. It gets pushed up by the paper and can stick, making the printer think it still has paper in it. Pulling the cart unsticks it till you print again.

Jul 03, 2009 | Samsung SCX 4521F All-In-One Laser Printer

1 Answer

Got MP130 series printer. Was working alright up till now, now paper goes right through without stopping and not printing anything.. When it does occasionally print, the writing is blurred and not...


My did that all the time too, but I always ran it thru the clean the rollers maintance the canon has on its driver, Did it three times then ran heavy grade of stock paper in thru there and almost always lint, dog hair, or whatever was in there comes out on the stock paper then it runs good again. ladytstarlight.

Apr 16, 2009 | Canon PIXMA MP130 All-In-One InkJet...

1 Answer

My printer will not print. the paper goes thru the act of printing but there is nothing on the paper


I accidentally solved a total malfunction problem in my HP PSC 2110 by simply leaving it unplugged overnight. When powered up again it was back in action.

Aug 20, 2008 | Printers & Copiers

1 Answer

Doesn't print!


u sure litte thing on new ink is off platci cover that protects them download the latest driver ok from kodak website try it again thx nick

Jun 16, 2008 | Kodak EASYSHARE 5500 All-In-One InkJet...

1 Answer

Wants to print but won't put ink on paper


I'm experiencing the same problem. I tried to troubleshoot through software that came with printer, but no luck. Here's what happens:

The printer worked great for a month or so. Then, I didn't use it for a few months. When I tried to use it again, it acts like it's printing. My computer shows it's printing, the printer runs through all the steps, including moving the print cartridges back and forth over the paper as it should, but no ink comes out on paper.

Any suggestions?

Nov 05, 2007 | Lexmark X1270 All-In-One InkJet Printer

Not finding what you are looking for?
Epson Stylus CX3810 All-In-One InkJet Printer Logo

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Printers & Copiers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Cindy Wells

Level 3 Expert

4761 Answers

Are you an Epson Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...